ZVS 3000W DC Voltage Induction Heater Module Flyback Driver Heating Board

Description: ZVS 3000W DC Voltage Induction Heater Module Flyback Driver Heating Board This Induction Heater need 3000W DC power supply to driver heating material. (This listing not included DC 3000W power supply)(Recommend DC48---DC58V power supply) or buy PSU from this link: https://www.ebay.com/itm/283457630476 Specification: Working voltage: DC24---DC65V Working current: 10A--65A (rated 55A, short time: 55A--65A) Heating rated power: 3000W (set at DC 53.5V) Copper tube resonance frequency: about 60KHZ--65KHZ (measured under the default copper tube Magnitude) Circuit board size: 270*105*100MM Undervoltage protection: protection when the power supply voltage is less than 20V (display U<20V) Over-temperature protection: protect when the heat sink temperature is higher than 65C, (display ℃>65), and return to normal when the temperature drops to 55 degrees Overcurrent protection: when the heating current is greater than 65A, or when the copper tube is short-circuited (display A>65A) Mos tube breakdown short circuit protection: yes (display MOS-XX), need to check MOS tube and replace. Anti-reverse connection of heating power access: yes Pot detection function: Yes (on and off can be set manually) Whether the water pump fan is automatic: yes (can be set manually to select automatic and on) Pump circulating water consumption: short-term work of 5 to 10 pounds of water / long-term work of more than 20 pounds (water temperature is hot, you need to change the water, too high water temperature will damage the pump) Metals and materials that can be directly heated: iron, steel, stainless steel, tungsten steel, graphite crucible, etc. (Metals whose names contain iron or steel can be added directly heat) Metals that are difficult to heat without heating are: gold, silver, copper, aluminum, tin, lead, etc. Those whose names do not contain iron and steel characters are basically difficult to induction heat or do not heat! Direct heating metal temperature: 53.5V voltage: solid about 700 ℃ (reddish) hollow thin tube about 900C (red light) Heating graphite crucible temperature: 53.5V voltage (and cover insulation sheet) the highest: about 1600C, (the voltage is also a little lower than the temperature when the welding machine is powered by a hundred degrees: about 1500 ℃) Gold, silver, copper and other non-ferrous metals can not be heated directly. Graphite crucibles should be arranged to be heated in crucibles. Application: DIY small iron and steel parts for quenching, annealing heat treatment, melting point below 1500° C metal smelting ( Graphite crucibles), CNC Tool Heating, small electromagnetic furnace, etc. For larger parts, it is recommended to add an ammeter to monitor the current to prevent the main board from burning down. Small iron and steel parts for quenching, annealing heat treatment, melting point below 1200 C metal smelting, DIY small electromagnetic furnace, etc Package Contents: (not included DC power supply) 1x Induction Heating Board 1x Spiral copper pipe 1x Water pipe 1x Mini Water Pump 1x Adapter International Buyers – Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are afforded by the buyer. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.

Price: 142 USD

Location: GD

End Time: 2025-01-10T08:59:10.000Z

Shipping Cost: N/A USD