Yamaha XS250 Dual Mikuni VM30 Carb Conversion Kit

Description: Mikuni Oz Product Description This kit is available with or without the mounting flanges supplied. Please note: This kit comes pre jetted.The initial jetting setup on this carburetor kit is a starting point only. As there are too many variations around the world no two bikes are the same. We have tried to get the jetting as close as possible to the original but sometimes this may not be the case with your bike and you may need extra jets. We also recommend 91 or 95 Octane fuel only in all of our carburetors.For the Yamaha XS250 we recommend the VM30 carbs for better torque and performance, even though the stock carbs are a 32mm you must allow for the area taken by the shaft and butterfly in the throat which consequently makes for a much smaller venturi than 32mm, which also has an air flow interruption factor. Going faster has never been so easy, say goodbye to hard starting, irregular idle, hesitations, and flat spots. The VM30 Carb Measures 58mm diameter at the air-filter inlet end, 96mm front to back and 40mm diameter at the outlet end. The Dual Mikuni VM30 carburetor kit is easily fitted to your Yamaha XS250 and the improvement is instant. This kit includes our shorter 70mm long POD filters, CNC machined silver anodised manifolds with heavy duty rubber boots and a nylon lined premium quality throttle cable with 70 degree lower and chrome plated top fitting to suit your OEM throttle housing. The most commonly suited jets for Australian fuel and conditions have been fitted as well as spares for fine tuning the top end at WOT. Climate, altitude and fuel density from different octane fuels all have varying effects on final fine tuning as does cam, exhaust and cylinder head porting etc. Please do contact us if you believe further fine tuning is required and we can guide you through the process. Once tuned a VM Mikuni will not go out of tune for many years. At Mikunioz, for over 30 years, we have been constantly checking and where necessary upgrading our jetting specs as fuel quality changes. Regular fuel in the USA is 85 octane or 91 in their premium brands which have numerous additives and blends added (basically smells and drys like wood varnish) which results in a totally different jetting spec and product performance. This carb as supplied from the factory will never work on this bike and requires a total re-jet which is done here before shipping. You will instantly experience better throttle response, improved acceleration, increased horsepower and torque. Our premium grade cables use a Nylon lined outer housing. The Nylon liner inside the outer cable housing conduit is for reduced friction and heat resistance. They are supplied with shortened 70 degree lower cable end fittings for better petcock clearance, an inline adjuster on the top cable and a chrome OEM type top fitting for attachment to the stock Yamaha XS throttle housing. All throttle cables must be lubricated during installation with cable lube or a very light oil such as 3 in 1 to avoid clogging. Besides the need to lubricate the inner wire in the housing, the cable end barrels at their pivot points should be lubricated with water proof grease.If you need to clean your cable which is particularly relevant for dirt bikes. We recommend using WD40 or a very light oil such as 3 in 1. This effectively washes away dirt from the cable, without clogging it. Additional Information: Please Note: Other than exact replacement OEM carburetors, all Mikuni Aftermarket Carburetors and Tuning Components are sold “As Is” for Off Road / Racing Use Only and are not intended or approved for use on vehicles operated on Public Roads or in locations where applicable engine tampering and anti-pollution laws apply. Australian Shipping Information: All shipping within Australia is via Australia Post only. Please note that we are located at Townsville North QLD and that all standard shipping “Free Freight” travels by train from us all the way down the East Coast as far as Victoria. EBay freight times are estimates only and do not take in to account our location. We have express options available for all our products also. The freight times around Australia are as follows- Standard or eBay “Free Freight” Townsville to Brisbane 3 days, Townsville to North/Just South and West is usually 1-2 days, NSW ACT & VIC 4-6 days, TAS & SA 4-8 days, WA & NT 8-12 days. Express Freight Anywhere in QLD except some rural areas is next day delivery. NSW ACT & VIC 2 days, TAS & SA 2-3 days, WA & NT 3-4 days. Please note that weather events such as flooding, cyclones and other natural disasters etc will delay any ground freight. This is entirely out of our control if this occurs. International Shipping Information: All international shipping is done through Australia Post Express Courier EMS service. The international service we use is generally 4-5 Business days for delivery but can be shorter or longer. All international buyers are responsible for the payment of their domestic customs duties and taxes charged on imported goods. The duty-free threshold and duty/taxes payable rates differ from one country to another and we strongly advise you check your liability before ordering if unsure. Please check your tracking on all international shipments within 7 days to follow their progress and determine if it is being held by your local customs dept. or on their behalf by the Postal Service, who you will need to contact using the provided tracking number. As per the eBay terms and conditions, WE ARE NOT RESPONSIBLE AS A SELLER FOR YOUR COUNTRIES IMPORT DUTIES OR TAXES, WE HAVE NOT NOR WILL WE EVER PAY YOUR IMPORT DUTIES OR TAXES, OR REFUND ANYONE FOR THEM AND THEY ARE DEFINITELY NOT INCLUDED IN THE ITEM PRICE! PLEASE CHECK YOUR COSTS BEFORE MAKING THE PURCHASE! THIS IS JUST PLAIN OLD COMMON SENSE. Please also note that international parcels HAVE to be signed for and all parcels whether domestic or international are fully insured. Returns and Refunds: Our business Warranty or Return period is 7 days only. We do accept eBay’s 30 day return policy but please read all the information below carefully before making your purchase. THE FOLLOWING INFORMATION IS FINAL. Here at Mikuni OZ we do offer refunds and returns but there are strict procedures for this. All carburetor kits that need to be returned for refund or exchange MUST be returned in the exact same way they left the warehouse. All Carburetors & Carby kits that have been opened WILL BE thoroughly stripped and inspected, in the case of any fuel being added, greases or lubricants, tampering or any form of damage to the carburetor there will be ABSOLUTELY NO refund and the kit will be returned to you at your expense! THIS IS FINAL AND NO OTHER EXCEPTIONS! Absolutely all returns for any reason will be charged a 10% restocking fee whether it has been opened or not before it was returned and the freight for us to send you the kit originally will be deducted also before your refund is issued.

Price: 835 AUD

Location: Townsville, Queensland

End Time: 2025-01-03T03:27:32.000Z

Shipping Cost: 0 AUD