YAMAHA BANSHEE **NEW DRIVELINE DESIGN**TRENCHED FOR 7/10MIL CUSTOM BANSHEE CASES

Description: These are our brand new die cast Driveline Banshee cases that we have been developing for the last 5 years. We have made a lot of changes to the OEM design while still retaining the stock look as best we could. We have added extra material in all the places the stock cases were lacking for today's larger stroke cranks and aftermarket cylinders. You can trench these cases up to a 14mm stroke without any epoxy or welding. The top case can be bored and machined to fit any stock or 68mm bore size along with larger bores like the Super Cub, Chubby Cub or DM cylinder. This set of cases are Pre-trenched which will fit a 7mm crankshaft or a 10mill crankshaft. You can fit any cylinder that you are using for your 7mm or 10mm crankshaft and have a lot more top gasket sealing area compared to OEM especially with CP cylinders that have larger transfer areas.The folllowing items are included with every case set: Top case cylinder studs: Qty = 10 (We add 2 extra longer studs for cub style cylinders) Lower case studs: Qty = 8Front and rear mounting dampners: Qty = 4Case/side cover locating dowels: Qty = 3Cylinder locating dowels: Qty = 4Shift shaft bushing: Qty = 1Shift fork shaft plugs: Qty = 2Kick starter assembly mounting post: Qty = 1Clutch actuator bearing: Qty = 1

Price: 975 USD

Location: Ortonville, Michigan

End Time: 2023-09-22T16:00:11.000Z

Shipping Cost: N/A USD