Xpeed Green iridium mirror shield + clear + ratchet kit Joe Rocket motorcycle

Description: In Factory sealed bag the Xpeed street full face helmet Green mirror iridium. Shields have a 3/4" OD raised round circle on the shield tab ends.THIS WAS REALLY HARD TO PHOTOGRAPH. FROM THE OUTSIDE IT IS GREEN BUT WAS BLUE STREAKS WHEN YOU TILT IT. FROM THE INSIDE LOOKING OUT IT IS DARK SMOKE BROWN. You get:(1) Green iridium shield(1) Clear shield(2) Side brackets(4) Plastic bracket screws NOTE: This ratchet kit will replace your current Joe Rocket plates. These hold the shield more FIRM because they are spring loaded (like the HJC brackets). You will NOT be able to use any new products Joe Rocket shields that have the 7/8" raised round circles with these brackets. Note: Shield does not have the decal on the tab end as shown in picture. Made in Korea. Appears as a dark tint when looking from the inside to the outside. Fits all Joe Rocket helmets produced by Xpeed. Shield embossed with XD-1 identifier. We have the non XD-1 shields also (Xpeed only used two different designs, the other has a 3/4" OD circle). We have replacement ratchet plates and other colors of shields (Dark, medium, blue, pink tints and clears). Call with questions. Dave (208) 651-6433 CARE OF YOUR IRIDIUM SHIELD The iridium coating on the outside of this lens is VERY easy to scratch. NEVER dry wipe off the lens or use any chemical cleaner. To properly clean the shield: 1) Remove the shield from the helmet. 2) Hold it under runner water. 3) Apply Dawn dish washing detergent to the lens and with your clean hand gently rub the shield to loosen any debris. 4) Thoroughly rinse under running water. 5) Pat dry the shield with a 100” terry cloth cotton towel. Do NOT wipe it dry.

Price: 49.95 USD

Location: Monmouth, Oregon

End Time: 2025-01-01T00:13:21.000Z

Shipping Cost: 5.49 USD