XL/Spectracom/Pendulum Path Align-R 2241 Microwave Antenna Alignment Test Set

Description: XL Microwave/Spectracom Path Align-R 2241 Microwave Antenna Path Alignment Test Set with Record-R (Data Logger) Comes with a manual and what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from XL Microwave/Pendulum/Spectracom and may vary slightly due to upgrades, options, or revisions this unit may or may not have. This is a set of 2 units. They ship fully tested and guaranteed to work. Each unit's calibration sticker says they were calibrated in January, 2014 and due January 2015. The Serial Number Tag's Read: Model Number: 2241 Options: None Serial Numbers: 1240848005 and 120848006 Accessories Included: AC Adapters & Power Cords Semiflex Test Cables, Right Angle SMA(F) to Straight SMA(F) Soft-Carrying Cases with Wrenches Plantronics Audio Headsets (the foam is breaking and needs to be replaced) 1 Manual and User Information Card NEW Batteries will be supplied Key Features: Battery-powered antenna alignment transceiver test set (pair) Continuous voice communication with included headsets Tuneable operating bands: 1.5 to 23.5 GHz (2240/2241) Available with Record-R GPS Data Logging (Model 2241) Tone ranging provides variable pitch indication of path loss Path loss displayed in dB, updated every 300 ms Description: The Path Align-R test set is a high performance, complete test solution design to quickly and accurately optimize the transmission path between two microwave antenna sites. The Path Align-R directly drives the site's antennas, allowing the optimization process to be done without the need for on-site radios, complex test equipment, ground technicians, onsite AC power, cell phones, or two-way radios. Transmitter Specifications: Transmission: Full-Duplex (simultaneous transmission and reception). Transmitter Output Power: 0 dBm, nominal. Tuneable Frequency Bands: Band 1 Range: 1.8 to 2.5 GHz, resolution 1.0 MHz Band 2 Range: 3.8 to 5.0 GHz and 5.8 to 6.6 GHz, resolution to 1.0 MHz Band 3 Range: 7.5 to 10 GHz and 11.0 to 12.0 GHz, resolution to 1.0 MHz Band 4 Range: 18.1 to 19.4 GHz and 22.0 to 23.5 GHz, resolution to 1.0 MHz Transmit/Receive Connections: (4) Super SMA female sparkplug connectors (front panel). Modulation: FM Deviation: 50 - 100 kHz Transmit/Receive Offset: 39 MHz (Transmit offset: Switch set to 'Master' = +20 MHz; Switch set to 'Slave' = -19 MHz of Thumbwheel Frequency setting). Modulation Choice: Voice, switch selectable on front panel. Modulation Input/Output: Headset w/10-foot cable, terminated in a 3.5 mm Plug (Mic & Earpiece). Headset Microphone Input: 3.5 mm front panel jack (tip connector) w/5 VDC thru a 2.2k resistor. Receiver Specifications: Receiver Sensitivity: -100 dBm nom./1.8 - 2.5 GHz; -95 dBm nom./3.5 - 6.6 GHz; -90 dBm nom./7.5 - 12.0 GHz; -85 dBm nom./18.1 - 23.5 GHz. Receiver Bandwidth: ~= 100 kHz, nominal. Receiver Overload Point: -30 dBm (signals <30 dB path loss will read 30 dB on meter). Receiver Damage Level: +10 dBm. Readout Resolution: 0.1 dB. External Readout: External readout of path loss with DVM (0-2 VDC), BNC connector, rear panel. Variable Alignment Tone: 600 Hz to 6 kHz, varies with signal strength, switch selectable. Internal Speaker Output: 350 mW max., variable, behind front panel. Earpiece Output: 250 mW max., variable, 3.5 mm front panel jack (ring connector). Speaker/Earpiece Control: Audio Volume, variable pot. Display Specifications: Receiver Display: 4-digit backlit LCD direct path loss in dB (equivalent to signal input level in dBm). 0.5" high digits with decimal point and low battery indicator. Display Resolution: 0.1 dB. Display Update Time: 300 ms. Low Battery Indicator: Annunciator within LCD display, on when battery has approx. 15 min. left. LED Status Indicators: BAND 1 / 1.8 - 2.5 GHz, BAND 2 / 3.5 - 5.0 & 5.8 - 6.6 GHz, BAND 3 / 7.5 - 10.0 & 11-12 GHz, BAND 4 / 18.1 - 19.4 @ 22.0 - 23.5 GHz. Internal Frequency Standard (TCXO) Specifications: Frequency: 10 MHz Aging Rate/Second: < or = to ±1 part in 10-10 / √τ (root Allen variance). Aging Rate/Day: < or = to ±5.1 parts in 10-9. Aging Rate/Year: < or = to ±7.6 parts in 10-7 after 45 days. Warm Up Stability: < or = to ±4 parts in 10-7 in 5 minutes (ref. freq. @ 1 hour). Retrace: < or = to ±3 parts in 10-7 after 24 hrs. ON, 24 hrs. OFF, 1 hr. ON (ref. to previous ON freq.). Temperature Stability: < or = to ±1 part in 10-6 (0°C to 50°C). Calibration Schedule: One (1) year. Headset Information: Earpiece: Dynamic, 8-ohms (ring connector). Microphone: Electret, noise cancelling (tip connector). Cord: Coiled, 10-foot length with right-angle 3.5 mm (1/8 in.) plug. Battery Characteristics: Operating Time (Approx.): 4 to 5 hours continuous @ 25°C (77°F). Low Battery indicator, within LCD display, ON when approx. 15 min. operating time remains. Charge Time (Approx.): 3 hours Manufacturer: Panasonic Manufacturer Part Number: LCS-2312NC, Rechargeable Sealed Lead/Acid Battery. Nominal Voltage: 12 VDC. Nominal Capacity: 2.3 Ah. Capacity Affected by Temperature: 40°C (104°F): 102% 25°C (77°F): 100% 0°C (32°F): 85% -15°C (5°F): 65% Self-Discharge @ 25°C: Capacity After 3 Month Storage: 90% Capacity After 6 Month Storage: 80% Capacity After 12 Month Storage: 60% Mechanical Specifications: Power: DC, self-contained 12 VDC, 2.3 Ah, Rechargeable Sealed Lead/Acid Battery. Weight: 3.2 kg (7 ls.) per unit (including Battery and Weather-resistant Instrument Back-pack). Dimensions: 89 mm x 213 mm x 333 mm (3.5" x 8.375" x 13.1"). Connectors: RF In/Out: Super SMA female sparkplug, field replaceable. Headset In/Out: 3.5 mm (1/8") front panel jack (earpiece = ring conn.; mic = tip conn.). Remote Readout: BNC rearpanel connector (0-2 VDC Out; 1 mV = 0.1 dB). Battery Charger In: 5.5 mm x 2.1 mm rearpanel Power jack (15 VDC/1 A, center pin positive). Environmental Specifications: Compliance: Designed to meet EN 61010-1 (IEC 1010-1) Operating Temperature: -10°C to 40°C (14°F to 104°F). Storage Temperature: -40°C to 71°C (-40°F to 160°F). Relative Humidity: 95% ±5% 10°C to 30°C; 75% ±5% to 40°C; 45% ±5% above 40°C. Burn In: Failure-free burn in of no less than 100 hours at 40°C. Pollution Degree: 1 (no pollution) (EN 61010-1/3.7). Transient Overvoltage: Installation Category II (EN 61010-1/J). Supplemental Specifications: Montreal Protocol: Nil Return. ISO 9000: XL Microwave's Quality System for design and manufacture is registered and certified by TÜV Essen to ISO 9001-1994. CE (European Union): EN 55011:1998 w/A1:1999, Group 1 Class B (emissions), EN 61326-1:1997 w/A1:1998 (immunity). Battery Charger: AC Mains Input: 90 to 264 VAC / 47 to 63 Hz. AC Mains Connector: IEC-320, 3-conductor. Conforms to IEC 320-3: 1987 (EN 60 320). DC Output: 15 VDC / 1 A. DC Connector: 5.5 mm x 2.1 mm Barrel Power connector, 5-foot cord. Dimensions: 33 mm x 51 mm x 86 mm (1.3" x 2.0" x 3.4") Operating Temperature: 0°C to 40°C (32°F to 104°F). Record-R Specifications: Data Recorded: Each record contains: Model No., Serial No., Date, Time (UTC), Longitude, Latitude, Frequency, & Path Loss. Data Record Time: ~= to 20 milliseconds Data Format: CSV (comma-separated variable). Max. No. of Records: 250 (stored in instrument's non-volatile memory). Downloading Records: Records are downloaded, thru RS-232-C or USB 'B' rear panel connectors. Download Baud Rate: 9600 Baud. Software: Log View-R Data Log Utility Software for Windows 95/98 operating systems. This software allows a remote computer to download, display, and save data records and clear the instrument's memory. GPS Specifications: Frequency: L1 (1575.42 MHz), C/A code (SPS), 8-channel cont. tracking, 32 correlators. Position Accuracy: ±2 meters CEP (50%) Timing Accuracy: ±95 nano-seconds. Position Fix Update: 1 second. Time to Lock: Cold Start: < 130 seconds (90%) Warm Start: < 45 seconds (90%) Hot Start < 20 seconds (90%) Reacquisition Time: < 2 seconds (90%) after loss of signal. Mechanical Specifications: RS-232-C Connector: DB-9 female (rear panel) USB Connector: USB type B female (rear panel). For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a $75.00 minimum for packaging, handling, and order processing. International shipping to be determined by destination. Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.: (1) Are you the end-user of this item? (2) If you are not the ultimate end-user of the item, please state the ultimate end user's name. (3) What is the ultimate country destination? 07/11/24

Price: 12499.99 USD

Location: Phoenix, Arizona

End Time: 2024-11-11T21:34:55.000Z

Shipping Cost: N/A USD