Wireless Remote Control Vibration Security Alarm Motorcycle Car Bike Anti-thief

Description: Bullet Points:Description: The thief slams the door and window outside the door, and the door and window vibrate immediately to alarm, to prevent the thief from entering the door to report the alarm, which is safer! Features: 1. This product does not need external power supply and is easy to use. 2. Using 9V laminated battery power supply, low power consumption, remote control distance within 20 meters, with the remote control for arming and disarming. This product remote control with battery, host 9V battery must be customer-owned (not including 9V battery). 3. Especially suitable for electric vehicles, motorcycles, cars, anti-theft alarm; can also be used for doors and windows, safes, walls, file cabinets, electric retracting doors, rolling doors, machinery and equipment, open-air stacking, etc.; indoor and outdoor open air It can be used. Once there is vibration, touch, and movement, it will emit a 120dB high-pitched alarm sound, which will achieve a deterrent effect such as timely alarm. 4. Remote control vibration alarm is mainly used to detect the occasion of vibration, can scare off the thief or remind the owner to pay attention to the movement of the person. 5. The installation is simple: the magnet can be attached to steel, iron articles, can also be used to stick, paste, hang, bundle and other fixed methods. Used on motorcycles, electric vehicles are all available, alarms are placed in the trunk of the car, or fixed in the car, open the switch, 3 seconds after the remote control is pressed, someone will send an alarm of 120DB or so to remind the car The owner scared the thief! Technical Parameters: Working voltage: DC 9V (9V alkaline battery, please use this machine if you do not have a battery) Anti-theft setting: Press the arming button, then enter the anti-theft alarm state after 3 seconds, the vibration is triggered, and the alarm sounds automatically to the armed state after 4-8 times of cycling, then vibrate again, then alarm. Anti-theft release: Press the disarm button to release. Simple installation: Self-contained magnet can be attached to steel and iron articles, and can also be fixed by sticking, sticking, hanging, and binding. Pay attention to the vibration frequency when the factory has been set, and the sensitivity cannot be adjusted! Therefore, the sensitivity is not a quality problem! Technical Parameters: Working voltage: DC 9V (9V alkaline battery,) Alarm sound pressure: 120dB Induction mode: vibration alarm Installation method: back magnetic type, self-adhesive paste, suspension Product size: about 100 × 53 × 28mm/3.94*2.09*1.10in Packing size: about 105×60×42mm/4.13*2.36*1.65in Alarm sound: 105 decibels Instructions: 1. Remove the battery board and discriminate the positive and negative polarity of the battery. Place the 9V laminated battery and move it into the battery cover. 2. Anti-theft settings: press the arming button, then enter the anti-theft alarm state after 3 seconds, the vibration triggers, the alarm sound cycle 4-8 times. 3. Anti-theft release: Press the disarm button to release. 4. When the alarm is subjected to vibration, shock, and movement, it will emit an alarm sound of 120 decibels, and the alarm time is about 20 seconds. 5. When the alarm sound is obviously reduced, please replace the battery. If it is not used for a long time, please remove the battery. 6. Anti-false alarm design. The sensitivity is adjustable at 10 levels, which can be suitable for doors and windows in most environments. The first time it was shaken, it only sounded for 2 seconds. After 2 seconds, it was shocked for 30 seconds again within 12 seconds. In case of accidental vibration in the environment, it would cause a false alarm and only stopped for 2 seconds. Scope of use: doors, windows in a wide range of places such as homes, shops, factories, warehouses, etc. Notes: If you are purchasing an omnidirectional vibration alarm with remote control, add the following two functions based on the above functions: This product does not require an external power supply and is easy to use. Powered by 9V laminated battery, low power consumption, one battery can be used for three months, remote control distance is less than 20 meters, use the remote control to switch the host. Instructions for Use: Installed on the door or on the window. Once someone knocks or slams the window, the alarm only needs to be slightly shaken, and immediately emits a loud alarm sound to scare off the thief or remind the owner. Packing List: 1*Alarm 1*Remote control 1*Manual

Price: 12.71 USD

Location: Dayton, New Jersey

End Time: 2025-02-02T21:36:39.000Z

Shipping Cost: 0 USD