Description: Automatic float valve water level control valve Working pressure range: 0.2-10KG (0.1-1MPa) Applicable medium: clean water Applicable medium temperature: ≤120℃ High temperature medium temperature: 10℃~120℃ Type: Vertical internal installation Material: nylon rubber Outlet diameter: 1/2 3/4 1 inch BSP thread Size: For detailed pictures, please see the picture on the left Color: as shown in the picture Working principle: When the surface of the water tower or the pool falls, the float in the valve chamber sinks. Use the orifice rod to open the pilot hole of the control valve. Lift up, press the joystick to close the pilot hole, the valve cavity begins to fill with water, and then close the control valve. The sealing surface of the control valve immediately stops water supply. Package content: 1 water level control valve × 1 stainless steel filter × 1 raw material belt × 1 outlet connector Only the above packaging content does not include other products. Note: The product is a liquid level control valve. After installation, the float must be vertical. If you need to install from the top, you need an elbow to connect the float valve and the inlet line. First, fix the water inlet pipe on a horizontal surface, and then connect the automatic water level control valve to the water inlet according to the standard. The main water inlet should be aligned with the normal diameter of the control valve. When in use, the shut-off valve should be fully opened. If two valves are installed in the same tank, they should be kept at the same height. Before installation, please clean the impurities in the pipeline to prevent blockage. If the water quality is not good, the valve needs to be properly maintained. If the user finds that the time for adding water becomes longer, he can upload the water inlet and rinse [WATER LEVEL CONTROL FLOAT VALVE]- When you install the water tank float valve in the water tank and adjust it to the water level you need, it can run accurately. The float valve has a filter at the water inlet, which can isolate most impurities and make the water out cleaner (please remove the water leveler float valve kit regularly to clean the filter to avoid clogging). [POND FLOAT VALVE HAS AN INGENIOUS DESIGN]- The water level float valve has an ingenious design and multiple improvements, so that the automatic water level ball valve can control the water level you want without using electricity. At the same time, the 1/2 float valve is suitable for most water pipes, so don't worry about the problem that the connection port cannot be installed. [ADVANTAGES OF FLOAT VALVE]-this valve replaces the traditional float valve, no electricity, easy to use, long life, low failure rate, saving water. [EASY TO INSTALL]-small size, estimated flow rate up to 40 psi 3 gallons per minute, 60 psi 5 gallons per minute.applicable medium temperature ≤120℃. [WIDELY USED IN]-water tanks, water towers, swimming pools, solar energy, toilets, hot water boilers, animal drinking water, air cooling, humidifiers, civil buildings, cooling towers, hot water boilers, steamers, water tanks, water towers, toilets.
Price: 23.45 USD
Location: Brentwood, New York
End Time: 2024-10-16T08:22:59.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Xuee
Type: Does not apply
EAN: 0086291712228
Package Dimensions LxWxH: 3.9x3.31x2.44 Inches
ISBN: 0086291712228
Size: 1/2" Side
Color: 1/2" Side
Weight: 0.33 Pounds
