Vintage 9” Rubber 2-Part Casting Jewelry Mold Angel With Basket Figure Figurine

Description: SCROLL BELOW THE DESCRIPTION TO SEE PHOTOS OF SOME OF THE ITEMS WE CREATED REPURPOSING THESE MOLDS, Original Vintage Roughly 9” Diameter Round 2-Part Vulcanized Rubber Spin Casting Mold, Angel With Basket Figure Figurine, For Decorative Purposes, But Originally Designed For Centrifugal Rubber Mold Casting (CRMC) Primarily Using Pewter, Zinc, Tin, And Lead Alloys (But Also Wax, Resin, Thermoset Plastic), And More, Great Vintage Industrial Lot Ready For Creative Repurposing: Unique Gifts, Wall Art, Under A Glass Tabletop, Clocks, Lamp Bases, Bookend Designs, Clay Impressions, Plaster Of Paris, Relief Plaque, Or Paint It To Make It Into A Custom Piece Ready For Hanging, Get Creative! Zoom In Or Click On Pictures And Please Read Our Detailed Item Description And Terms Below, Please View Or Search Our Other Items Here Including More Items From Our Giant Collection Of Vintage Spin Casting Molds, We Have Literally Thousands More Molds To Process So Check Back Often, Save On Shipping This listing is for an original vintage roughly 9” diameter round 2-part vulcanized rubber spin casting mold, one of thousands of vintage molds we are or will be selling. Be sure to read below the physical description for additional important information regarding our molds. In summary though, please note that our molds are offered for decorative, design, and personal artistic purposes; they were originally designed for centrifugal rubber mold spin casting but are untested and their viability for casting is unknown; some or all of our molds may or may not contain all of the components needed to complete an individual piece so please study the photos carefully; no intellectual property rights transfer upon sale of any mold and, if it is determined that a mold is suitable for casting, it is the new owner’s responsibility to determine usage limitations; these have only been superficially cleaned and should not come into contact with food, nor should they be handled by children until thoroughly cleaned as we believe these have been stored in an industrial setting since the mid-1990s; and finally, regardless of any particular mold’s usability for spin casting, its future life is up to you. Do you mount it as wall décor as is? Or is it an empty canvas to you? Or maybe a component of an industrial design you have in mind? To hopefully help provide you with some inspiration, scroll down below the description to see embedded photos of some of the items we created by repurposing these molds. All of our spin molds are vintage and the bulk of our collection dates back to the period from the mid to late 1970s into the 1980s. We are unsure how far back the early end of the time range goes, though there are certainly molds that appear to be of even earlier styles as well. This mold contains what we believe to be an angel with basket figure figurine. The angel measures roughly 1 1/2” in height. There are 12 cavities in total. Please note that these molds typically measure roughly 9” in diameter and weigh roughly 3 lbs. However, this mold may vary slightly in diameter and weight. The mold has a notch cut out of its side that allows the two parts of the mold to be easily aligned. The rubber seems to still be pliable. All of our molds are used and may have some or all of the following: pen and/or marker type writings, aging, wear, scratches, nicks, cracks, gouges, bending and/or warping, manufacturing imperfections, dirty and/or stained areas, dust, remnants of material used in the casting process, cast items that may or may not be complete or intact, missing locators, locators that may not line up properly, and rust-type marks and/or staining from the locators. This original vintage round rubber spin casting mold is sure to be a nice addition to your collection. We do our best to provide accurate descriptions, but please take a close look at the pictures to assess an item and its condition (mouse over to zoom, click to enlarge). This is one of many original vintage rubber spin casting molds we currently have listed, among other vintage or antique items. View or search our other items here. To elaborate on the summary we offered above, please note that our molds are being offered for decorative, design, and personal artistic purposes. While these molds were originally designed for centrifugal rubber mold casting (CRMC) using varied materials for the casting of many different items, our molds have not been tested for that purpose. We are therefore unable to offer any information regarding any mold's usability for actual spin casting. In that regard, please note that some or all of our molds may or may not contain all of the components needed to complete an individual piece so please study the photos carefully. For instance, earrings may need backings, a pendant may require a chain, a ring may need a gemstone, etc. Further, no intellectual property rights transfer to the new owner upon the sale of any mold. It is the responsibility of new owners to determine what can or cannot be done with them or the cast items that might be made with them. Generally though, if a mold is found to be suitable for casting, personal use creating cast items that are not intended for sale using any of our molds would not be a copyright or intellectual property issue. We only superficially clean the molds and, given they are of vintage nature and were used in an industrial setting, we do not know what metals or materials they may have come into contact with over their history. With that in mind, we do not recommend allowing food to come into contact with them or allowing children to handle them unless they are thoroughly cleaned. These unique spin molds are perfect for industrial décor. They are wonderful symbols of industry and artistry, marrying production efficiency with aesthetic handicraft. They can be displayed as-is or repurposed in a number of cool and creative ways. Convert your wall art into a stylish clock or bookends. Place them under the glass top of a custom end table or coffee table. Use one as the base of a lamp. Cover a wall with them. They make great media for creative spirits. Treat one as an empty canvas. Or paint it to make a custom relief plaque ready for hanging. Channel Brunelleschi and add perspective. Or make impressions out of clay or plaster of Paris. Get your creative juices flowing and start experimenting! As previously noted, the last photo included in this listing is a montage of our early results from our initial repurposing efforts. Spend a few minutes browsing through our items to see if you might find something for yourself or a unique gift for someone else. Our hope is that that little taste will inspire you to shop for hours and to visit us often to see our latest additions. If you have any questions, please contact us prior to purchasing. Buyer pays all shipping costs. Combine purchases to save on shipping. If you buy more than one item, BEFORE PAYING please let us know that you are done shopping so that we can send you a combined invoice with an updated discounted shipping price (or just give us a bit of time to repackage your items and we’ll send a new invoice). We use the United States Postal Service for all of our shipping. Local pickup can be arranged. As you can see in our listings, we offer a wide range of items and seem to find many objects of interest. We never know where or when we'll find our next treasure. Check back in with us frequently. Buy with confidence. We always do our best to satisfy our customers and work hard to offer excellent service. We encourage you to contact us if you have any problems with our products or services. In the unlikely case your item arrives damaged, please be sure to retain any and all packing material as we may need it to resolve a potential insurance claim. Your feedback is very important to us, and we welcome any comments or suggestions you might have to help us improve our service.#832 Spin Mold

Price: 14.95 USD

Location: Sutton, Massachusetts

End Time: 2024-12-30T02:41:14.000Z

Shipping Cost: 12.2 USD