Victron Phoenix Inverter 12/800 - 120V - VE.Direct GFCI Duplex Outlet

Description: Phoenix Inverter 12/800 - 120V - VE.Direct GFCI Duplex Outlet - 650W Inverters allow users to power domestic equipment - requiring 230V/120V AC - using 'leisure' or 'automotive' batteries rated at 12V, 24V or 48V DC. *This inverter has a GFCI Duplex Outlet. E.Direct Communication Port The VE.Direct port can be connected to:A computer (VE.Direct to USB interface cable needed)Apple and Android smartphones, tablets, MacBook, and other devices(VE.Direct Bluetooth Smart dongle needed) Fully Configurable:Low battery voltage alarm trip and reset levelsLow battery voltage cut-off and restart levelsDynamic cut-off: load-dependent cut-off levelOutput voltage 210 - 245VFrequency 50 Hz or 60 HzECO mode on/off and ECO mode sense level Monitoring:In- and output voltage, % load, and alarms Proven Reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature. High Start-Up Power Needed to start loads such as power converters for LED lamps, halogen lamps, or electric tools. ECO Mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once on standby, the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote On/Off A remote on/off switch can be connected to a two-pole connector, or between battery plus and the left-hand contact of the two-pole connector. LED Diagnosis Please see the manual for a description. To Transfer the Load to Another AC Source: The Automatic Transfer Switch For Victron’s low-power inverters, they recommend the Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Inverter Specifications:Cont. Power at 25 degrees C: (1) 800VA Cont. Power at 25 degrees C / 40 degrees C: 650 / 560WPeak Power: 1500W Output AC Voltage / Frequency (adjustable): 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0,1%Input Voltage Range: 9,2 - 17 / 18,4 - 34,0 / 36,8 - 62,0VDC Low Shut Down (adjustable): 9,3 / 18,6 / 37,2VDynamic (load dependent) DC Low Shut Down (fully configurable): Dynamic cut-off, see https://www.victronenergy.com/live/ve.direct:phoenix-inverters-dynamic-cutoffDC Low Restart ; Alarm (adjustable): 10,9 / 21,8 / 43,6VBattery Charged Detect (adjustable): 14,0 / 28,0 / 56,0VMax. Efficiency: 90 / 90 / 91%Zero-Load Power: 6,5 / 7 / 9,5WDefault Zero-Load Power in ECO Mode (default retry interval: 1 / 1,5 / 3,0WECO Mode Stop ; Start Power Setting: AdjustableProtection (2): a - fOperating Temperature Range -40 to +65 degrees C (fan-assisted cooling) Enclosure Specifications:Material ; Color: Steel chassis and plastic cover (blue Ral 5012)Battery-Connection: Screw terminalsMaximum Cable Cross-Section: 25 / 10 / 10mm² / AWG4 / 8 / 8Standard AC Outlets: 230V: Schuko (CEE 7/4), IEC-320 (male plug included); UK (BS 1363), AU/NZ (AS/NZS 3112); 120V: Nema 5-15R, GFCIProtection Category: IP 21Weight: 5,5kg / 12lbsDimensions (H x W x D, mm): 105 x 230 x 325 Accessories:Remote On-off: YesAutomatic Transfer Switch: Filax Standards:Safety: EN-IEC 60335-1 / EN-IEC 62109-1 / UL 458 (3)EMC: EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3Automotive Directive ECE R10-4: 1) Nonlinear load, crest factor 3:1; 2) Protection key: a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) DC ripple too highPlease contact your dealer for any returns, repairs or support issues related to this product.

Price: 247.01 USD

Location: 8721

End Time: 2024-11-23T19:25:24.000Z

Shipping Cost: 0 USD