VECO BRAVE Control Line Stunt Model Short Kit 19-35 Engine with NEW Paper Plans

Description: Partial Short Kit and Plans of the VECO BRAVE Vintage Control Line Stunt Model Plane Resurrection of the Veco BRAVE Control Line sport combat model for .19 to .35 power in a partial kit form. This was the first plane my dad and I build together back in the 70's. It took me years to not only remember the plane but to find a good set of plans. I found a good set, now I recreated a great set. I purchased a set of plans and redrew each part in CAD and recreated a partial short kit a well as updated and cleaned up the PDF plans. Although it is an easy enough control line plane to build this kit is not recommended for the beginner. You should have a solid scratch build skill level and some model airplane fabrication experience. This kit includes only the 34 parts shown as cut in pictures and as listed below. The kit has only balsa wood and plywood laser cut parts. Each kit is cut as ordered and is considered a ‘custom product. The following are included in this kit16 Wing Ribs2 Center 1/4" Ribs (actually two 1/8” rib to be laminated each side) Left and Right side of Fuselage Balsa Doublers Balsa Formers 3 - 8 Plywood Formers 1 and 2Plywood Bell-crank platformStabilizer & ElevatorsRudder and FinSet of recently updated printed plansBuild Info Sheet (note, this is only a copy of an original build sheet)36 Laser Cut Balsa and Plywood Parts in All Also included is a supplemental sheet that shows additional ribs used to widen the area at the fuselage for covering after wing is installed. Some of the original kits used 1/2" blocks to make the center ribs... you can simply use the template on the supplemental sheet to cut four 1/8" ribs and sandwich them together on the outside of each center rib. That is what I did after I built the wing... will be much easier doing this during initial wing construction. Additional items that may be needed NOT included in the kit but not limited to sheet balsa (for fuselage sides), additional balsa pieces like leading and trailing edge, balsa sticks and stringers, engine mount hardwood, wire and wheels for landing gear, bell-crank, horns, rods, covering, paint, etc.. My plane in the picture is for illustration only and is NOT included. I've also included some build photos of same plane. Please do NOT expect for more than what is shown in pictures with regard to the laser cut wood parts. Also note that the picture of the original build instructions is not included. I only have the picture and not the actual supplemental sheet. Please ask any questions before purchasing. Wish to save some money? Opt for digital plans and have them printed locally. Saves you $20.00 and I’ll include them on a thumb drive. See my other listing with digital plans.

Price: 99 USD

Location: Visalia, California

End Time: 2023-11-20T20:42:28.000Z

Shipping Cost: 14 USD