Description: VC97A Auto range digital multimeter T-RMS back light with test leads TLP20180 Features: 1. True RMS measurement, NCV function, MAX/MIN data hold, Backlight display(but only for VC97A); 2. Relative value measurement, Frequency/duty cycle, Data hold; 3. Auto power off and Beeper alarm function; 4. Full protection function, Anti-high voltage circuit design; 5. Strong functions in Antimagnetic and Anti-interference 6. Unit symbol display and easy reading. Technical data: True RMS:√ NCV Function:√ Diode/hFE measurement:√ Backlight display:√ Duty cycle measurement:√ Continuity alarm:Less than 50Ω±10Ω Low battery indication:Less than approx 2.4 V Data Hold:MAX，MIN，HOLD Auto Power Off:About 15 minutes later Function Protection:√ Input Impedance:10MΩ Sampling Rate:3 times/seconds AC Frequency Response:40-400Hz Operation method:Auto Range Max display:4000 LCD Size:65x41mm Power supply:2×1.5AAA (not INCLUDED) Power consumption:Quiescent current approx 2mA Basic Function:Basic FunctionRangeAccuracyDC Voltage400mV/4V/40V/400V/1000V±(0.5%+5)AC Voltage400mV/4V/40V/400V/750V±(0.8%+10)DCA400uA/4000uA/40mA/400mA/4A/20A±(1.0%+5)ACA400uA/4000uA/40mA/400mA/4A/20A±(1.5%+10)Resistance400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ±(0.8%+2)Capacitance40nF/400nF/4uF/40uF/400uF/4mF/40mF±(2.5%+5)Frequency10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/30MHz±(0.5%+4)Temperature-40℃～1000℃（0F～1832℉）±(1.0%+5) General characteristic Color Body: dark grey, holster: orange Weight 520g (including all accesory) Meter size 185×93×35mm Standard accessory Test probes, CLIP, manual, TP01 temperature probe Aidetek 3pcs test leads set 0.7mm and 1mm soft and hard needle tip 4 tiny parts multimeter TLP201801) A pair of needle tip thin and sharp test leadsMax voltage: 30VAC, MAX 1A, Ф 0.7mm (0.027”) tip width, needle length: 21mm (0.8”)They are used for the drilling of the insulation of wires to allow for automotive electrical measurements without causing damage to the wires. Can be used as a pin probe of the rush to work with small circuit boards.2) New sharp and hard stainless steel needle test leads 4 DMM multimeter CE CATII 600V MAX. 1A 4mm socket A820155These needle tipped multimeter probes are great for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Not only can these make a good replacement for any multimeter probes you have now that are damaged or worn, but thanks to the needle tip, these probes are great for testing your SMD components!Product：Test Probe Application scope：Match with the test lead of Multimeter or Oscilloscope Advantage： Lengthened sharp and hard stainless steel needle(Dia.1mm) can easily pierce the surface of cable but doesn't destroy it.It can be widely used about the non-destructive cable test in auto,Telecom,Industry or test inside of the plug. Available color：Red Black Metal material：Brass、Stainless Steel Insulator material：PA Rated voltage/current：CE CATII 600V /MAX. 1A Connect method：4mm socket connectionApplication scope：Match with the test lead of Multimeter or OscilloscopeProduct features：Lengthened sharp and hard stainless steel needle(Dia.1mm) can easily pierce the surface of cable but doesn't destroy it. It can be widely used about the non-destructive cable test in auto,Telecom,Industry or test inside of the plug.Whole Length: 129.5mmNeedle length: 20.5mm3） A pair of PVC lead extensions, Shrouded banana plugs at both ends Whole length: 53cm (21 “) Package: 1 x vc97A multimeter 1 x pair test probe;1 x pair test CLIP;1 x temperature probe;1 x manual;1 set of TLP20180
Price: 49.75 USD
Location: CA
End Time: 2025-01-23T08:29:21.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
MPN: Does Not Apply
Electrical Equipment Type: Electrical Meters
Brand: AIdeTek
