【USA】Water Flow Sensor Switch 8/10/12mm HT-30 Protect for CO2 Laser Engraver

Description: Technical Parameter Product model:HT-30 Medium pressure:<0.6Mpa Medium temperature: < : 70° AC/DC:0-11 OV Current:0.2A Thread: G 3/4''-3/4''Lift:3.2mFlow:3000L/HApplication: for 40w/60w/80w laser tube. 1. Features: The water switch is specially used for laser equipment, and the water protection internal switch is mobile, so the utility model has no abrasion and stable performance. Water protection, including all the joints of brass, to avoid the iron copper joints, easy to rust shortcomings. 2.Role: Check the flow of water in the pipeline and the size of the flow (flow). When the water flows through, the internal switch is closed, and a laser signal is communicated to the laser power supply or the control card, so that the laser tube is normally out of light. 3.Use: (1). water inlet and outlet joints are tightened: all are put into O type sealing ring. Then tighten the inlet and outlet connections. (2). in and out water pipe connection: follow the direction of the arrow to connect the water inlet pipe and the outlet pipe. The answer is not working. (3). you can cut the ends of the wire end, and connect to the laser power supply or control card. Water flow switch used to protect laser tube. when the water pump not working, water sensor will detective, and shut down laser machine. So laser tube will not be broken.It can be used together with a water pump, instead of chiller.

Price: 23.4 USD

Location: New Jersey

End Time: 2024-12-26T07:34:41.000Z

Shipping Cost: 0 USD