USA Gel di incisione in porcellana dentale 9,5% Etcant di acido idrofluorico

Description: Descriptions: 37% Phosphoric Acid Etching Syringe Gel 5ml Features: Dentex etching gel is a polymer thickened gel for use on enamel and dentin.This gel will effectively treat enamel and dentin, producing the necessary microretentive surface for successful bonding. The polymer thickener creates thixotropic properties, enhancing handling characteristics. The etchant rinse away cleanly and quickly, leaving no residue.Packages: Refill: 5 ml/syringe, Instruction X1Indications: Treat dentin and enamel, Treating agent on dental restorative material.1. Isolate tooth and then prepare the cavity in a conservative manner. clean the entire surface with a slurry of pumice and water.2. Apply etchant using a tip, a disposable syringe tip, or disposable brush tip. allow etchant to remain in palce for 15 seconds. etching time should be monitored with a stopwatch. begin timing at the end of application.Option: place etchant enamel first, then proceed to cover dentin, for a slightly longer enamel etching time.3. Rinse thoroughly (at least 5 seconds) to completely remover all traces of etchant.4. Remove exces moisture from the tooth and proceed with the application of etching gel, waiting for 10 seconds, then rise thoroughly. then apply adhesive. 9.5% Porcelain Etch Description: 9.5% Porcelain Etch is an Etchant to make porcelain surface treatment.It is used on ceramic based crown,veneer,inlay and onlay.It can roughen the surface of porcelain and enhance the bonding strength. Packages: 2.5 ml/syringe 3X Disposable Tips Instruction Warning: Protective measures must be taken by patient,operator and assistant. Don’t use this product until you have thoroughly read and understood the instruction. New 37% Phosphoric Acid Etching Syringe Gel 5ml Dental Etchant Gel 37% Phosphoric Acid Etching Silica Gel 5ml FEATURE：1.Enamel and dentin etching.2.Apply special technology to obtain ideal density of the gel.3.Gel in blue color for better visual management.Indication: It is used for acid etching of tooth enamel and dentin before dental repair.Operation Procedure：1. Remove surface dirt, rinse the prepared cavities, and blow dry.2. Apply the etching agent from the tooth enamel to the entire surface of the repair, and etch for 20-40 seconds. The acid etching time of deciduous teeth and dental fluorosis can be extended appropriately according to the actual situation.3. Rinse with clean water after acid etching, and suck out in time.4. Use adhesives and resins for bonding repair. FDA for Resin: 510(K)Number: K180463, Regulation Number: 872.3690, Product Code: EBF This product expires on 05/2025 or better.

Price: 7.3 USD

Location: Fullerton, California

End Time: 2024-08-21T07:51:47.000Z

Shipping Cost: 0 USD