Description: Product DescriptionPackage include1 x Upgraded GRBL 1.1 Control Board1 x USB cable1 x GRBL Offline Hand Controller with SD cardGRBL 1.1 Control Board DescriptionConnection:USB (USB-CH340)Input voltage:24VDC (only support 24VDC input)Control software:GRBL control (candle), UniversalGcodeSenderMaster chip:atmel 328P (arduino nano)Spindle drive chip:MOSFET recommendation 24V DC, current : within 10ASupport stepper motor:Support 12V, maximum current of 2A or less,recommended within 1.5A and additional heat. (any nema17/nema23 stepper motor)Support system:Windows XP / Win 7 / Win 8 / Win 10 (32/64 can be). Linux;Power Interface:5.5-2.5mm DC interfaceAdvantages of Upgraded Version1.Add the outer casing: protect control board in transit,to avoid short circuit problem during use;2.Add the power button switch;3.Cancel the drive module,use integrated imported stepper motor drive,with short circuit protection,and integrated heat dissipation aluminum alloy;4.Add the fan port to force heat dissipation;5.Add offline recognition,can insert offline modules and computers at the same time.Offline will automatically identify if there is computer control.6.Enhanced spindle drive,can support 20000rpm spindle.support more powerful spindle.7.Improved USB interface: The original USB interface is patch soldering, transport collision and improper use, easy to drop, now changed to plug-in, very strong;8.The spindle drive increases the optocoupler isolation, which makes the control board generate less heat, and the spindle speed adjustment is more linear and safer.9.Add emergency stop button port,probe port and XYZ limit port.Advantages of 3 Axis CNC GRBL Offline Controller1.Support SD card and TF card at the same time, standard capacity 1G.2.With this offline controller module, you can directly control the CNC router without connecting it to your computer.3.After inserting the file into the SD card,the engraving file can be directly identified. You can also use the micro USB cable to connect the offline hand controller board to your computer and save the file directly.4.Easy to use: All you have to do is connect the offline module to the GRBL controller board, which you can use it to control the CNC rounter.5.Manually control: manually adjust X,Y,Z axis location as engraving starting point,manually open or close spindle,manully open or close cooling fan6.File engraving: after off-line controller save file, it can connect the GRBL control board and process engraving,no need to connect PC computer7.Save file: after the off-line controller connect PC,it will be recognized as USB,large capacity storage device, can access engraving file directly.8.SD shows it is SD card condition,turn on power supply after insert SD card,otherwise,it won't work.SD card capacity 4G could be recognized.Press Z+ and Z- , the Z axis will move up and down.Press X+ and X- , the X axis will move left and right.Press Y+ and Y- , the Y axis will move Front and Back.Press SPIN : Spindle on (Laser on ), Spindle off (laser off)Press SMOD: returnPress Z+ for 5 seconds , change the Language to English.Press X- or X+ button to switchControl：Press confirmation button to access manually controlling pageFile：Press confirmation button to access file pageSet：Press confirmation button to access setting pageOn the off-line controller, buttons control corresponding actions.SPN is spindle controlling,should press SPIN.Fan is fan controlling, should press SMOD.Common supported formats include nc. tex. tap.Press [Y+] [Y-] to select filePress [Ok] to EnterPress [Ok] to begin if you are readyNote:Long press [Exit] to stop machiningX± Y± Z±: Moving AxisOK/Spindle: Spindle ON/OFFExit/Step: Change Step/Exit (long press)How to increase the spindle power: After pressing the spindle button, press and hold the OK button and the Z+ button simultaneously to increase the speed.How to decrease the spindle: After pressing the spindle button, press and hold the OK button and the Z- button simultaneously to decrease the speed.1.Main PageCtrl: Machine Control;File: Use the Gcode file;Press [Y+] [Y-] to select; Press[Ok] to Enter2.Control PageX± Y± Z±: Moving AxisOK/Spindle: Spindle ON/OFFExit/Step: Change Step/Exit (long press)How to increase the spindle power: After pressing the spindle button, press and hold the OK button and the Z+ button simultaneously to increase the speed.How to decrease the spindle: After pressing the spindle button, press and hold the OK button and the Z- button simultaneously to decrease the speed.3.File PageCommon supported formats include nc. tex. tap.Press [Y+] [Y-] to select filePress [Ok] to EnterPress [Ok] to begin if you are readyNote:Long press [Exit] to stop machiningShipping Please open the package and check if there are some damages before sign, if there are some damages , please do not sign and contact us immediately Items will be shipped within 1-2 days upon the receipt of payment.Problem&Feedback Please give us the opportunity to resolve any problem when you have, we concern your problem and we will try our best to resolve it. We are a new member in ebay now, and need understand both of sides Pls email us before you want to leave any negative feedbackRefund When you have the parcel, and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping costContact us Welcome worldwide customer inquire and questions, we will try to do our best to feedback customer’s email within 1-2 business days,if not pls check the mail box again Customer’s satisfaction is very important to us.
Price: 44 USD
Location: MoeoValley,Califoia
End Time: 2024-10-12T01:30:11.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Input voltage: 24VDC (only support 24VDC input)
Newly added functional ports: Add emergency stop button port,probe port,XYZ limit port and add
Control software: GRBL control (candle), UniversalGcodeSender
Connection: USB (USB-CH340)
MPN: Does Not Apply
Spindle PWM speed: Support
Support system: Windows XP / Win 7 / Win 8 / Win 10 (32/64 can be). Linux
Brand: YIDOFENG
Support stepper motor: maximum current of 2A or less,is recommended within 1.5A and addi
Master chip: atmel 328P (arduino nano)
Spindle drive chip: MOSFET recommendation 24V DC, current : within 10A
Application: Mainly suitable for GRBL engraving machines such as 3018,3018 pro
