Description: Upgraded Watt Power Meter Plug Home Electrical Usage Monitor 1 Pack, White Product Details Brand: MECHEER Power Source: Corded Electric Style: Digital Color: White Min. Operating Voltage: 12 Volts Measurement Type: Ammeter Maximum Operating Voltage: 120 Volts Manufacturer: MECHEER Part Number: PM01-US Item Weight: 7.7 ounces Package Dimensions: 6.54 x 3.35 x 3.03 inches Item model number: PM01-US Size: 1 Pack Item Package Quantity: 1 Batteries Included?: No Batteries Required?: No Brand: MECHEER Power Source: Corded Electric Style: Digital Color: White Min. Operating Voltage: 12 Volts Various Monitoring Parameters: The power meter plug can monitor the power (W), energy (kWh), volts, amps, hertz, power factor, cost, minimum and maximum power (W), cumulative days and time of your appliances. By switching 7 display modes, you can easily know the various parameters while the appliance is working. The home energy monitor can also calculate and display how much power your appliance uses and how much electricity bill it cost in cumulative time. Upgraded LCD display: With large screen size 2.36 inch x 1.85 inch, clearer monitor backlit, our electrical usage monitor can display the data clearer and more visible no matter day or night. 180°full wide viewing angles is great for reading and recording the data in any angles. No need to stand on the front of the display and bend over to read the numbers. Adjustable Backlight Time: Our upgraded watt meter has 5 options of backlight time. The default backlight time duration is 10 minutes(bL-0). If you want to change the backlight time, you can press and hold "UP" and "DOWN" button at the same time to enter backlight time setting, then press "UP" and "DOWN" to select the backlight time (bL-0 =10 minutes, bL-1=1 hour, bL-2=4 hours, bL-3=8 hours, bL-4=always on), finally press the "COST" to save the backlight time settings. Overload protection: When the power of the appliance exceeds the overload power, the LCD will display “OVERLOAD” to warn the user. All the buttons will quit working and can only be workable when you lower or remove the load power. The default overload power is 3680W and is adjustable from 0 to 3680W. In general, you need to set the overload power to 1800W before using. Just press the "function" button for more than 3 seconds to enter the setting. Data Memory Function: The wattage meter will record your power consumption data when you remove it from socket, or remove appliances from the electricity monitor. You can directly see the last data when you use it next time. This function can also automatically save the data when there is a sudden power failure. Monitor Your Energy Usage：Our watt meter power analyzer lets you track electricity consumption and manage power usage to help save on bills. It works as a voltage, kilowatt, current, and electricity meter. If you have any questions about your meter socket, feel free to contact us. WARNING！！！ 1. DO NOT use in wet environment. 2. DO NOT connect the power meter to a multi-plug outlet to measure multiple electrical appliances at the same time, in case the total power exceeds the threshold of 1800W and cause a short circuit. NOTICE: The consumption and time will NOT be measured and counted when: your device is in standby or not working;the rated power of your device is smaller than 0.5 watt, but energy consumption is always measured since the device was plugged in. What data will be saved? Electricity quantity, cost, electricity p rice, cumulative time. (But NOT save current, voltage, power, power factors)You can access to Mode 7 directly by pressing the button “COST”.Press any buttons to wake up the backlight after it automatically turns off (Backlight time is adjustable).If there is an abnormal display or no response, please reset the electric meter by pressing the RESET button. WHEN POWER SWITCHED OFF AND BACK ON, IF THE POWER METER TURNS "0", IT MAY BECAUSE THE TESTING TIME IS LESS THAN 1 HOUR, OR TOTAL KWH LESS THAN 0.1 KWH. THAT'S WHY NO DATA SAVED. The power of electrical appliances can not exceed TO RESET: If you only want to clear the cumulative data (Electricity quantity, cumulative cost, cumulative time) and keep the electricity p rice setting, just press button "FUNCTION" and "UP" at the same time over 3 seconds to quickly clear the you want to reset all the settings, you can press the reset button with the reset tool. Don't use a needle because it may cause the button to get stuck in the device. HOW TO SET THE BACKLIGHT TIME: Press and hold "UP" and "DOWN" button at the same time to enter backlight time setting. Now "bL-0" is displayed on the LCD and flashes for 10 seconds.Press "UP" and "DOWN" to select the backlight time. (bL-0 =10 minutes, bL-1=1 hour, bL-2=4 hours, bL-3=8 hours, bL-4=always on).Press the "COST" to save the backlight time you don't want the backlight on, press the "DOWN" button to turn off the backlight can also press any button to turn on the backlight again.
Price: 24.99 USD
Location: Clifton, New Jersey
End Time: 2024-12-22T18:21:45.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Mounting Style: Does not apply
Plug Type: Does not apply
Box Shape: Does not apply
Type: Does not apply
Maximum Amperage: Does not apply
Suitable For: Does not apply
Material: Does not apply
Current Type: Does not apply
Application: Does not apply
Smart Home Compatibility: Does not apply
Finish: Does not apply
Smart Home Protocol: Does not apply
Voltage: Does not apply
Features: Does not apply
Current Rating: Does not apply
Model: Does not apply
Number of Outlets: Does not apply
Number of Poles: Does not apply
Number of Gangs: Does not apply
Number of Phases: Does not apply
Number of Spaces: Does not apply
Item Height: Does not apply
Brand: MECHEER
MPN: Does not apply
