Universal Garage Door Remote Control, 433.9 MHz, With Four Old Key Channels

Description: Universal Garage Door Remote Control, 433.9 MHz, With Four Old Key Channels Features: Note 1: This model can clone 433MHz remote control, it does not support code or megacode. Please know the working frequency of your old/original remote control before you to avoid disappointment. High precision and copy efficiency, copy your existing remote control to loss. Note: Please attention to the following important points before ordering. 1. Press and hold the top two keys of the new remote control at the same time, until the indicator light flashes, then release any one key. 1. Left hand original remote control, right hand new remote control, try to lean together. Four ABCD buttons can copy four different types of chips, i.e. one remote control can operate four different types of facilities. If you press for a long time without flashing, it means that the keys are not pressed at the same time, please the above steps. This universal remote control is compatible with 433 MHz (433.92 MHz) frequency,variable code system or IC mode. HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F630. Before purchasing, check your original remote control or garage door system to see if it is 433 MHz. SMC918, AX5026, SMC926, AX5326-3, AX5326-4, HT600, HT680, HT6207. The second step "remote control to copy (clear the code and then operate) for 433MHz, the transmission distance is 50-100m (open), which brings you a new remote control experience and many conveniences for your daily life. Features Note: Remote control chip compatible with the following, other chip type will not work, before ordering, please check your original chip type. 3. Press any key of the remote control after clearing the code, the indicator light does not light up Note! The original remote control do not carry out this clean code operation. 2262 (such as PT2262, SC2262, HS2262, HX2262, etc.). The first step "new remote control clear code 3. Wait for the indicator light to flash and then release it, which means that the hold is successful. HCS101, HCS200\HCS201 (some of them, not all), HCS300\HCS301 (some of them not all). 1 X universal remote controls. Compatible chips: 2260 (such as PT2260, SC2260, LX2260, HX2260, etc.). Note 2: Door remote control has chip type requirement. It works with compatible chips as shown in the list description; please check if your original remote control chip type is in the compatible range before purchase. 2. Release the Jian and then press 3 times in a , the indicator light is flashing that clear code successfully. 2. Press and hold the new remote control open button first, then press the old remote control corresponding key to hold. PT2264, PT2240 (LX2240), CS5211, 1527 (EV1527, HX1527). Product Description: This universal remote control is compatible with 433 MHz (433.92 MHz) frequency,variable code system or IC mode. 1 X universal remote controls. 3. Wait for the indicator light to flash and then release it, which means that the hold is successful. 1. Press and hold the top two keys of the new remote control at the same time, until the indicator light flashes, then release any one key. Note 2: Door remote control has chip type requirement. It works with compatible chips as shown in the list description; please check if your original remote control chip type is in the compatible range before purchase. The first step "new remote control clear code Compatible chips: 2260 (such as PT2260, SC2260, LX2260, HX2260, etc.). 2262 (such as PT2262, SC2262, HS2262, HX2262, etc.). 2. Press and hold the new remote control open button first, then press the old remote control corresponding key to hold. HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F630. SMC918, AX5026, SMC926, AX5326-3, AX5326-4, HT600, HT680, HT6207. HCS101, HCS200\HCS201 (some of them, not all), HCS300\HCS301 (some of them not all). PT2264, PT2240 (LX2240), CS5211, 1527 (EV1527, HX1527). 1. Left hand original remote control, right hand new remote control, try to lean together. Features Note: Remote control chip compatible with the following, other chip type will not work, before ordering, please check your original chip type. The second step "remote control to copy (clear the code and then operate) Four ABCD buttons can copy four different types of chips, i.e. one remote control can operate four different types of facilities. High precision and copy efficiency, copy your existing remote control to loss. Note: Please attention to the following important points before ordering. Before purchasing, check your original remote control or garage door system to see if it is 433 MHz. Note 1: This model can clone 433MHz remote control, it does not support code or megacode. Please know the working frequency of your old/original remote control before you to avoid disappointment. for 433MHz, the transmission distance is 50-100m (open), which brings you a new remote control experience and many conveniences for your daily life. If you press for a long time without flashing, it means that the keys are not pressed at the same time, please the above steps. 2. Release the Jian and then press 3 times in a , the indicator light is flashing that clear code successfully. 3. Press any key of the remote control after clearing the code, the indicator light does not light up Note! The original remote control do not carry out this clean code operation. 3. Wait for the indicator light to flash and then release it, which means that the hold is successful. SMC918, AX5026, SMC926, AX5326-3, AX5326-4, HT600, HT680, HT6207. 2. Release the Jian and then press 3 times in a , the indicator light is flashing that clear code successfully. 3. Press any key of the remote control after clearing the code, the indicator light does not light up Note! The original remote control do not carry out this clean code operation. The second step "remote control to copy (clear the code and then operate) HCS101, HCS200\HCS201 (some of them, not all), HCS300\HCS301 (some of them not all). for 433MHz, the transmission distance is 50-100m (open), which brings you a new remote control experience and many conveniences for your daily life. Four ABCD buttons can copy four different types of chips, i.e. one remote control can operate four different types of facilities. If you press for a long time without flashing, it means that the keys are not pressed at the same time, please the above steps. Before purchasing, check your original remote control or garage door system to see if it is 433 MHz. 2262 (such as PT2262, SC2262, HS2262, HX2262, etc.). PT2264, PT2240 (LX2240), CS5211, 1527 (EV1527, HX1527). 1 X universal remote controls. This universal remote control is compatible with 433 MHz (433.92 MHz) frequency,variable code system or IC mode. High precision and copy efficiency, copy your existing remote control to loss. Note: Please attention to the following important points before ordering. Note: Remote control chip compatible with the following, other chip type will not work, before ordering, please check your original chip type. 2. Press and hold the new remote control open button first, then press the old remote control corresponding key to hold. Features Compatible chips: 2260 (such as PT2260, SC2260, LX2260, HX2260, etc.). The first step "new remote control clear code 1. Left hand original remote control, right hand new remote control, try to lean together. Note 1: This model can clone 433MHz remote control, it does not support code or megacode. Please know the working frequency of your old/original remote control before you to avoid disappointment. 1. Press and hold the top two keys of the new remote control at the same time, until the indicator light flashes, then release any one key. Note 2: Door remote control has chip type requirement. It works with compatible chips as shown in the list description; please check if your original remote control chip type is in the compatible range before purchase. HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F630. Note: Remote control chip compatible with the following, other chip type will not work, before ordering, please check your original chip type. SMC918, AX5026, SMC926, AX5326-3, AX5326-4, HT600, HT680, HT6207. Features 1. Press and hold the top two keys of the new remote control at the same time, until the indicator light flashes, then release any one key. HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F630. for 433MHz, the transmission distance is 50-100m (open), which brings you a new remote control experience and many conveniences for your daily life. If you press for a long time without flashing, it means that the keys are not pressed at the same time, please the above steps. Four ABCD buttons can copy four different types of chips, i.e. one remote control can operate four different types of facilities. Before purchasing, check your original remote control or garage door system to see if it is 433 MHz. 3. Press any key of the remote control after clearing the code, the indicator light does not light up Note! The original remote control do not carry out this clean code operation. Note 2: Door remote control has chip type requirement. It works with compatible chips as shown in the list description; please check if your original remote control chip type is in the compatible range before purchase. HCS101, HCS200\HCS201 (some of them, not all), HCS300\HCS301 (some of them not all). 2. Release the Jian and then press 3 times in a , the indicator light is flashing that clear code successfully. 1 X universal remote controls. 2262 (such as PT2262, SC2262, HS2262, HX2262, etc.). Note 1: This model can clone 433MHz remote control, it does not support code or megacode. Please know the working frequency of your old/original remote control before you to avoid disappointment. 3. Wait for the indicator light to flash and then release it, which means that the hold is successful. The first step "new remote control clear code 1. Left hand original remote control, right hand new remote control, try to lean together. Compatible chips: 2260 (such as PT2260, SC2260, LX2260, HX2260, etc.). This universal remote control is compatible with 433 MHz (433.92 MHz) frequency,variable code system or IC mode. High precision and copy efficiency, copy your existing remote control to loss. Note: Please attention to the following important points before ordering. PT2264, PT2240 (LX2240), CS5211, 1527 (EV1527, HX1527). The second step "remote control to copy (clear the code and then operate) 2. Press and hold the new remote control open button first, then press the old remote control corresponding key to hold. PT2264, PT2240 (LX2240), CS5211, 1527 (EV1527, HX1527). 3. Wait for the indicator light to flash and then release it, which means that the hold is successful. 2. Press and hold the new remote control open button first, then press the old remote control corresponding key to hold. Note 2: Door remote control has chip type requirement. It works with compatible chips as shown in the list description; please check if your original remote control chip type is in the compatible range before purchase. Note 1: This model can clone 433MHz remote control, it does not support code or megacode. Please know the working frequency of your old/original remote control before you to avoid disappointment. The second step "remote control to copy (clear the code and then operate) 1. Left hand original remote control, right hand new remote control, try to lean together. 2. Release the Jian and then press 3 times in a , the indicator light is flashing that clear code successfully. Four ABCD buttons can copy four different types of chips, i.e. one remote control can operate four different types of facilities. for 433MHz, the transmission distance is 50-100m (open), which brings you a new remote control experience and many conveniences for your daily life. HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F630. 1 X universal remote controls. This universal remote control is compatible with 433 MHz (433.92 MHz) frequency,variable code system or IC mode. Before purchasing, check your original remote control or garage door system to see if it is 433 MHz. 3. Press any key of the remote control after clearing the code, the indicator light does not light up Note! The original remote control do not carry out this clean code operation. High precision and copy efficiency, copy your existing remote control to loss. Note: Please attention to the following important points before ordering. SMC918, AX5026, SMC926, AX5326-3, AX5326-4, HT600, HT680, HT6207. Features 2262 (such as PT2262, SC2262, HS2262, HX2262, etc.). HCS101, HCS200\HCS201 (some of them, not all), HCS300\HCS301 (some of them not all). Compatible chips: 2260 (such as PT2260, SC2260, LX2260, HX2260, etc.). 1. Press and hold the top two keys of the new remote control at the same time, until the indicator light flashes, then release any one key. Note: Remote control chip compatible with the following, other chip type will not work, before ordering, please check your original chip type. If you press for a long time without flashing, it means that the keys are not pressed at the same time, please the above steps. The first step "new remote control clear code 2. Release the Jian and then press 3 times in a , the indicator light is flashing that clear code successfully. 1. Left hand original remote control, right hand new remote control, try to lean together. 2262 (such as PT2262, SC2262, HS2262, HX2262, etc.). 3. Wait for the indicator light to flash and then release it, which means that the hold is successful. Features Before purchasing, check your original remote control or garage door system to see if it is 433 MHz. Note 1: This model can clone 433MHz remote control, it does not support code or megacode. Please know the working frequency of your old/original remote control before you to avoid disappointment. Compatible chips: 2260 (such as PT2260, SC2260, LX2260, HX2260, etc.). HCS101, HCS200\HCS201 (some of them, not all), HCS300\HCS301 (some of them not all). This universal remote control is compatible with 433 MHz (433.92 MHz) frequency,variable code system or IC mode. PT2264, PT2240 (LX2240), CS5211, 1527 (EV1527, HX1527). 3. Press any key of the remote control after clearing the code, the indicator light does not light up Note! The original remote control do not carry out this clean code operation. Note: Remote control chip compatible with the following, other chip type will not work, before ordering, please check your original chip type. 1 X universal remote controls. for 433MHz, the transmission distance is 50-100m (open), which brings you a new remote control experience and many conveniences for your daily life. If you press for a long time without flashing, it means that the keys are not pressed at the same time, please the above steps. HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F630. 2. Press and hold the new remote control open button first, then press the old remote control corresponding key to hold. Note 2: Door remote control has chip type requirement. It works with compatible chips as shown in the list description; please check if your original remote control chip type is in the compatible range before purchase. High precision and copy efficiency, copy your existing remote control to loss. Note: Please attention to the following important points before ordering. 1. Press and hold the top two keys of the new remote control at the same time, until the indicator light flashes, then release any one key. The first step "new remote control clear code Four ABCD buttons can copy four different types of chips, i.e. one remote control can operate four different types of facilities. SMC918, AX5026, SMC926, AX5326-3, AX5326-4, HT600, HT680, HT6207. The second step "remote control to copy (clear the code and then operate)

Price: 5.37 USD

Location: Shenzhen

End Time: 2024-03-06T21:10:26.000Z

Shipping Cost: 0 USD