Uniball Drag Link Flip Kit For 2-5" Lift Kit Jeep Wrangler JK 2007-2018

Description: Brand New Drag Link Flip Kit For 2-5" Lift Kit Description The new drag link directly replaces the factory link and uses the factory adjusting collar and tie rod end at the pitman arm. This installation requires drilling out the steering arm tapered hole in the passenger's side knuckle and installing a precision machined tapered insert. We even included a 7/8" step bit to make this process easy and not require the purchase of an expensive drill bit to complete the install. The new insert has a knurled outer surface and has a slight interference fit making it extremely strong and eliminates any possibility of play or loosening. The insert can also be reused in the opposite position if the Jeep ever needed to be returned to the original steering setup. The drag link flip flattens out the steering angles when combined with the lift heights of 2" and above providing better performing, more solid steering feel over the factory setup. To properly compliment the new steering angles provided by the drag link flip, a front track bar bracket is supplied. The new bracket mounts to the factory track bar axle mount. It not only adapts the factory mount for proper track bar angles, it also strengthens the factory setup by tying into the axle via a u-bolt setup integrated into the design. The new track bar location mimics the drag link angle perfectly and eliminates bump steer. Package Content Uniball Drag Link Flip Bar x1 Track Bar Bracket x1 7/8" Step Drill Bit x1 Necessary Bolts x1 Digital Installation Guide x1 Installation time is approximately 1-2 hours Tire Fitment Requires 17" diameter wheel or larger, with 4.75" backspacing or less Compatible Vehicles Jeep Wrangler 2007-2018 JK Warranty Lifetime Warranty against any material or workmanship defect, please contact us first if there is an issue Lifting Guide Determine your lift kit requirements based off current stock heights (displayed in green) for both front and rear by measuring from the ground to the bottom of your vehicle's flare. Level to StockLevel to your stock rear measurements by adding appropriate lift to the front of your vehicle.Stock LiftingAdd to both front and rear equally to gain lift while retaining the stock appearance.Leveling LiftAchieve a leveled lift by adding to both front and rear while accounting for the stock difference. Service Guarantee We offer Same day handling on all orders paid before 2pm Pacific Standard Time. Free Priority 1-5 Day shipping. All items purchased hold a 60 day satisfaction guarantee or your money back. Free Return if for any reason you are not satisfy with the item. Please Be Advised Delivery will use supplied address - any changes made may result in a delay in shipment. Vehicle fitment is in accordance with American models; international models may differ and affect proper fitment requirements. Buy MUST contact seller before ordering with any fitment questions. Requests for fitment checks made in order notes will not be satisfied. Also Available Front Lift Kit Rear Lift Kit Track Bar Drop Bracket 2" Front 2.5" Front 3" Front 1.5" Rear 2" Rear 2.5" Rear For Front For Rear Shock Extender Sway Bar End Link Sway Bar Drop For Front For Rear For Front For Rear Recommanded For 2-4" Lift Steering Stablizer Relocation Skid Plate Class III Tow Hitch Recommanded For 2-4" Lift For Front For Rear 2" Hitch Brake Line Relocation Control Arm Drop Bump Stop For Front For Rear Recommanded For 3-4" Lift For Front For Rear Combo Front & Rear 2" Lift 2.5" Lift 3" Lift

Price: 169.99 USD

Location: Chino, California

End Time: 2025-01-15T00:47:58.000Z

Shipping Cost: 0 USD