Description: Ultimate RCBS Rockchucker Case Ejector And Primer Mod Kit! This is the ultimate package to reloading for an RCBS Rockchucker press! This kit will replace the existing primer catch (original is horrible anyway), have an external primer primer chute with tray that mounts to the front of the press. If you deprive plenty, I use a box of projectiles to hold it against the press so I’m not unbolting it constantly to empty it. Attachment of the primer chute friction fits to the press easily. Along with the new depriming parts, it will include a case ejection system with built in chute. As pictured, the chute goes on the left and is hand tight to allow it to articulate however high you need it to go. On the right side is the ejection arm, which I’ve bolted to the lowest open hole to allow the most arc. This is held with tension using a rubber band, which so far has held up very well and keeps constant tension on the ejection arm. The whole setup simply goes over the ramrod and is held in place with small magnets on the underside. I try to center the ejection arm over the shell holder so it doesn’t try to walk off the ramrod. Make sure the shell holder is positioned so that the shells will leave the ramrod at the 9oclock position. Please note: you will need to have the ramrod up approximately 1/3 of its total travel to clear the ejector. I can barely clear a 308Win without touching the ejector, anything shorter is good to go. This is concerning a decap step, not a loading step. For loading, I can do a 223Rem without issue, but anything longer will require you to push the ejector out and hold it in place until the ejector is set back. With all that said, I can run pistol cartridges quickly and easily. This set will include: -Primer catch -Primer chute -Ejector -Shell ejection chute -Base that houses ejection chute and ejection arm -8 magnets sized 6mmx2mm for the base -2x bolt/nut attachment for all pieces of base -1x rubber band **Press not included, design made around the RCIV press. All parts will be printed in black, silver used to show contrast of parts as a prototype.
Price: 24.99 USD
Location: Huntington, West Virginia
End Time: 2025-01-31T06:08:35.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: RCBS
Type: Complete RCBS Rockchucker Modification Kit
Ammunition Type: Handgun / Rifle
Model: RCBS Rock Chucker Supreme
MPN: Does Not Apply
California Prop 65 Warning: N/A
Press Type: Single Stage
