TV LOGIC LCD MONITOR - LVM-173W-3G

Description: Used monitor that works well. There are 3 dead pixels that you can see in the photos. It doesn't come with a mount of stand because I was using this c-stand or desktop arm so the price reflects that. I have upgraded to another monitor so I'm letting this one go. I can bring up bars on it if you request since I will be still using it for interviews on-set. Let me know if you have any other questions. SPECS: The LVM-173W is a multi-format broadcast monitor, featuring a 17-inch (diagonal) LCD with a resolution of 1366x768 pixels. It weighs in at about 15.5 pounds, and is some 3.5 inches thick—inside a plastic case. Itcomes mounted on a secure, pivoting metal stand for desktop use, and has a convenient carrying handle on top and mounting points on the back. The LVM-173W uses a high-quality 12-bit video processing architecture that yields superior scaling and deinterlacing for image critical monitoring. The wide range of inputs on the monitor includes HDMI (standard- and high-definition), DVI-I (RGB), analog (three BNC's that can carry composite, S-video, or component signals), and two SDI ports, which can carry 4:4:4 dual link HD-SDI (optionally), HD and SD SDI, and 2K. It is comfortable with all commonly used frame rates (23.98, 24, 25, 29.97, 30, progressive, interlaced, and psf), and PAL and NTSC standards. Both analog and digital inputs have looping outputs. Audio inputs are provided for embedded digital (the de-embedder is built-in, not an optional extra) or mini-plug analog; outputs are a headphone jack (mini-plug) and tiny internal stereo speakers. Product Highlights• 17” 1366 x 768 (16:9) Resolution• Matte Finish Panel• Supports TVLogic Color Calibration Utility for propercolor alignment• Firmware update by using Ethernet or USB• GPI (RJ45)• Waveform/Vectorscope (Y/Cb/Cr, RGB, Wide Type, LineWaveform)• Range Error• Marker• User Aspect• Blue Only / Mono• X3 Zoom(PBP)• Key lock• Selectable 3 function keys• H/V Delay• Timecode Display• UMD support (ANC, Manual, Dynamic & User)• Closed Caption: CEA-608/708 (SDI), OP-42, OP-47, Line 21, ANC• Monitor control by using RS422/Ethernet• Focus Assist 3G-SDI Level A/BSupports 3G-SDI Level A/B input.Audio Level Meter DisplayDisplays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.Blue Only / MonoRed and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the color tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.Closed captionClosed caption.Focus AssistAssigns a color to the pixels on the boundaries of the image to inform the user to achieve the best focus. With this function, user can easily differentiate the focused area from out-focused area especially when shooting with a shallow depth of field.H/V DelayAllows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.Key LockKey Lock is a password-protection function of the OSD menu so that non-authorized users cannot change the setting of the monitor.MarkerDisplays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.PBP(Picture by Picture)Support displaying multiple inputs on the screen at the same time.Range ErrorAnalyzes the input signal’s Luma (Y’) and chroma (C’) information. If the input signal exceeds the designated minimum and maximum values, the pixel will blink. This function allows for the user to easily identify any issues with exposure.Time Code DisplayDisplays the Timecode information on the screen.UMDDisplays user customized 8 characters or source ID or Tally signal of Ancillary (ANC) data on the screen.User AspectAdjusts the Width /Height display ratio.Various Scan ModesControls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.Waveform/Vector ScopeWaveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.Vector Scope: Displays the color components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.ZoomMagnifies the input signal from 0% to 90%.

Price: 1000 USD

Location: Brooklyn, New York

End Time: 2024-09-01T17:20:08.000Z

Shipping Cost: 30 USD