Description: For faster lead times and better prices,please visit my site. Visit my ebay store for more information!!! TRX 250R CR250 Ignition HarnessThis Harness is made for use with 00-01 Honda CR250 ignition on your TRX250RThis harness will plug right into the 00-01 Honda CR250 CDI box and is made to fit the TRX250R. How it's done and what you will need.You will need the stator and CDI from a 200-2001 Honda CR250 Bike. About 17" from the CR stator the bike harness starts.You will need to cut it off here.Decide where you will mount your CDI.Use the length of wire you need from the supplied stator pigtail.When you make your splices, stagger them about half an inch from each other so there there isn't a big bulge in in the harness. It will look nicer and make it easier to get the wire into the supplied vinyl tubing.If you cut the stator back far enough you will see that there is a green wire and a green/white. both of these will connect to the green/white in the stator pigtail.Hook up your coil,CDI, Ground ring and your kill switch. You have the option to use 2. Connect to either black and black-white wire. Whats in the package:00-01 CR250R ignition harness for TRX250RStator pigtailKill switch terminals to make it plug and play
Price: 95 USD
Location: Cuero, Texas
End Time: 2024-02-16T07:34:13.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Manufacturer Part Number: Does Not Apply
Brand: South Texas Banshee
