Trigger Springs for Adventure Force / Dart Zone

Description: Replace your lost trigger spring or fine-tune the tactile feedback to your liking with this selection of replacement trigger springs. Works in most Adventure Force and Dart Zone blasters (DZ Max Dictator requires it to be cut down by 5mm). Available in different levels of stiffness. • Relaxed, which is slightly easier to pull than the stock spring. • Stock, which is pretty much an exact match for what was in there. • Stiff, which requires a bit more force than stock. • Very Stiff, which requires noticeably more force than stock. (Recommended for those who, like me, love a snappy trigger.) INCLUDES: 1x Trigger Spring. INSTALLATION: Simply put in place of whatever spring you are replacing. DISCLAIMER: All of my products are printed/tested with the utmost attention to detail. Despite this, I am NOT responsible for any damage incurred to you or your blasters through the use of any of these parts by themselves or in combination with others. It is up to you to keep yourself and your blasters in functioning condition. Some prints may have slight imperfections as is common to all 3D printing (especially for PETG). These slight imperfections will not interfere with mechanical function or integrity/strength. Powered by ExportYourStore.com

Price: 2.66 USD

Location: Huntsville, Alabama

End Time: 2024-07-31T00:17:52.000Z

Shipping Cost: N/A USD