Tool Kit For Jura Capresso Impressa AEG Cafamosa Krups Nespresso Coffee Machines

Description: This listing is for a driver and shop quality bits that will open all the special screws used in most Jura, Jura Capresso, Delonghi, Nespresso, Starbucks Verismo, Magimix, Franke, Siemens, Krups and AEG machines. The set consists of: The kit contains all the three Torx sizes that are commonly used in these machines. The Torx bit are hardened tool steel and made in Germany by Wiha. The stainless steel oval head bit will fit the proprietary oval head security screws in the following machines:Jura-Capresso: E5, E8, E9, E10, E25, E30, E40, E45, E50, E55, E60, E65, E70, E74, E75, E80, E85, ENA3, ENA4, ENA5, ENA7, ENA9, ENA Micro Easy, ENA Micro 1, ENA Micro5, ENA Micro 9, F5, F50, F60, F70, F90, F7, F8, F9, XF50, XF70, S50, S55, S70, S75, S85, S90, S95, S7, S8, S9, C5, C9, J5, J6, J9, Z5, Z6, Z7, Z9, X5, X7, X9, X30, X70, X90, X95, XS90, GIGA-Series,Ultra, Cappuccinatore, M30, Scala, Scala Vario, Evolution, 201, 300, 401, 500, 601, 801, 2000, 3000, 4000, 5000, 6000Capresso: C1000, C1300, C1500, C2000, C3000AEG Cafamosa: CF 80, CF 81, CF 85, CF 90, CF95, CF 100, CF 120, CF 200, CF 300, CF 400, CF 500Krups: Orchestro, Siciliana, Toscana, and all Nespresso machines. Please beware that the tool does not fit the 5.8x4.8mm oval head bolts found in Krups drip coffee makers! Franke: SaphiraStarbucks: Verismo Delonghi and other Nespresso makes not mentioned above: This bit fits the oval head screws in all Nespresso machines that use capsules. That said, beware that there are a few select Nespresso models that use Torx "security" screws with a pin in the center. This tool kit includes such bits. NOTE! If your Nespresso machine has star shaped screws with a tiny pin in the center you need a different tool. this is the right kit for you. The tool fits oval head bolts with a head size of approximately 3.9x3.3mm. It's worth noting that the head size varies slightly between espresso maker production batches and models. Because of this we deliberately manufacture our tool to have a very tight fit to the head in order to increase the chances that even the most rusted bolt can be opened without risking rounding the head of the bolt or damaging the tool, which can happen if the tool fits too loose on the head or in other words if it has too much play. In short, it will fit all Jura-machines and all Nespresso Machines that use Capsules (Pods). We don't know of any Jura machine that it does not fit. As for other brands, please check list above or contact us. Traditionally the screws are obvious and appear as black "rivets". However, on many of the more recent models Jura has hidden the screws which makes it less obvious how to disassemble the machines. You may find this additional info helpful: J-series, Z-series, and X5: There are two hidden security screws behind the Jura logo in the back. Turn the logo an eight of a turn clockwise (Z-series/X5) or counter-clockwise (J-series) to release it and you will find the screws. ENA-series: These machines are secured with a locking mechanism. There is a security screw behind the Jura logo in the back. Turn the logo to counter-clockwise release it and you will find the screw. Remove the screw and then push the gray plate upwards to release the locking mechanism in the back. Likewise, there's another oval head screw in the front that will be visible when you pull out the tray. The locking mechanism in the front needs to be pulled down (in contrast to the one in the rear that moves upwards). Note: The oval-head bit included with this driver is made from magnetic stainless steel, meaning it will stay firmly put in the driver and not fall out. (Most other stainless steel tools, including our original, are not magnetic and will simply not stay put in a magnetic driver. They require a bit driver with friction hold, which is not be easy to come by). One of the reviews below may lead you to believe that the bits included with this driver are magnetized. This is not the case. The bits are magnetic, but not magnetized. However, that said, the Wiha bit driver magnet is strong, so in practice there is some magnetism that indeed helps keep the screws in place as the reviewer say. 100% satisfaction guaranteed! If you're not happy we will refund your money! Shipping: In most cases your item will be shipped the same day if payment is received by noon eastern time (12 PM EST, 16:00 GMT Monday-Saturday). Items paid after this cutoff time may be shipped the next business day. International customers: Please note that the default shipping is by First Class Mail (Economy Mail). The US Postal Service does not guarantee timely delivery for this mail class, and although most shipments arrive within 7~14 days (14~21 to Italy), on some occasions it has taken up to 30 days for international First Class Mail shipments to reach their destination.

Price: 39.95 USD

Location: Cumming, Georgia

End Time: 2024-09-13T07:28:52.000Z

Shipping Cost: N/A USD