Tokai / LC228 BB Slim Neck BLK Les Paul Custom Type Electric Guitar

Description: Tokai / LC228 BB Slim Neck BLK Les Paul Custom Type Electric GuitarDescriptionMain Specifications[Maple top / Mahogany back / Ebony fingerboard]This specification reproduces the tone of a full-fledged Les Paul Custom! ! [3.8 degree neck joint]The neck joint is made with a 3.8 degree angle.This finish, which is only possible with a limited number of craftsmen at Tokai Gakki, achieves excellent sustain and high playability. [Change in body shape]Not only the top arch, which can be said to be the "face" of the Les Paul, but also the pickup position, which is the key to the sound, has been changed. In imitation of the original Les Paul, the rear pickup has been moved closer to the bridge than the conventional LS and LC, pursuing a contrast in sound with the front pickup. [High-precision neck joint processing]Experienced craftsmen handcraft the joint to maximize the adhesion density between the body and neck. [Hide glue (nikawa) adhesion]Hide glue (nikawa) is used not only for the neck joint but also for the fingerboard. It is not as hard as Titebond, and dramatically improves the vibration transmission of wood. [60's Thin Neck]The thin neck grip of the original 60's Les Paul was measured and the same taper was reproduced. [Handmade neck shape finish]After forming the rough neck shape with a router, a craftsman will give the final finishing by hand.Although there will be some individual differences, you can get a comfortable neck feeling. [Backpack style gig case]The included case is equipped with Tokai's original SG-3S, which has a thick cushion that holds the instrument firmly.The two-way pocket can store sheet music as well as small items such as shields.The two backpack style shoulder straps are highly cushioned and reduce the burden on the shoulders. BODY: Maple Top Mahogany Two Pieces Back NECK: Mahogany One Piece (1960 Original Burst Slim Shape) Set-Neck Head Angle 18° FINGERBOARD: Ebony RADIUS: 300R FRETS: 22F ♯213 SCALE: 625/312.5mm BRIDGE: LS-VB Bridge LS-VT Tailpiece NUT(width): Bone (43.0mm) INLAY: Block PICKUPS: PAF-Vintage MK2S×2 CONTROLS: 2V.,2T 3way Toggle SW JACKS: Switchcraft GigBag includedShippingShipping Method : FedEx (EMS in some countries) Usually The item will be dispatched within 3～5 business days after your payment is confirmed.We always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight companies are closed.About Importer's ObligationImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior. Thank you for your understanding.

Price: 1953 USD

Location: Chiba

End Time: 2024-11-15T06:25:41.000Z

Shipping Cost: 150 USD