Telos Z/IP ONE with AES IP Broadcast Codec 2001-00289

Description: Telos Z/IP ONE with AES IP Broadcast Codec. Telos part # 2001-00289Unit is in in very good condition. May have some scuffs and scrapes. Has been fully tested out by Telos and is running the most current version of software. Unit was from Telos B-Stock. Unit comes with power cord only. No other accessories included. No warranties expressed or implied. Z/IP ONE is a 1 RU rack-mount IP codec for remote broadcasting. It’s a single-space rack unit perfect for studios, TOCs and remote kits. Z/IP ONE Includes a full range of codecs including AAC-ELD, AAC-HE, AAC-LD, MPEG 4 AAC, MPEG 2 AAC, MPEG Layer 2, G.711, G.722 codecs, plus linear audio and optional aptX® Enhanced coding. Z/IP ONE supports SIP 2.0 protocol and conforms to N/ACIP standards; it also works with VoIP devices and connects to compatible SIP PBXs. A full complement of I/O, including Livewire® AoIP, analog and AES/EBU, is standard. Conformance and Compatibility: Conforms to N/ACIP (Open) Standards. Fully supports Session Initiation Protocol 2.0 (SIP) Compatible with TCP, UDP, DNS, Zephyr Xtream®, Uncompressed PCM, and other Internet Protocols. Codecs: SIP: G.711, G.722, MPEGLayer2, MPEGAAC, MPEG4AACLC, MPEG2AACLC, Linear PCM, MPEG AAC-Enhanced Low Delay (ELD), HighEfficiencyAAC. Connections: Analog 1x Stereo input, presented on two XLR-F connections 1x Stereo output, presented on two XLR-M connections Livewire 1x 100BASE-T connections, presented on RJ-45 AES/EBU 1x Stereo Input, presented on one XLR-F connection 1x Stereo Output, presented on one XLR-M connection Network 2x 100BASE-T connections, presented on RJ45 (1x LAN, 1x WAN) USB 2x A-Type, Female Parallel (GPIO) 1x DB25, Male Audio: Analog Line Inputs: Input Impedance: 6K Ohm differential Input Range: Selectable, Line (+4 dBu nominal), Microphone (-50dBu nominal) Selectable Phantom power Analog Line Outputs: Output Impedance: 50 Ohm differential Output Clipping: +22dBu Digital Audio Inputs And Outputs Reference Level: +4 dBu (-20 dB FSD) Impedance: 110 Ohm, balanced Signal Format: AES3 (AES/EBU) AES3 Input Compliance: 24-bit with sample rate conversion AES3 Output Compliance: 24-bit Digital Reference: Internal (network timebase) or external reference 48 kHz, +/- 2 ppm Internal Sampling Rate: 48 kHz Input Sample Rate: 32 kHz to 192 kHz Output Sample Rate: 48, 44.1 or 32 kHz, or “sync to input” (auto-matches rate and clock from AES/EBU input) A/D Conversions: 24-bit, Delta-Sigma, 256x oversampling D/A Conversions: 24-bit, Delta-Sigma, 256x oversampling Frequency Response Any input to any output: +/- 1dB 25– 20 kHz Headroom 18 dB Dynamic Range 87dB Unweighted 90 dB “A” Weighted Total Harmonic Distortion + Noise < 0.03% @ +12dBu, 1 kHz Sine Crosstalk Isolation > 80 dB Power Supply AC Input Auto-ranging supply, 90VAC to 240VAC, 50 Hz to 60 Hz, IEC receptacle, internal fuse Power consumption: 14.2 Watts Operating Temperatures 0-40 degrees C (32-104 degrees F), stirred air Dimensions 19” (48.3 cm) standard rack mounting front panel 1.75” (4.5 cm) height, 6.5” (16.51 cm) depth

Price: 900 USD

Location: North Royalton, Ohio

End Time: 2024-12-04T00:36:31.000Z

Shipping Cost: N/A USD