Description: 3/8 Inch Compression Angle Stop Valve Tee Adapter,3/8 Kitchen Under Sink Tap Y Fitting Water Faucet Tee,3/8 Plumbing Tee Toilet Feed Line Splitter,Tee Stop Valve,Side Being Female And Side Being Male So Acts Like A Perfect Splitter At Your Kitchen Or Bathroom Tap,Or Toilet,Or Washroom.You Can Make Tee Stop Valve Connections From Bathroom Sink To A Portable Washer,Bidet,Water Heater,Or Connections From Kitchen Sink Faucet Cold Or Hot Water Line To A Dishwasher,3/8 Inch Tubing Water Filter System, Second Faucet,Glass Washers.This Is Ideal Water Splitte. 3/8 Plumbing Tee,Toilet Feed Line Splitter. Use Tee You Can Add A Bidet To Toilet. 3/8 Kitchen Under Sink Tap Y Fitting Water Faucet Tee Toilet To Portable Washer Splitter. The Water Line Adapter Can Used On A Hot Water Line,And Can Use On A Cold Water Line. This Is A 3/8" Female Compression Port By 3/8" Male Compression And 3/8" Barb.3/8" Port Allows Connection Of Braided Tubing,Copper Tubing,Plastic Tubing.Water Line Adapter No Need To Use Teflon Tape ,The Angle Stop Adapter Valve Has O-Rings For A Leak Free Connection. The Water Line Adapter Female Housing Turn Independently From The Rest Of The Piece,So House Angle Stop Valves Are Very Close To The Wall, And Again, No Need To Worry About Clearance,Installing The Adapter Is Just As Easy. Note :Please Check The Size Carefully Before Ordering It.Connected Waterline Dimensions:(1)Copper Tubing Or Plastic Tubing Outer Diameter Must Be 9.1-9.5mm. (2) Compression Pex Tube,Braided Tube Internal Thread Diameter Must Be 13.17-13.23mm.(3)All The Internal Thread Diameter 13.17-13.23mm Compression Fittings Can Be Connected To The Tee Shut Off Valve Adapter. Installation StepsInstallation Steps 1.Turn Off The Cold Water Shut-Off Valve. 2.Turn On The Faucet To Release Any Pressure. Disconnect The Existing Faucet Connector Pipe. 3. Make Sure The O-Ring Is Seated Inside The Feed Water Adapter Female End Then Twist It Onto The Cold Water Supply Valve. 4.Twist The Existing Faucet Connector Onto The Male End Of The Feed Water Adapter. 5.Turn Off 3/8 Water Line Splitter Valve, Turn On The Cold Water Supply Valve,And Check For Leaks. 6. Connect The 3/8"Tubing To Water Diverter 3/8" Interface,And Check For Leaks. 7.End Of Installation. ✿ Lead Free Brass Chrome-Plated 3/8"X3/8"X 3/8" Inch Compression T Valve Adapter, Install On Angle Stop Valve,Adding An Outlet ,Supply Water To The Dishwasher,Glass Rinser,Water Heater,Portable Washer(Small Washer). ✿ Supply Line Add A Tee 3/8 X 3/8" X 3/8" Connector Is Great For Splitting Your Water Supply To Separate Pathways.For Example,This Will Allow You To Hook On Your Dishwasher Supply Line To Your Kitchen Sink Supply In Minutes ✿ 3/8 Splitter T Stop Valve Adapter, Tee With Valve , Made Of Piece All Metal 1/4 Turn Design.You Can Freely Control On-Off Of The Branch Waterway Adjust Water Flow Size.Potable And Non-Potable Water And Cold Hot Water Systems. ✿ 3/8 Water Tee Adapter,Female Housing Can Turn Independently From The Rest Of The Piece,So If House Angle Stop Adapter Valves Are Very Close To The Wall, And Again, No Need To Worry About Clearance,Easily Screwed Onto Existing Angle Stop Valve,3 Way Valve Built-In Rubber Ring , No Teflon For Installation. ✿ 3/8x3/8x3/8 Tee Valve - 3/8" Female Compression Inlet X 3/8” Male Compression Outlet X 3/8”Male Compression Outlet. Add On Tee Fitting,Only Spend You A Few Minutes To Install This Water Supply Spliter Tee Fittin
Price: 23.78 USD
Location: Chino, California
End Time: 2025-01-04T09:08:13.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Size: 3/8X3/8X3/8 Tee Stop Valve
EAN: 0792136659312
ISBN: 0792136659312
Package Dimensions LxWxH: 3.46x2.36x1.54 Inches
Weight: 0.26 Pounds
Type: Does not apply
Brand: Yeleah