Description: Wireless Remote adapter for Teac X-7, X-10, X-700, X-1000, X-1000M reel to reel decks and C-1, C-2, C-2X, C-3X and C-3RX cassette decks. Please be aware that I make each remote adapter custom when the order comes in. It could take up to about 10 business days before it ships. I've been making wireless remote adapters since 2006 with more than 3500 units shipped worldwide. I am an electrical engineer and started making unit for Nakamichi cassette decks for people on the NakTalk email list. Over the years my customers have asked me to make similar units for other models and brands of audio gear. I now make over 15 models of remote adapters for 11 different brands (Aiwa, Akai, Ampex, Crown, Nakamichi, Otari, Revox, Sony, Studer, Tandberg, Tascam, Teac and Technics). I typically sell through eBay, but, low volume models are only sold direct. If you don't see a remote adapter for your equipment ask me, I might have one already. Plug this adapter into the back of your Teac X-7, X-10, X-700, X-1000, X-1000M, C-1, C-2, C-2X, C-3X or C-3RX deck and be able to control it from across the room with any universal remote (preprogrammed universal remote is included). Up to four remote receivers can be used in the same area without interaction (by configuring internal jumpers for different remote codes). Power for the remote adapter is supplied by the deck. No AC adapter required. Each remote adapter is professional designed and built using a mix of surface mount and through hole components for years of reliable operation. In case there is a problem it is covered by a 1 year warranty. This unit plugs into the 12-pin WAKA remote connector on the back of the deck and will allow the deck to be controlled from any universal remote programmed for Sony VCR (VHS, Beta, 8mm or Laser Disc). Comes with a universal remote programmed to control the Teac wireless adapter. Frequently asked questions What functions can I control? You can control the following 7 functions: Play, Stop, Pause, Fast Forward, Rewind, Record and Record Mute. Can I control more than one deck? Up to four units can be located in the same area and controlled independently. Yes, there is a jumper inside for selecting Sony Beta VCR, VHS VCR, 8mm VCR and Laser Disc. Can I use my own remote? Yes, the wireless adapter responds to Sony VCR codes that are available on just about every universal remote I have ever tested. It is probably the most brand supported by universal remotes. Includes universal remote which I load with batteries and setup to work with the remote receiver so you can be up and running in minutes. Features: Small size. Only 2.6" x 2.6" x 1.1" Receive/Power LED is lit when the unit is getting power and it blinks off when a valid IR command is received Four unique device code settings allow four tape decks to operate in the same room without interaction (requires setting internal jumper) Works with your existing universal remote (just set it for Sony Beta, VHS, 8mm or Laser Disc) What's included in this auction. You get the IR remote receiver Universal remote preprogrammed to work with the remote receiver right out of the box. International Buyers – Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
Price: 79 USD
Location: Torrance, California
End Time: 2024-11-27T07:12:01.000Z
Shipping Cost: 8.55 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Unbranded/Generic
Type: Remote
Unit Type: Unit
Model: RC-90
Country/Region of Manufacture: United States
Unit Quantity: 1
