TAMA HH915D [Speed Cobra 910 Hi-Hat Stand] NEW

Description: NEWDescriptionCondition：NEWTAMA's SPEED COBRA hi-hat stand features the same long footboard as the SPEED COBRA 910 drum pedal, allowing a wider range of strokes for a more expressive hi-hat sound.The SPEED COBRA Hi-Hat Stand features the same long footboard as the SPEED COBRA 910 drum pedal and allows a wider range of strokes for a more expressive hi-hat sound. The lever glide system, which applies the principle of leverage, provides light stomping and speedy action. The drive unit is designed to be noiseless, and a strap is used for the drive unit. The spring seat is designed to increase the “sharpness” of the sound when closed, and the footboard angle and spring tension can be adjusted to suit the player's preference. In addition, the 2017 model is newly equipped with a quick-set hi-hat clutch that allows the cymbals to be attached and detached with a single touch. This is TAMA's high-end hi-end hi-hat stand that offers enhanced convenience in setup and transportation. High Hat StandsSPEED COBRAPipe diameter: 28.6mm-25.4mmLegs: Double legSpring tension: 6-level adjustmentWeight: 5.4KgHeight adjustment range: approx.720mm - 1,000mm (with standard rod)720mm-850mm (with short rod)Distance from the floor to the bottom of the cymbal when a cymbal is set. Quick-Set Hi-Hat Clutch (PAT.PENDING)This hi-hat clutch is compatible not only with TAMA's hi-hat rods (6mm) but also with hi-hat stands with rods up to 7mm.Simply by operating the button on the bottom part, the cymbal can be set/released on the clutch with a single touch. Also, by minimizing the ground contact area with the top cymbal, a more natural sound and sustain can be obtained when playing in the half open or open position. Spring SeatThe bottom seat was designed to increase the “sharpness” of the high hat close sound. By slightly tilting the bottom seat that supports the bottom cymbal, the air between the two cymbals is quickly released when the hi-hat is closed by pedal operation, producing a crisp sound. Lever GlideTAMA's original “Lever Glide” mechanism uses the principle of leverage to enable the pedal to be depressed with about half the force of a conventional pedal. In addition to significantly reducing the force required to depress the pedal, the lever glide also lengthens the stroke of the footplate, allowing for more subtle half-open sounds and sharper, tighter closures. 6-Way Tension AdjustmentBy rotating the adjustment dial, the spring tension can be adjusted in six different positions. The tension can be checked visually. The adjustment can be done with one hand, so it is easy to adjust the tension while sitting on the throne. Footboard Angle AdjustmentThe footboard angle adjustment function greatly affects the width of the footboard and sound variation. The footboard angle adjustment function allows for more natural setup of twin pedals. Tilt SystemThe tilt system allows the stand itself to be tilted by moving the fulcrum of the legs up and down. Spare-The-Rods Tension Rod ProtectorTAMA's unique storage function is used to insert the tension rod into the upper pipe and fix it with the hi-hat clutch. This prevents deformation of the rod and protects the hi-hat stand from problems during transportation. Duo-spikeThe Duo-spike can be switched between spike and rubber depending on the floor condition. Dual LegsDual-leg stand for smooth twin pedal setup. The two legs support the forward force exerted by stepping on the footboard, providing outstanding stability even on slippery floor surfaces. Non-Loosening Tension RodA rubber ring is attached to the bottom of the tension rod fixing nut. This prevents the tension rod from loosening during performance. Swivel FootA mechanism that allows the two feet to rotate freely independently of the direction of the footboard. This makes it much easier to set up the pedals when using twin pedals. Glide-Tite Grip JointThe nylon bushing joint method developed by TAMA in the 1970s was re-examined on a zero-based basis to achieve the natural sound of cymbals and drums. The result is the “Glide-Tite Grip Joint,” a joint structure that combines the metal-to-metal fixing method with the nylon bushing structure. By fixing the pipes and joints metal-to-metal, the stand becomes a solid and stable structure from the upper to the lower pipes. The effect is that cymbals and drums naturally “vibrate” on the more stable stand, preventing the vibrations generated by the instrument during play from escaping into the stand and maximizing the instrument's original potential.When sliding the pipes, the nylon bushings built into the joints contact the pipes to ensure smooth movement and prevent damage to the pipes. Hinge Guard BlockThe method of fixing the bearings at both ends of the hinge shaft has been changed from the conventional method of penetrating the shaft from the side of the footboard to a method in which the bearings are held between the top and bottom of the shaft. This method reduces the load on the hinge shaft itself by distributing the force applied to the bearings. The new hinge shaft can rotate with a higher degree of precision than the previous model, and achieves unprecedented smooth operability.Shipping We always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status. Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order. Shipping is available from Monday to Friday. Weekends are not available because freight companies are closed.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Price: 325.97 USD

Location: JP

End Time: 2024-11-25T09:57:17.000Z

Shipping Cost: 0 USD