System Three T-88 Epoxy Adhesive, 1 Quart Kit

Description: For well over 25 years T-88 has been the most widely used structural adhesive for marine and general woodworking use in the United States. Mixed at a 1:1 by volume ratio, our wood epoxy will cure at temperatures as low as 35ºF. When fully cured, it is unaffected by water, oil, kerosene, and many other chemicals. It will not stain wood and is immune to fungus and rot. This wood and marine epoxy is unique in that it may be applied to damp wood, provided it is worked well into the surface. T-88 is a high-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions. The adhesive may be used without modifications in normally fitted joints, and will cure in any thickness without shrinkage. T-88 is clear amber and becomes virtually invisible when varnished. This epoxy for wood exhibits outstanding adhesion and permanence on a wide variety of materials, and is endorsed by leading designers, builders and organizations. Premium Epoxy: T-88 is a high-performance structural 2-part epoxy adhesive; Our wood- and marine epoxy is endorsed by leading designers, builders and organizations Easy To Apply: Apply a liberal coat of T-88 clear epoxy resin to both surfaces; When clamping, avoid applying too much pressure, as this can starve the joint of glue, resulting in weak bond strength Versatile Application: T-88 is waterproof and it exhibits outstanding adhesion and performance on a wide variety of materials like metal, wood and composites Fast Curing: At 70°F, T-88 develops good properties within 16 hours and it cures to a clear amber appearance Tips And Tricks: When coating large areas with T-88, consider using a V-notch trowel for a uniform adhesive application

Price: 72.74 USD

Location: Brentwood, New York

End Time: 2024-12-17T08:41:27.000Z

Shipping Cost: 0 USD