Sunrise Telecom SunSet MTT Dual T1 Module SSxDSL-8 SSxDSL

Description: The Following Items Are Included: Sunrise Telecom Dual T1 Module SSxDSL-8 w/ Case (BC# 38104) BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! Sunrise Telecom SSxDSL-8 Dual T1 ModuleModule For Use With The SunSet MTT (Not Included In Sale) Working Condition: ExcellentCondition: RefurbishedWarranty: 90 Day Exchange Warranty SSxDSL-8 Dual T1 Module The SSxDSL-8 Dual T1 Module, part of the SunSet Modular Test Toolkit (MTT) family of products, is a rugged, battery-operated handheld test solution for comprehensive T1 testing. The MTT product family features the SunSet MTT as the industry’s premium handheld platform for access network service installation, verification, and troubleshooting applications. The Dual T1 Module, suited for everything from cable installation and maintenance to protocol monitoring, offers a full suite of tools for testing T1 circuits including pulse mask analysis, frequency and signal level measurement, error detection, alarm monitoring, voice frequency, and loopback control. Features Full duplex T1 testing - bidirectional monitoring Frequency and signal level measurement CSU and NIU emulation and loopback control HDSL span control Intelligent repeater control ESF facility data link Voice frequency monitoring Pulse mask analysis MF/DTMF/DP dialing and analysis ISDN PRI call setup and analysis GR-303 analysis SS7 protocol analysis Frame relay testing DDS testing Benefits Lightweight Flexible modular design Eliminates the need for multiple instruments Leverages existing MTT platform Cost-effective and future-proof Applications Accept a new T1 span (out-of-service testing) Monitor an in-service circuit (in-service testing) Loop a CSU or NIU on a T1 line Check frame slip and frame synchronization Measure a T1 signal level and pulse shape Talk and listen on a voice channel on a T1 line Fractional T1 testing Place/receive an ISDN call Troubleshoot an ISDN PRI problem with protocol trace monitoring and decoding Monitor the TMC/CSC control channel in a GR-303 system Bidirectional monitoring of SS7 signaling links Verify frame relay services over a T1 line Specifications ConnectorsDS1 L1 Tx/Rx: Bantam (f)DS1 L2 Tx/Rx: Bantam (f)Handset: RJ-9 (f) DS1 InterfaceFrame structure: ESF, SF-D4, SLC-96, UnframedLine code: AMI, B8ZSTransmitterClock: Internal, looped, externalReceiverFrequency range: 1542 to 1546 kHz Test RatesFull and Fractional T1 Test PatternsFixed and Pseudo random patterns Error Injection MeasurementsSimplex current measurements (in SSMTT-C, SSMTT-ACM+, SSMTT-ACM only)Signal measurementsAlarm statisticsError measurementsMeasurement recordFrequency measurementsEvent and Record printingView received data CSU and NIU Loopback Control HDSL Span Control Westell & Teltrend Looping Device Control ESF Facility Data LinkMonitor and send T1.403 PRM and BPM on FDLSupports automatic HDLC protocol handling. SLC-96 Data LinkSend and receive messageWP1, WP1B, NOTE formatsAlarms, switch-to-protect, far end loopTo TR-TSY-000008 specificationsSLC-96 FEND loop CSU and NIU EmulationBidirectionalResponds to loopback commandsGraphic indication of incoming signal statusSimultaneous display of T1 line measurementsAutomatic generation of AIS and Yellow alarmLoopbacks Voice Frequency CapabilitiesDrop and Insert DS0 audio testingVoice insert & monitoringVF tone generationVF level and frequency measurementsSignaling monitor VF Dialing and Analysis (SWxDSL-8VF)DialingMF/DTMF/DP dialing up to 32 digitsTrunk type: E&M, ground/loop start, FXO/FXSCall analysis ISDN PRI Call Setup and Monitor (SWxDSL-8PR)Bidirectional monitoring and call analysisNational ISDN-2, AT&T 5ESS, and Northern Telecom DMS-100 compatibleNT and TE emulationVoice and data call setup and receiveBuilt-in microphone and speaker for B-channel talk/listenSupports multirate Nx64k data callsBit error rate test with G.821 analysisUser programmable trace filter, view bidirectional real time message flow.Trace storage GR-303 Analysis (SWxDSL-8GR)Bidirectional monitoring of TMC/CSC/EOC channelsTelcordia GR-303-CORETMC/CSC monitoringEOC verification GR-303 EOC Decode (SWxDSL-8EOC)Complete decode of embedded operations channel to Layer 7Supports ASN.1, ROSE, CMISE, GR-303-IMD SS7 Protocol Analysis (SWxDSL-8SS7)Supports protocol analysis for SS7 TUP, ISUP, SCCP, SNM, SNT messagesSupports Bellcore TR-NWT-000246, ITU-T Q.700 series (General, Message Transfer Part, SCCP, TUP, ISUP, TCAP), Chinese (14 and 24 bits) standardsCapture and store messages for decoding and protocol analysisCapture Layer 1 eventsFilters: PRE & POSTMessage storage SS7 TCAP Analysis (SWxDSL-8TCAP)ANSI T1.114TCAP filter and decode Frame Relay Basic (SWxDSL-8FR)LMI standards: ITU-T Q.933, ANSI T1.617, LMI (DLCI 1023, GOF Vendors), NO LMIModes: UNI DTE, UNI DCE LMI AnalysisResults: Link OK Total, Link Errored Total, Timeout Error, Response Sequence Number, Wrong MessagePVC Status PING TestResults: Number of PINGs, Number of PINGs sent, PING status (Received, Unreached, Errored), Round Trip Time (Current, Average, Maximum, Minimum)InARP supportEcho PINGIP encapsulation conforms to RFC1490 specification FOX TestResults: PVC Status, Current Rate, Errored Frames, RSN Error, SSN Error, Frame Check Sequence (FCS) Error, Count of Frame Received with FECN, with BECN, with DE, Count of transmit frames, Count of received frames Statistics AnalysisT1 monitoringFrame relay performance and statisticsDLCI analysis and statistics Frame Relay NNI (SWxDSL-8NR)LMI standards: ITU-T Q.933, ANSI T1.617, LMI (DLCI 1023, GOF Vendors), NO LMIModes: NNI USER, NNI NETWORK LMI Analysis, PING Test, FOX Test, Statistic Analysis - as described in Frame Relay Basic section DDS Testing (SWxDSL-8DDS)Choose receive and transmit timeslots independentlyLoopbacks: Latching, interleaved; CSU, DSU, OCU, DS0-DP, 8-bit userMeasurements: Bit errors, Bit error rateControl code send/receive: Abnormal, mux out-of-sync, idle Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Sell Smarter with Kyozou.Inventory and Ecommerce Management

Price: 125 USD

Location: Southgate, Michigan

End Time: 2024-10-22T14:17:37.000Z

Shipping Cost: N/A USD