Speedway Fits Ford 9 Inch Bolt-In Rear End Axle for 1968-72 GM A-Body

Description: Designed to replace the original '68-'72 GM A-Body rearend housing, Maintains factory hub to hub dimension of 60.75", All new stamped steel housing and fully welded 3" tubes - Bare steel, New Big Ford style ends - accepts 2.5" offset Ford style brake kits, New 31 spline axles with bearings installed 1/2" lug studs Speedway Ford 9 Inch Bolt-In Rear End Axle for 1968-72 GM A-Body Sku # 99006872 Mfr. Part # 99006872 Condition New Brand Speedway Motors Sold Each Details Info These bolt-in rear axle packages are designed to replace the original '68-'72 GM A-Body rearend housing and are compatible with the stock 4-link trailing arm rear suspension found in your Chevelle/Malibu/El Camino/Sprint/GTO/LeMans/Tempest/F85/Cutlass/442/Special/Skylark/Gran Sport. The major advantages gained by upgrading to a Ford 9" axle include a) greatly increased strength (reliability), b) the variability of the housing to accept almost any gear ratio from 2.47:1 to 6.14:1, c) a drop-out third member for ease of service, and d) steel axle retainers keep the axle/wheel in place in the event of axle failure. Here are the features you'll find in our fabricated Ford 9 Inch axle kits: New stamped steel housing center piece New billet steel housing ends with oil seal surface ("Big New Ford" Torino-style) 3" O.D. DOM 3/16" wall axle tubes 31-spline axles w/ bearings, studs & retainers Axles have 2.5" of offest on each side 1/2"-20 wheel studs, 2" long (0.618" knurl diameter) - see part # 910-959001 for 7/16" thread option) 5 x 4-3/4" wheel bolt pattern Jig welded suspension brackets for stock style suspension Built to stock width Works with most aftermarket coil-over conversion kits Housing Flange to Flange - 55.75" Axle Hub to Hub - 60.75" Add third member and brake kit of your choice (both sold separately) to complete your installation. Installation Tips Rearend Housing 3rd Member Carrier Studs are not included but available as # as needed Specs Sold in Quantity Kit Bolt Pattern 5 on 4.75" Finish Natural Housing Material Steel Hardware Included Yes Tube O.D. 3 Position Rear Rotors Included No Wheel Studs Included Yes Axle Splines 31 Ring Gear Size 9 Inch Axle Type Semi-Floating Differential Included No MFG. Part # 99006872 Brakes Included No Bearings Included Yes Seals Included Yes Wheel Bolt Pattern (in.) 5x4.75 in. Axle Shafts Included Yes Ring and Pinion Included No Third Member Included No Reviews Nice rear end Housing. Everything you could ask for A body Rated by Dok on December 13, 2021 Summary: Product is well made and inline with all mounts. Yes, I recommend this product. Great Product - Missing T-Bolts Rated by Patrick on July 28, 2021 Summary: Great product but nowhere online does it mention T-Bolts that are not included. This is a conversion for GM A-Body, customers do not know what T-Bolts are (the standard GM bolts will not work and they are not available locally) and they should be either included or at least mentioned in the product description. I got my rear end and had to wait another week for T-Bolts. So yes if you are following Project Chevelle and ordering parts dont forget the T-Bolts! Yes, I recommend this product. Looks like a high quality piece Rated by 69 El on May 10, 2021 Summary: This will be for a 9 inch conversion in a 1969 El Camino. All the parts were included for axle installation and 3rd member. The housing has nice welds. I will use a speedway 3rd member and a disc brake package also from speedway in the installation. The car currently has a big block with a five speed coupled to a non posi GM differential so there is a lot of wheel spin making it difficult to judge the power. Looking forward to see what its like with the new differential! Yes, I recommend this product. Good value for the assembly but the packaging poor. Rated by Les on July 31, 2019 Summary: This was the best value I found for the assembly. Yes, I recommend this product. When in smooth. Rated by Lucas on December 29, 2018 Summary: The shop that put it in said it was easy to install. Related Items / Suggested Parts Speedway Motors Rear Control Arms with Sway Bar, 1968-72 A Body 9 Inch Ford Rearend Axle Housing 3rd Member Carrier Studs 1968-72 A-Body Ford 9 Inch Housing/Axles with Coilover Suspension Currie 95304 7/16 x 1-11/16 Inch Wheel Stud, .610 Knurl Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 1083.99 USD

Location: Lincoln, Nebraska

End Time: 2024-12-15T18:14:06.000Z

Shipping Cost: N/A USD