Sonos - Playbar Wireless Soundbar

Description: Important Notes, please read before buy:Have some signs of normal and moderate use do not affected the work or perform. (Please See Pictures For Reference).This is a used in very good condition device, DO NOT Include any warranty (original warranty is already expired)Returns not accepted.PlaybarHome theater soundbar and streaming music speaker in one—Sophisticated 9-speaker design.Simple two-cord setup. One for power. One for your TV.Mount horizontally above or below the TV or place flat on a TV stand.Easily expandable. Add a Sub and two Sonos speakers for 5.1 surround sound. For more information, see Sonos home theater.Works with either or .See Getting started when you’re ready to add a Playbar to your Sonos system.Note:The grille cloth is not removable. Tampering with the cloth may damage your Playbar. Controls and lights Volume up (+)Volume down (-)Press to adjust the volume.Note:You can also use the app and remote control. Play/PausePress once to play or pause music.Press twice to skip to the next song (if applicable to the selected music source).Press three times to go back to the previous song.Press and hold to add the music playing in another room.Note:You can’t skip forward or go back when listening to a radio station. Status lightIndicates the status. Learn moreIf the light is distracting, you can turn it off in your room’s settings. IR sensor lightThe IR (InfraRed) sensor receives signals sent by a remote control.When the Playbar receives a volume or mute command, the IR light displays momentarily.You can adjust this setting so the light never displays in the room’s settings.Connector panelEthernet ports (2)Use the supplied Ethernet cable if you want to connect to a router, computer, or network-attached storage (NAS) device (optional).Digital audio IN (optical)Use an audio optical cable to connect the Playbar to your TV.AC power (mains) inputUse only the supplied power cord (using a third-party power cord will void your warranty).Note:Insert the power cord firmly until it is flush with the speaker.IR repeaterAllows the commands from your remote control to reach your TV if the Playbar is positioned in front of the TV. This setting is on by default, but can be turned off in the room’s settings.Select a locationYou can mount the Playbar to a wall above or below your TV or place it on a credenza.Placed on a credenzaPlace horizontally on a stable and level surface at least 2" (50mm) from TV.Don’t place vertically or on its side.Don’t block the TV’s IR sensor.For best sound quality, place with the connector panel toward the TV (Sonos logo is closer to TV).Don’t place in a cabinet or on a shelf.Keep both ends of the Playbar at least 1' (30cm) from a wall or other obstruction.Wall mountedTo put Playbar on a wall, see Wall mount.Connect the cablesBefore you startDisconnect existing home theater or surround sound equipment from your TV.Connect any external devices, like a cable box or DVD player, directly to your TV.Connect the soundbar to your TVRemove the protective cap from each end of the optical audio cable.Connect the optical audio cable from your TV’s digital audio OUT (optical) to the Playbar’s digital audio IN (optical). Don’t twist or bend the cable.Note:The Playbar’s digital audio IN port and the optical cable are ‘D-shaped’—make sure the connector aligns correctly into the port. Connect the power cordAttach the power cord and plug in the Playbar. Push the power cord in firmly until it is flush with the surface.

Price: 200 USD

Location: Watsonville, California

End Time: 2024-12-10T18:25:09.000Z

Shipping Cost: N/A USD