Skunk2 Pro Series 88-01 Honda/Acura B16A/B/B17A/B18C Intake Manifold

Description: Intake ManifoldPro Series Intake ManifoldPro Series Intake Manifold; 70mm TB Opening; Can Be Inlet Matched To 74mm; As Cast; SPECIFICATIONS: Color: Cast AluminumCylinder Head Type: StandardEmission: N/AGasket Or Seal Included: NoMaterial: AluminumNew Or Remanufactured: NewNumber of Carbs: None; For Fuel InjectionPosition: N/ARPM Range: N/AUsage: Street/Hi-PerformanceWARNING CA Proposition 65: YesWARNING CA Proposition 65 Message: WARNING: This product can expose you to chemicals including lead; which is known to the State of California to cause cancer. For more information; go to www.P65Warnings.ca.gov. FEATURES: Ideal For Turbocharged And Naturally Aspirated Applications70mm throttle Body Opening Can Be Port-Matched Up To 74mmEliminates Secondary ButterfliesMore than a decade ago, Skunk2's engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2's Pro Series Intake Manifold for Hondas B-series VTEC engines (non-GS-R) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the 'street enthusiast' who wants more power but doesn't want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2's cast-aluminum Pro Series Intake Manifolds for Honda's B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors' manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head's ports. Skunk2's Pro Series Intake Manifold's shape and design also increases wave scavenging effects at the engine's ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2's Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality.All Skunk2 products are carefully planned and designed in-house using the latest computer simulation and modeling techniques, followed by careful testing in controlled laboratory environments using state-of-the-art equipment. Each product is then subjected to rigorous dyno, street, and race track testing to ensure proper performance in the most extreme conditions. For these reasons, top street cars and race cars worldwide rely on Skunk2 products. Skunk2 Pro Series 88-01 Honda/Acura B16A/B/B17A/B18C Intake Manifold Intake ManifoldPro Series Intake ManifoldPro Series Intake Manifold; 70mm TB Opening; Can Be Inlet Matched To 74mm; As Cast; SPECIFICATIONS: Color: Cast AluminumCylinder Head Type: StandardEmission: N/AGasket Or Seal Included: NoMaterial: AluminumNew Or Remanufactured: NewNumber of Carbs: None; For Fuel InjectionPosition: N/ARPM Range: N/AUsage: Street/Hi-PerformanceWARNING CA Proposition 65: YesWARNING CA Proposition 65 Message: WARNING: This product can expose you to chemicals including lead; which is known to the State of California to cause cancer. For more information; go to www.P65Warnings.ca.gov. FEATURES: Ideal For Turbocharged And Naturally Aspirated Applications70mm throttle Body Opening Can Be Port-Matched Up To 74mmEliminates Secondary ButterfliesMore than a decade ago, Skunk2's engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2's Pro Series Intake Manifold for Hondas B-series VTEC engines (non-GS-R) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the 'street enthusiast' who wants more power but doesn't want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2's cast-aluminum Pro Series Intake Manifolds for Honda's B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors' manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head's ports. Skunk2's Pro Series Intake Manifold's shape and design also increases wave scavenging effects at the engine's ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2's Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality.All Skunk2 products are carefully planned and designed in-house using the latest computer simulation and modeling techniques, followed by careful testing in controlled laboratory environments using state-of-the-art equipment. Each product is then subjected to rigorous dyno, street, and race track testing to ensure proper performance in the most extreme conditions. For these reasons, top street cars and race cars worldwide rely on Skunk2 products. Intake ManifoldPro Series Intake Manifold Pro Series Intake Manifold; 70mm TB Opening; Can Be Inlet Matched To 74mm; As Cast; SPECIFICATIONS: Color: Cast AluminumCylinder Head Type: StandardEmission: N/AGasket Or Seal Included: NoMaterial: AluminumNew Or Remanufactured: NewNumber of Carbs: None; For Fuel InjectionPosition: N/ARPM Range: N/AUsage: Street/Hi-Performance FEATURES: Ideal For Turbocharged And Naturally Aspirated Applications70mm throttle Body Opening Can Be Port-Matched Up To 74mmEliminates Secondary ButterfliesMore than a decade ago, Skunk2's engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2's Pro Series Intake Manifold for Hondas B-series VTEC engines (non-GS-R) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the 'street enthusiast' who wants more power but doesn't want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2's cast-aluminum Pro Series Intake Manifolds for Honda's B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors' manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head's ports. Skunk2's Pro Series Intake Manifold's shape and design also increases wave scavenging effects at the engine's ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2's Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality.All Skunk2 products are carefully planned and designed in-house using the latest computer simulation and modeling techniques, followed by careful testing in controlled laboratory environments using state-of-the-art equipment. Each product is then subjected to rigorous dyno, street, and race track testing to ensure proper performance in the most extreme conditions. For these reasons, top street cars and race cars worldwide rely on Skunk2 products. Skunk2 Pro Series 88-01 Honda/Acura B16A/B/B17A/B18C Intake Manifold Item Description Intake ManifoldPro Series Intake ManifoldPro Series Intake Manifold; 70mm TB Opening; Can Be Inlet Matched To 74mm; As Cast; SPECIFICATIONS: Color: Cast AluminumCylinder Head Type: StandardEmission: N/AGasket Or Seal Included: NoMaterial: AluminumNew Or Remanufactured: NewNumber of Carbs: None; For Fuel InjectionPosition: N/ARPM Range: N/AUsage: Street/Hi-PerformanceWARNING CA Proposition 65: YesWARNING CA Proposition 65 Message: WARNING: This product can expose you to chemicals including lead; which is known to the State of California to cause cancer. For more information; go to www.P65Warnings.ca.gov. FEATURES: Ideal For Turbocharged And Naturally Aspirated Applications70mm throttle Body Opening Can Be Port-Matched Up To 74mmEliminates Secondary ButterfliesMore than a decade ago, Skunk2's engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2's Pro Series Intake Manifold for Hondas B-series VTEC engines (non-GS-R) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the 'street enthusiast' who wants more power but doesn't want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2's cast-aluminum Pro Series Intake Manifolds for Honda's B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors' manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head's ports. Skunk2's Pro Series Intake Manifold's shape and design also increases wave scavenging effects at the engine's ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2's Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality.All Skunk2 products are carefully planned and designed in-house using the latest computer simulation and modeling techniques, followed by careful testing in controlled laboratory environments using state-of-the-art equipment. Each product is then subjected to rigorous dyno, street, and race track testing to ensure proper performance in the most extreme conditions. For these reasons, top street cars and race cars worldwide rely on Skunk2 products. Intake ManifoldPro Series Intake Manifold Pro Series Intake Manifold; 70mm TB Opening; Can Be Inlet Matched To 74mm; As Cast; SPECIFICATIONS: Color: Cast AluminumCylinder Head Type: StandardEmission: N/AGasket Or Seal Included: NoMaterial: AluminumNew Or Remanufactured: NewNumber of Carbs: None; For Fuel InjectionPosition: N/ARPM Range: N/AUsage: Street/Hi-Performance FEATURES: Ideal For Turbocharged And Naturally Aspirated Applications70mm throttle Body Opening Can Be Port-Matched Up To 74mmEliminates Secondary ButterfliesMore than a decade ago, Skunk2's engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2's Pro Series Intake Manifold for Hondas B-series VTEC engines (non-GS-R) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the 'street enthusiast' who wants more power but doesn't want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2's cast-aluminum Pro Series Intake Manifolds for Honda's B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors' manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head's ports. Skunk2's Pro Series Intake Manifold's shape and design also increases wave scavenging effects at the engine's ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2's Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality.All Skunk2 products are carefully planned and designed in-house using the latest computer simulation and modeling techniques, followed by careful testing in controlled laboratory environments using state-of-the-art equipment. Each product is then subjected to rigorous dyno, street, and race track testing to ensure proper performance in the most extreme conditions. For these reasons, top street cars and race cars worldwide rely on Skunk2 products. Shipping We ship Monday-Friday and strive for orders to ship within 1-2 business days. We use UPS and FedEx for the majority of our orders but reserve the right to use alternative but comparable means to get you your product as quickly and efficiently as possible. All orders will require a physical address, please provide this upon ordering to expedite the shipping process. Even with our huge inventory, we may run out of an item. If this is the case you will receive an email with an expected availability date. Returns & Warranty We offer 30 Day Free Returns. Refunds for returns will be given once the item has been received and inspected. Items must be New, Unused, Not Installed, in the Original Packaging and able to be resold. Incomplete returns may not be eligible for this policy. Please message us to start a return. Warranty on product is replacement of part only for defects in materials and workmanship. No cash or compensation for labor will be given for defects in material and workmanship. Defective part must be returned in order for new part to be provided. OUR COMMITMENT We are committed to making sure that you leave this transaction satisfied. We value your feedback, and we strive to do everything we can to earn Five Stars and Positive Feedback on every order. If you are unhappy with your purchase for any reason, please CONTACT US prior to leaving feedback so that we can make things right for you. Contact Us We encourage our Buyers to communicate with us at any time. Feel free to contact us directly through eBay. All emails will be responded to within 24 hours. We look forward to hearing from you! Powered By 3Dsellers.com - Try for Free!

Price: 292.86 USD

Location: Memphis, Tennessee

End Time: 2024-08-09T20:01:29.000Z

Shipping Cost: 0 USD