Description: Set of 3 Replacement knobs for repairing CARVER MXR-130, MXR-150, CARVER 900, 2000, and THE RECEIVER. Rectangular front knobs are suitable for Speaker Select, Tape Select and Tape Monitor switches. These knobs have been built specifically to replace breakage-prone Carver selector knobs. Machined from high strength aircraft aluminum, these knobs will not break. They have been meticulously color matched to the original parts. Knobs attach to the switch shaft using two hex head set screws (a FREE hex driver is included with each order!). The knobs are dimensionally very similar to the original Carver knobs. The parts are brand new and will be shipped in protective packaging. The listing is for knobs only, not the complete receiver. Installation Instructions: Slide the knob over the shaft of the switch. If the knob doesn't slide over the shaft easily, use the hex key (tool included with the knob) to back out the set screws until the knob slides over the shaft. Next, use the hex key to tighten the two set screws to secure the knob in place. Orient the knob with the set screws down so they are inconspicuous. Customer feedback: "A+ This is a Great Product" "Fast shipping and very pretty knobs!! Thanks." We offer the following parts for Carver receivers and tuners: Refurbishment kit that contains the parts most likely to fail on a Carver receiver (Relays, trim caps, power supply resistor) High performance voltage regulator assembly to replace the burnt-up-ugly-mess of resistors on mxr-130 and -150 Main Board and Noise Reduction board Capacitor replacement kit for the MXR-130/-150 Power Supply/Amplifier board to fix power supply problems and improve audio quality 42V/63V Power Supply Capacitor replacement kit for the MXR-130/-150 to fix power supply hum problems and improve audio quality Output relays for noisy, intermittent or failed outputs TC9147BP tuner ICs for failed tuner sections Single knob for Speaker Select, Tape Select or Tape Monitor Switch See our other listings for other interesting and helpful electronic solutions! Please send an e mail if you have any questions. We love classic audio equipment. We have worked with Carver equipment for nearly 30 years, and want to help the community get the most enjoyment out of their systems! We also repair Carver equipment at our location. Let us know what you need! Shipping is charged only on the first item. Additional parts are shipped with NO additional cost!!! Buyer to prepay with Paypal and pay $4.50 flat rate for shipping and professional packing (additional shipping cost outside the US). Positive feedback will be left for successfully completed transaction.
Price: 34.95 USD
Location: Goleta, California
End Time: 2024-09-12T04:19:15.000Z
Shipping Cost: 4.5 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Type: Speaker Select, Tape Select, Tape Monitor
Compatible Model: MXR-130, MXR-150, CARVER 900, 2000, THE Receiver
Unit Quantity: Set of 3 Knobs
