Scaletrains SXT40179 Rivet Counter Rio Grande (D&GRW) GP40 #3089 DCC & Sound

Description: Scaletrains SXT40179 Rivet Counter Rio Grande (D&GRW) GP40 #3089 DCC & Sound Images are representative of the paint scheme. Item for purchase is #3089 HO Scale All-new modelEra: 1970s-era Series 3086 to 3093, built Nov/1971D&RGW 3087, 3088, 3089, 3090, and 3093:EMD square-corner “Burnham” number boardsD&RGW 3092:Original EMD number boardsFully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive*LED-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors, and round walkway light aft of raised walkway duct*LED-illuminated Mars SBW-2-301 dual signal light (clear lenses) mounted in low short hood*LED-illuminated tri-color, flush-mounted front and rear class lights with raised gaskets***Printed number boards with separately-controlled, backlit LED-illumination*Front EMD low plow with MU hose doors3-hose multiple unit (MU) hose groups with mounting bracket and gladhand detailSemi-scale coupler buffers equipped with durable metal semi-scale Type E knuckle couplersFront and rear straight uncoupling levers without loop handlesSquare-corner pilot face with angled lifting slots, front and rear“Late” tall deck-mounted multiple-unit (MU) receptacles, front and rear“Tall” stepwells with “zig-zag” pilots, front and rearEnd handrails with deck-mounted stanchions, front and rearFront and rear early small deck extensionPositionable straight (late) drop steps, front and rearLate treadplate81” low short hood with ratchet handbrakeLate drop grabs and standard nut-bolt-washer (NBW) mounting on nose front and topLatched battery box doors with narrow louvers and tab-style (early) hingesEarly cab sub-base doors with non-terminating reinforcement ribs, both sidesDual right rear cab stepsLate cab step guards (short taper)Hopper water piping underneath front battery box stepStandard EMD high headlight with glare visors in numberboard housing“35-Line” cab with standard armrests, and flag holder bracket on right side (D&RGW)Detailed cab interior with separate floor, cab blowers, rear wall, early seats, and standard AAR control standPositionable cab side windowsTall square-corner clear wind wings mounted fore and aft of cab side window, both sides of cabStandard EMD sunshades with long mounting tracksLost-wax cast brass Nathan AirChime M3 (M3R1) horn mounted on number board housingExcalibur low-profile “ice skate” communications antenna mounted to cab roofLong hood with standard electrical cabinet seam, bolted generator compartment door, and late inertial drain hole placement (close spacing on engineer’s side, high on fireman’s side)Small ECAFBLate (ribbed) blower duct housingLate long handrail stanchion spacing with all “tall” stanchions overallEarly inertial air intake grilles without drip rails Standard turbo exhaust stackLate standard-range dynamic brake housing (long tapers), with rectangular ventSee-through 48” dynamic brake fan housing mounted on riser ring with 10-blade fan and hub assembly, with concentric-ring grill Dynamic brake intakes with see-through intake vanes, and resistor grid detail inside of the housingRectangular-mesh radiator intake screeningSee-through standard-height 48” radiator fan housings with 8-blade fan and hub assemblySeparately-applied radiator core detail mounted inside of long hood, visible under radiator fansCurved radiator fan grab ironRear LED-illuminated horizontal headlight and standard housingLate rear sander door catch placement (outboard)Underbody frame rails with separately-applied plumbing and traction motor cable bundle detailsDetailed Blomberg-B truck frames (LFM-cast) with Hyatt bearing housings, separately-applied brake cylinders in released (piston retracted) position, elliptical springs, end transom detail, separate sanding lines and brackets, and separate swing hanger detailSeparately-applied flexible neoprene sanding lines at both ends of trucksRust-color painted wheelsetsEarly EMD speed recorder mounted to right #1 axle“McCarty” type re-rail frogsACI labels mounted to blower duct on left side, and rear cab step kickplate on right sideStandard 4 jacking padsFrame-mounted bellSalem-brand #824-170 and #818-170 primary and secondary centrifugal air filters, respectively (accordion-style)Separately-applied brake vent regulator valve and plumbing detail on underbody3600-gallon fuel tank with late mounting brackets, inset dial gauge on both sides, and late rear drain barSeparately-applied fuel fillers, drains, and breather piping on fuel tanksSeparately-applied engine oil sump drain fitting with hoseSeparately-applied radiator water drain fitting on underbodySeparately-applied truck air line plumbing on underbody above each truck, both sidesSeparately-applied wireform grab irons, wireform lift rings, etched windshield wipers, trainline hoses, sand hatch covers, and moreMotor with 5-pole skew-wound armatureDual flywheelsAll-wheel driveAll-wheel electrical pick-upDirectional LED-illuminated headlightsPrinting and lettering legible even under magnificationOperates on Code 70, 83, and 100 railPackaging safely stores modelMinimum radius: 18”Recommended Radius: 22”If you are making multiple purchases use add to cart and it will automatically do combined shipping for addresses within the USA. I will not do combined shipping for separate transactions/orders when using "buy it now" option Canadian Customers: We use UPS Standard Service for Canadian addresses. Items are shipped from the store in Ontario, Canada. UPS WILL NOT DELIVER TO PO BOX ADDRESSES. Canada Post is available for an additional cost. If you are purchasing multiple items, It will not automatically do combined shipping discount. You will need to use request total & if not i can refund the difference after postage value is known when label is made.

Price: 332.99 USD

Location: St Thomas, Ontario

End Time: 2025-01-21T22:00:06.000Z

Shipping Cost: 18 USD