Description: Saniflo 008 Sanivite Drain PumpThe Sanivite drain pump is used to pump gray water away from a variety of fixtures in commercial and residential applications. The system is able to discharge the waste up to 16 feet vertical and/or 150 feet horizontal. This model was designed to sustain the toughest applications as it is capable of handling hot water and grease. Discharges the waste through either a 1", 1-1/4" or 1-1/2" rigid pipe. A non-return valve is included on the discharge elbow assembly provided with the system. This elbow can be rotated 360 degrees depending on the discharge installation.Has been designed with a 1-1/2" vent connection on the top of the lid. All plumbing codes require connection to a vent system. Either inlet located on top of the housing can be used for the vent or as an inlet. Please note that the vent system should be a two-way air vent as air needs to freely flow both ways. Note: The use of mechanical vents, air admittance valves or similar devices is not permitted.Discharges gray water from a kitchen sink, bath/shower, dishwasher, washing machine (indirect connection via laundry sink). The gray water will drain into the system via three inlets, two 2" inlets (with built-in check valves) on either side of the housing and one 1-1/2" inlet on top of the enclosure. Drain pump for kitchen installation or for any gray water application.For commercial or residential applications ↑ 16 Ft ↑ and/or ← 150 Ft →Perfect quiet solutionCapability to handle hot water and grease buildupAN EASY SOLUTION FOR A KITCHEN INSTALLATION OR FOR ANY GRAY WATER APPLICATIONDrain pump small enough to fit inside a kitchen cabinet with the capability to handle hot water and grease buildup.The perfect quiet solution designed with low drain inlets which facilitate the installation of showers and bathtubs in heavy-duty residential or commercial applications. Built-in check valves prevent any backup into the connecting fixtures. Technical SpecificationsPump Type: Drain pump Electrical:120V - 60Hz / 4.5 Amps (Max)Motor:0.4 HP oil-filled thermally protected motorCapacitor Rating:18 microfaradOperating Temperature:140°FPower Cord Length:42-1/2 inchesNoise Level:≤ 44 dBA (Lp) (measured at 3 ft.)Discharge Pipe Diameter:1" - 1-1/2"Discharge Rate at 25 ft:18 GPMDischarge Rate at 3 ft:29 GPMShut-off Head:30 ftNormal Running Time:3-5 seconds (short bursts)Capacity:3.7 gallons / 14 litersInlets:2" (sides), 1-1/2" vent (top)Method of Activation:Membrane / Microswitch Shower/Bathtub Base Height:6" minWeight:16 lbs / 7.25 kgCertifying Agencies:CSA (IPC, NSPC)Recommended Accessories:Descaler, SanialarmConnections:Sink, shower/bathtub, washing machine (indirect), dishwasher, laundry sink, etc.
Price: 486.74 USD
Location: Lawrenceburg, Kentucky
End Time: 2025-01-09T12:39:06.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Saniflo
Type: Sewage Pump
Horse Power: 0.4 HP
Custom Bundle: No
Model: Sanivite
MPN: 008