RS485 UART Modbus RTU HX711 Pressure Weight Sensor Electronic Scale DC 5V12V

Description: Packname: DC 5V 12V RS485 UART Modbus RTU HX711 Pressure Weight Sensor Electronic Scale Module for PLC Configuration Software 8 pcs WG18A02 RS485 Modbus RTU Weight Sensor Electronic Scale Module(Please choose the version you need) Features 1 Working voltage: 5V (5V version), 8-16V (12V version); 2 Working current: 12-15MA; 3 MODBUS RTU command supports 03, 06, 16 function codes; 4 RS485 interface/TTL232 interface optional 5 Sensor model: HX711, 24-bitADC 6 Load cell input signal range: ±20mv 7 Sampling rate: 10HZ or 40HZ can be set 8 The functions of baud rate, division value, zero-chasing range, median filter, average filter, dynamic tracking, etc. are integrated inside. 9 Default baud rate 9600 N 8 1, baud rate and parity bit optional 10 If the setting is wrong, you can short-circuit RESET for 5 seconds to restore the factory settings 11 In MODBUS RTU command mode, up to 247 devices can be used in parallel 12 size: 45*16.5*6.2mm 13 Weight: 4 grams For Modbus rtu command details, see WG18A02 Modbus RTU Commands For software usage, please refer to WG18A02TestTool Instructions for Use Pin description: VIN : Working Power+ GND : Working power- A+(T): RS485 A+/TTL232 TXD B-(R) : RS485 B-/TTL232 RXD E+ : Sensor Power+ E- : Sensor Power- A- : Sensor signal output- A+ : Sensor signal output+ Wiring diagram: Weight Sensor: Working voltage: DC 5-10V Working current: 200UA Measuring range: 0-1KG, 0-5KG, 0-10KG, 0-20KG Size: 80*12.7*12.7mm Weight: 30 grams Pins: Red: Power +, Black: Power -, Green: Output Signal +, White: Output Signal - Note: One end of the sensor is fixed through the screw hole, and the other end is kept in a suspended state, and gravity is applied in the direction indicated by the label. Special attention must be paid not to press the white glue-coated part directly, so as not to damage the sensor.

Price: 12.4 USD

Location: Guangzhou

End Time: 2024-11-23T03:58:12.000Z

Shipping Cost: 0 USD