RPM Rear Bearing Carrier Hoss Slash, Rustler, Nitro Slash, Stampede 4×4

Description: RPM Rear Bearing Carrier Hoss Slash, Rustler, Nitro Slash, Stampede 4×4 FITS Traxxas Slash 4×4, Rustler 4×4, Telluride, Nitro Slash, Stampede 4×4, Nitro Rustler, Nitro Stampede, Nitro Sport, Rad 2, Hawk 2, Eagle & Blue Eagle LSII Replaces Traxxas stock #1952 & #1952XRequires 2 - 5x11x4mm bearings (not included) Let's face it: breaking parts sucks! When a part fails, the day is over. Not when your ride is equipped with RPM performance parts! Our newest muscle-laden product is a rear bearing carrier for the Slash 4×4, Rustler 4×4, Telluride, Nitro Slash & Stampede 4×4. The stock version simply can't handle hardcore carnage like RPM products can. Our version is 100% stock geometry-perfect, but with a few tweaks to improve durability significantly. A ring surrounds the bearing bores, providing additional rigidity while a redesigned camber rod mounting boss helps disperse impact energy more evenly throughout the length of the carrier's arm. Additionally, the bearing bores in our bearing carriers are designed to hold the bearings tight, meaning absolutely no bearing slop in the bearing bores! We also reduced the end-play of the axles by approximately 1/64", keeping your rear end tracking perfectly like it's supposed to. Obviously they wouldn't be perfect without our trademark blend of RPM nylons that make our products so indestructible. Our carriers are so strong (like all RPM molded products) that we back them with a limited lifetime warranty against breakage! While we designed these bearing carriers with the Traxxas Slash 4×4 in mind, they are direct replacement parts for all of the following vehicles as well: Rustler 4×4, Stampede 4×4, Telluride, Nitro Rustler, Nitro Stampede, Nitro Sport, Rad 2, Hawk 2, Eagle & Blue Eagle LSII! If you're tired of ending a fun day due to breakage, we're here to solve that problem. Check us out; you'll be glad you did! FITS Traxxas Slash 4×4, Rustler 4×4, Telluride, Nitro Slash, Stampede 4×4, Nitro Rustler, Nitro Stampede, Nitro Sport, Rad 2, Hawk 2, Eagle & Blue Eagle LSII Replaces Traxxas stock #1952 & #1952X Requires 2 - 5x11x4mm bearings (not included) Let's face it: breaking parts sucks! When a part fails, the day is over. Not when your ride is equipped with RPM performance parts! Our newest muscle-laden product is a rear bearing carrier for the Slash 4×4, Rustler 4×4, Telluride, Nitro Slash & Stampede 4×4. The stock version simply can't handle hardcore carnage like RPM products can. Our version is 100% stock geometry-perfect, but with a few tweaks to improve durability significantly. A ring surrounds the bearing bores, providing additional rigidity while a redesigned camber rod mounting boss helps disperse impact energy more evenly throughout the length of the carrier's arm. Additionally, the bearing bores in our bearing carriers are designed to hold the bearings tight, meaning absolutely no bearing slop in the bearing bores! We also reduced the end-play of the axles by approximately 1/64", keeping your rear end tracking perfectly like it's supposed to. Obviously they wouldn't be perfect without our trademark blend of RPM nylons that make our products so indestructible. Our carriers are so strong (like all RPM molded products) that we back them with a limited lifetime warranty against breakage! While we designed these bearing carriers with the Traxxas Slash 4×4 in mind, they are direct replacement parts for all of the following vehicles as well: Rustler 4×4, Stampede 4×4, Telluride, Nitro Rustler, Nitro Stampede, Nitro Sport, Rad 2, Hawk 2, Eagle & Blue Eagle LSII! If you're tired of ending a fun day due to breakage, we're here to solve that problem. Check us out; you'll be glad you did!

Price: 10.95 USD

Location: Fort Lauderdale, Florida

End Time: 2024-09-15T00:18:42.000Z

Shipping Cost: 2.95 USD