Roland/Akai Memory Data Card 16 x 256MRAM or 8 x 512MRAM -4MB for JD+JV Series

Description: Hello Synth Lovers! With great acceptance of the card we have a NEW DESIGN - Exclusive Roland JD-800/JD-990/JV-80/JV-1000/JV-1080/JV-2080 !!! As our appreciation of business every card purchased will include an exclusive case to protect for whatever occasion you want to take it. Or simply from dust over time to keep card sitting when you remove from your Roland! This card original circuit was fully developed by DoJoe - J. Fenkes and with the great community of keyboard lovers. HALG modified the mechanical, the circuit, and incorporated couple important changes: ✔ The 3 main slide switches that are on the back of the card are stronger now;✔ The components will be hidden inside of keyboard or module and only plastics cover will be seeing;✔ A card enclosure was designed to protect the card when you need to carry around✔ A plastic case now fits perfectly to cover components and switches; This memory card is a replacement for Roland’s M-128, M-256 and M-512 cards, as well as the electrically compatible Akai BR-16 and BR-32 cards. Compared to the original cards, this card has two advantages:✔ It does not require a backup battery. It uses magnetoresistive RAM for storage rather than regular static RAM, which is a type of RAM that can typically keep its data for twenty years before it needs to be refreshed. ✔ A single card actually stores 16 M-128 / M-256 cards or 8 M-512 cards, which can be accessed by a pair of switch sliders at the rear end of the card. ✔ Like the original card, it also comes with a write protect switch. Installation:To insert the card into the card slot for keyboards, the side with the electronic components should face upwards (the same way the side with the arrow would go on an original card) Configuration:Whether your card is a 16x256 or 8x512 card is determined by a solder jumper on the card, marked JP1 on the top of circuit board. The jumper consists of three gold pads, two of which are connected by a small blob of solder. This card comes configured 16 x 256K MRAMWith the plastic case is perfect for Roland JD-800/JD-990/JV-80/JV-1000/JV-1080/JV-2080 Compatibility List:While the card design is as close to the original cards as possible, there is a small number of devices that is not yet compatible with our replacement cards. The card will also fit on those keyboards/modules below. Tested and fully compatible: Roland JD-800, JD-990, JV-80, JV-1000, JV-1080, JV-2080, R-880 (GC-8), R-8M, GR-1, GR-50, PM-16, TR-626, Akai MX-1000, VX600.Mostly compatible: Roland TD-10, TD-20. The card reportedly has errors when inserted allthe way, but pulled back 1/8th of an inch it works fine. Not compatible: Roland VG-8, Peavey Tubefex.Some units like the Roland U-110 and U-220 only accept ROM cards, not RAM cards.As a quick hint your card has several banks of memory blank yet. By the very first time the keyboard access that bank, you might see on screen "Illegal Card", but just ignore it and continue with your process to Format it. Once the bank is formatted you no longer will see those messages.YOU will receive 1 card configured to be 16 x 256K MRAM + 1 exclusive case ready to be used as you see on the picture + Manual.Board size is 5.85L in x 2.13W x 0.065 inPlastic cover is 5.48L x 2.49W x 0.665H The card must be Formatted before using it on your keyboard/Module! This card is fully functional and 100% tested!Bid with confidence Non Return ACCEPTED!

Price: 125 USD

Location: Canton, Michigan

End Time: 2024-09-30T02:18:11.000Z

Shipping Cost: 0 USD