RF Sampler Modulation monitor 1-50 MHz See your signal - All Modes

Description: Modulation Monitor (CW, SSB, AM, FM, Data)RF Sampling Port - Toroid Transformer Version With N Sockets An RF sampling port from Electro-Resales, based on a toroid transformer design, designed to provide a safe sampling voltage of applied RF, so you can 'see' your modulation live on an oscilloscope connected to the sampled BNC port. RF energy is sensed by the toroid secondary and provides a 30db reduction of the original signal up to 50 Mhz at the BNC sampling port. The sampler can also be used at VHF and UHF frequencies, with a reduced sampled output. Correctly terminated at 50 Ohms, so you don't need to provide external termination. Two N Type pass-thru sockets provide a SWR neutral (1:1) path for your RF, the sampled energy is available at the BNC. Insertion loss measured at 14.200 MHz was determined at -0.12db (in other words no insertion loss). At 100% duty cycle the sampler can handle 100 Watts of continuous power, with a peak output max. of 200 Watts, not to exceed 5 minutes duration with 15 minute gaps at this power level. PLEASE NOTE:Samplers maybe supplied with thru' hole mount (single nut) or chassis mount (uses nuts and bolts) N Type socket style, this has no effect on performance of the device.See photos for more details. Connectors, cables, radios, dummy loads shown in photo/diagrams, not included in sale, only the sampling port/tap is included. See photos in sale description and download user guide at wwwdotelectroresalesdotcom

Price: 37.79 USD

Location: Olathe, Kansas

End Time: 2023-09-12T00:03:02.000Z

Shipping Cost: N/A USD