R 7210 Drawer Slide Kit – Replace Drawer Track Hardware

Description: INSTALL OR REPLACE DRAWER TRACK HARDWARE – Whether you are installing new drawers or repairing one that won’t open or close properly, Drawer Slide Kit fits most bottom/side-mounted drawer systems. The drawer slide kit is constructed of steel tracks with a white powder coated finish and self-lubricating plastic rollers. SELF-CLOSING DESIGN – The smooth-gliding tracks in theR 7210 kit features a self-closing design that commences at the final 2-1/2 inch from the end of the 15-3/4 inch long tracks when closing. EASY TO INSTALL – Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on’s website. 75 LBS MAXIMUM SAFE LOAD CAPACITY – The maximum safe load capacity for the drawer slide kit is 75 lbs. and is for use in 16 inch deep drawer cabinets. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks. INSTALLATION TIP – The clearance required between the drawer and the drawer opening for these slides is: 1/2 inch on left and right sides, 1/4 inch at the bottom and 5/8 inch at the top. NOTE - Please refer to the line art for dimensions and compare with your needs before ordering SPECIAL NOTE: Be sure to consider installing part number R 7240 as the back bracket if your drawer does not currently have one, or is damaged

Price: 10.32 USD

Location: Denver, Colorado

End Time: 2024-10-03T21:46:18.000Z

Shipping Cost: 0 USD