Quick Hair Trigger (PETG) for Adventure Force Nexus Pro

Description: This Quick Trigger for the Adventure Force Nexus Pro replaces the stock trigger and shortens the distance required to fire the blaster. This part is a must for games where you need to get those shots off fast! Functions as a safety delete too! Standard thickness is equivalent to a lot of Nerf blasters such as the Hammershot. The Thick option is slightly thicker than most Nerf blasters and even most Dart Zone / Adventure Force blasters (about 50% thicker than Standard). I personally recommend Standard as it feels more tactile and less toy-like though, if you tend to grip the blaster very hard, you may want to try the Thick option. NOTE: Regarding the compatibility with the priming lock, I had one customer report an issue with their blaster pump grip needing to be jiggled in order to prime. However, my quick trigger doesn't interact with that piece so it is likely just an issue with reassembly as I and others have used it without issue including in blasters with the priming lock still installed. I definitely recommend doing the prime lock removal but it is NOT necessary to use this trigger. Just make sure to be careful during reassembly and don't tighten the screws down on your priming locks too hard. Includes: 1x Adventure Force Nexus Pro Quick Trigger. Attribution: Designed by Transmogrification Labs. Installation: Easy. Disassemble the blaster, remove the old trigger, and this one goes right in its place. Notes about material: This product is printed in PETG material which offers superior thermal resistance and increased durability compared to PLA products. PETG has a higher glass transition temperature of 80°C whereas PLA is 60-65°C. For PLA, this is within range of the temperatures that often occur inside a vehicle during summertime so items made from PLA may end up warping in those situations. The same issue can possibly occur from exposure to direct sunlight if the temperature is high enough. PETG has a much higher glass transition temperature however so you are very unlikely to ever experience issues with it warping in addition to it just being stronger in general. PETG products do come at a higher cost than the same product in PLA because PETG takes longer to print and also requires more time to clean up after printing but the result is a very high-quality product. Disclaimer: All of my products are printed and tested with the utmost attention to detail. Despite this, I am NOT responsible for any damage incurred to you or your blasters through the use of any of these parts alone or a combination with others. It is up to you to keep yourself and your blasters in functioning condition. Some prints may have visual imperfections as is common to all 3D printing (especially for PETG). These slight imperfections will not interfere with mechanical function or integrity/strength. Powered by ExportYourStore.com

Price: 8.01 USD

Location: Huntsville, Alabama

End Time: 2024-12-04T15:32:21.000Z

Shipping Cost: N/A USD