Qty 2 Fits Subaru Forester 1998 to 2002 Wagon Tailgate Lift Supports

Description: Qty (2) Fits Subaru Forester 1998 To 2002 Wagon Tailgate Lift Supports 5 Year Warranty! This Listing is for 2 Supports which fit the Following Applications: 1998-2002 Subaru Forester Base Sport Utility 4-Door Liftgate (L-R) 1998-2002 Subaru Forester L Sport Utility 4-Door Liftgate (L-R) 1998-2002 Subaru Forester S Sport Utility 4-Door Liftgate (L-R) Specifications (See below for illustration): Extended Length: 25.00 Inches Compressed Length: 14.61 Inches Force: 409 = 92 Lbs. --> Qty (2) Fits Subaru Forester 1998 To 2002 Wagon Tailgate Lift Supports We have searched and found a great Manufacture of supports to import under our own name (Imported from Europe) Rust-resistant Black Nitride corrosion resistant piston rod extends product life. Easy lifting, reduced closing effort. Gas charged lift supports are used is a wide variety of applications including: hatches, hoods, trunk lids, tailgates, windows, tool box lid supports and many more. Meets or Exceeds OEM manufactures specification, Easy lifting, reduced closing effort. Please carefully read the title to insure you are ordering in the correct supports & Quantity --> Actual Compressed Length 14.61" 25.00" Actual Extended Length %%if(14.61="" OR $extendedlength="", "Qty (2) Fits Subaru Forester 1998 To 2002 Wagon Tailgate Lift Supports --> Gas Charged Lift Supports are energy storage devices which create force by compressing gas inside a cylinder. Each support is tested to perform as well as the original units and in many cases to exceed the manufactures specification. Important Notes about Lift Supports Each support is tested to perform as well as the original units and in many cases to exceed the manufactures specification, please ensure you replace all the supports in the compartment at the same time to ensure proper performance. Lift supports loose pressure over time, even sitting on shelves in most auto parts stores and many of the inventory liquidators on eBay. Our business is lift supports, and we make sure to sell newly produced units, keeping our inventory fresh and rotated. There are quite a few vendors on eBay that are advertising the Stabilus part numbers but different vendor names. Please take a moment and be sure of what they are actually offering is the Stabilus. We stock several thousand different supports supplied from various quality manufacturers that are not listed here. If we don't have it we can build many units to your specifications. Please contact us with the details of your requirements and we can research to find the best supports suited for your needs. Special lengths, different pressures or ends, send us the information. Have an existing support with part numbers on it send us any and all numbers that you can find. We are so confident with our Lift supports, we offer a Limited 5 Year Warranty! What is our Warranty on our merchandise? Depending on the product you are looking at warranties will vary. Listed is our warranty on Lift Supports:Lift Supports for the Hood, Trunk, Hatch, Liftgate or Tailgate ( None Electrical types): Are covered with a Limited 5 Year Warranty! A. Provided your original purchase was for a pair (unless your application only uses 1 lift support) B. These must be installed in the intended vehicle and the unit stops working properly or to your satisfaction. Lift Supports for other Automotive applications other than Hood, Trunk, Hatch Liftgate or Tailgate and Non-Automotive applications, Tonneau covers, package delivery vehicles, vintage vehicles manufactured prior to 1980, All Electrical types and special projects are cover for a period of 12 months. In the event the units stop performing after 180 days then you would be responsible to ship them to us and enclose a check for $13.90 per pair (for shipments inside the USA*) as well as proof of purchase from us to cover the return postage, and we will then send you the replacement unit. Please contact us before the units are shipped for an RMA number. *Additional charges apply for international shipments as well as Puerto Rico, HAWAII, ALASKA & OTHER US TERRITORIES. Please contact us for rates. THIS LIMITED WARRANTY DOES NOT COVER LABOR COSTS OR INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES SUCH AS, BUT NOT LIMITED TO, PHYSICAL INJURIES OR PROPERTY DAMAGE, LOSS OF TIME, LOSS OF USE OF THE VEHICLE, INCONVENIENCE, RENTAL VEHICLE CHARGES, TOWING CHARGES OR ACCOMMODATIONS RESULTING FROM A DEFECT IN OR FAILURE OF THE PART This policy is subject to change without notice. To Avoid the need for a warranty try to handle your supports as noted below. "Shaft down" is the preferred orientation for mounting a Lift Support. An optimum design would permit the support to be oriented shaft down through its entire actuation. If this is not possible then try to install it so that the shaft is pointing downward in the Closed Position. There are several reasons for this: In order to achieve the damping or "cushion" at the end of the Lift Supports stroke, the piston assembly inside of the Lift Support must travel through oil at the end of the stroke. "Shaft down" orientation ensures that the oil is in the proper location for damping to occur. "Shaft down" orientation ensures that the shaft and sealing components are lubricated with every stroke of the Lift Support. This reduces seal wear and helps to inhibit corrosion. Depending on the application, "shaft down" orientation may reduce the rate of gas permeation through the seal, which increases the usable life of the Lift Support. Some reasons why not to change the orientation of the support. 1. Vehicles with power openers must be installed in the same direction as they came from the factory. Sensors on the door are adjusted to work in the way they were programmed. Installing in the opposite direction can cause them not to work properly. 2. Some models of vehicles do not allow space for the cylinder to be reversed and this will cause a binding when the door or window closes. An example of this is the Ford Excursion Rear Window (or liftgate) Please keep in mind the more often that a cylinder is used the longer it will last. Sitting dormant for any period allows the shaft to bind to the seal and eventually tear. If the application must remain dormant then open the lift supports very slowly the first time they are used. The information provided is Subject To Change Without Notice Worry Free Ordering, Buy with Confidence! Check-Out Now! Click the Pay Now button at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after winning an auction or completing a Buy It Now purchases. Check-Out Later If you do not choose to Check-Out now, you will be notified by eBay via e-mail that you are the winning bidder. There is no need to contact us to arrange payment. We will automatically send you an e-mail within three hours of an auction closing. Our message will contain a link to our simple and secure checkout system, where you will be able to quickly and conveniently pay for your purchase. You may also continue purchasing additional items from our auctions or eBay store. You have 2 days from the end of the first purchase to add additional items to your order. Make sure all of your auctions have ended prior to checking out. All of your purchases will be consolidated into one checkout! Payment We accept the following forms of payment. PayPal We accept Pay Pal and Major Credit cards. Contact Us for Credit Card Payments.. Cancellation & Payment issues: Please notify us via e-mail as soon as possible. No issue is too small and we ask that you contact us before the sale gets to the point where you are in default. Once you have placed your order unless we know there is a problem it becomes final and subject to eBay's unpaid item policy. Shipping Orders Within the 48 contiguous states will be shipped: Using FedEx or USPS at our discretion. Orders to Puerto Rico, Hawaii, Guam, Virgin Islands, and other US Territories: Will be shipped via USPS Priority Mail. (For items listed with free shipping this does not apply to these areas) APO, FPO,DPO: Orders are welcome and we will be shipped via USPS Priority Mail. International sales are welcome: They will be shipped via USPS Priority Mail. Duties, Tariffs, and Taxes to countries outside the USA may be billed upon delivery and we cannot assume or cover any of these charges. Please research this before ordering. USPS Shipping Delays to International Destinations: In most cases orders are delivered within 10 working days and are shipped via USPS Priority Mail. Due to customs and postal issues, orders may be delayed several weeks and up to 60 working delays and we have no control over how they are handled. Please make sure that all shipping details are supplied in your address and are correct on the confirmation sent to you after you have placed the order. Express mail and FedEx International shipments are available and we will gladly quote current shipping rates. Duties, Tariffs, and Taxes to countries outside the USA may be billed upon delivery and we cannot assume or cover any of these charges. Please research before ordering. Customer Service Contacting Us: The best way to let us know if there are any issues or concerns is to send us an e-mail using the "ASK A QUESTION" link at the bottom of this listing. In order to be able to assist you quickly we ask that you supply the following information. A) The e-mail address that the order was placed under. B) Any and all numbers or markings that are on your old supports. C) The part numbers that are on the actual supports that you received. (Not the number on the package but the actual supports). D) The year, make, and model of your vehicle and any important details such as Convertible, with or without spoiler, or anything that you think would be helpful. Photos of the issues are great as well. Returns and Exchanges: If the return is due to an error in our listing we will pay all shipping to correct the problem. If the return is due to an error on your part you would be responsible for the return shipping as well as the shipping for the correct units. In the event that an exchange is necessary please contact us for an RGA number and return shipping address. Any items received without authorization are subject to delays and may not receive proper credit. If the product looks different than expected do not install it but rather contact us with the details so that we can make sure it is correct. Our return period is 30 days from the date you received the order so please contact us as soon as you see any issues. Products that have been damaged during installation or altered will not be accepted. Once a return is received and inspected we will refund or exchange the item depending on what has been worked out when the RGA number was sent to you. Normal handling is 2 business days from receipt of the item. Refunds will be applied to whatever the original payment method was. It may take several days to post to your account. Lost Or Damaged Packages: When a package is received damaged, open, or lost in transit we must be notified within 7 days to work with the shipper to correct the issue.

Price: 44.94 USD

Location: Carlsbad, California

End Time: 2024-01-20T22:01:13.000Z

Shipping Cost: 0 USD