Description: This is a kit to create your own rocket from an empty Pringles Chip can! This kit includes the parts you need to turn any full-length Pringles can into a flying model rocket! The instructions take you step-by-step through the process to build a 29mm motor, E-F powered chip container! There are also instructions on how to connect two cans by using a 3 inch model rocket coupler (Coupler not included). Kit includes a pre-weighted, 3D printed, resin, nose cone, (which is heat and UV resistant), Kevlar shock cord, laser-cut plywood centering rings, fins and nose cone plates, and a 4.5" long, 29mm motor tube. You provide the Pringles can(s). This kit is designed to be flown on Estes 29mm E16-4 and F15-4 motors without requiring nose weight. If you fly it on heavier motors, nose weight may be required. This kit does not come with a parachute, or recovery harness. We recommend an 18" to 24" Nylon Parachute, 6X6 Nomex patch, and a recovery harness to fly this rocket. (sold separately - or you may have them already). The Estes E & F motors do not require retention and there are instructions for how to tape them into the rocket included. If you plan to use composite motors, a 29mm screw-on retainer is recommended. Please follow all NAR safety rules when flying this, or any, rocket. Thank you so much for looking.
Price: 19.99 USD
Location: Yuba City, California
End Time: 2024-10-20T00:56:48.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Bad Boy Rocketry
Type: Model Rocket
Set Includes: Building
Features: Resin Nose cone
Subject: Pringles
