Description: A superb and rare photo of an experimental prototype of the famous Porsche 550 RS - Porsche 550 Spyder, photographed during a test session for the Dunlop tire company on the German circuit of Hockenheim in 1953. In that era, Dunlop developed the tires for the Porsche racing cars, and also functioned as their sponsor. Extensive tire testing took place in 1953 with the Porsche 550 Spyder prototypes, which this photograph shows in a wonderful, classic, way. Even today Dunlop still produces tires for classic racing cars. Interestingly, Dunlop does this in their original Fort Dunlop factory in Erdington, Birmingham, UK. This is the original Dunlop tire factory, which opened up 1891! The Porsche 550 Spyder was inspired by the smaller Porsche 356 Spyder which was created and raced by Walter Glöckler in 1951. The Porsche factory specifically designed to build the 550 Spyder in car racing. The 550 was designed as a very low and aerodynamically efficient car. It was so low that former German Formula One racer Hans Herrmann drove it under closed railroad crossing gates during the 1954 Mille Miglia. The 550 became known as Spyder or RS, and gave Porsche its first overall win in a major sports car racing event, the 1956 Targa Florio. Its successor from 1957 onwards, the Porsche 718, was even more successful, scoring points in Formula One as late as 1963. A descendant of the Porsche 550 is generally considered to be the Porsche Boxster S 550 Spyder; the Spyder name was effectively resurrected with the RS Spyder Le Mans Prototype. The Porsche 550 "Little Bastard" is well known as the car in which James Dean died. Interestingly, the 550 is amongst the most frequently reproduced classic automobiles, like the Shelby Cobra and Lotus Seven. Several companies have sprung up in the last 25 years, some of which build near-exact replicas from the ground up, including spaceframes built to exacting specs from Porsche blueprints. Some of the companies that make replicas are Boulder Speedster, Chuck Beck Motorsports, Automotive Legends, Chamonix do Brasil, Thunder Ranch, and Vintage Spyders. Professor Ferdinand Porsche initially started the company called "Dr. ing. h. c. F. Porsche GmbH" in 1931, with main offices at Königstrasse in the center of Stuttgart. The company offered motor vehicle development work and consulting, and did not initially build any cars under its own name. One of the first assignments the new company received was from the German government to design a car for the people, a "Volkswagen" in German. The first Porsche, the Porsche 64, was developed in 1939 using many components from the Volkswagen Beetle. After World War II, Ferdinand Porsche's son, Ferry Porsche, decided to build his own car because he could not find an existing car that he would be interested in buying. The first models of what was to become the 356 were built in a small sawmill in Gmünd, Austria and had aluminum bodywork: the modern Porsche company was born. The prototype car was shown to German auto dealers, and when pre-orders reached a set threshold, production was begun. Many regard the 356 as the first Porsche simply because it was the first model sold by the fledgling company. Porsche commissioned Zuffenhausen-based company Reutter Carosseri, which had previously collaborated with Porsche on Volkswagen Beetle prototypes, to produce the 356's steel body. Porsche constructed an assembly plant across the street from Reutter Carosseri; that assembly plant is now known as Porschestrasse. The 356 was road certified in 1948. Not long afterwards, on January 30, 1951, Ferdinand Porsche died from complications following a stroke. In post-war Germany parts were generally in short supply, so the 356 automobile used components from the Volkswagen Beetle including its engine, gearbox, and suspension. The 356, however, had several evolutionary stages, A, B, and C, while in production and many VW parts were replaced by Porsche-made parts. The last 356s were powered by entirely Porsche-designed engines. The sleek bodywork was designed by Erwin Komenda who also had designed the body of the Beetle. Porsche's signature designs have, from the beginning, featured air-cooled rear-engine configurations (like the Beetle), rare for other car manufacturers, but producing automobiles that are very well balanced. In 1964, after some success in motor-racing, namely with the Porsche 550 Spyder, the company launched the Porsche 911 another air-cooled, rear-engined sports car, this time with a 6-cylinder "boxer" engine. The team to lay out the body shell design was led by Ferry Porsche's eldest son, Ferdinand Alexander Porsche (F. A.). The design phase for the 911 caused internal problems with Erwin Komenda who led the body design department until then. F. A. Porsche complained Komenda made changes to the design not being approved by him. Company leader Ferry Porsche took his son's drawings to neighbouring body shell manufacturer Reuter bringing the design to the 1963 state. Reuter's workshop was later acquired by Porsche (so-called Werk II). Afterward Reuter became a seat manufacturer, today known as Keiper-Recaro. This is a very nice and very rare photo that reflects a wonderful era of Porsche ‘s automotive history in a wonderful way. This is your rare chance to own this photo, therefore it is printed in a nice large format of ca. 8" x 12" (ca. 20 x 30 cm). It makes it perfectly suitable for framing. Shipping costs will only be $ 7.00 regardless of how many photos you buy. For 5 or more photos, shipping is free! (Note: A. Herl, Inc. does not appear on photo, for ebay purposes only) No copyright expressed or implied. Sold as collectable item only. We are clearing out our archives that we have gathered from various sources. All items always sent well protected in PVC clear files and board backed envelopes. We have photographs that came from professional collections and/or were bought from the original photographer or press studio! They are all of professional and excellent quality. After many decades of professionally collecting photographs and posters we are clearing out our archives. They make the perfect gift and are perfectly suited for framing. They will look gorgeous unframed and will be a true asset nicely framed with a border. They are a gorgeous and great asset in every home, workshop, workplace, restaurant, bar or club! First come - first served. And you can always contact us for your requests. Please ask any questions before the auction ends.
Price: 9.75 USD
Location: Utr.
End Time: 2024-05-14T06:54:36.000Z
Shipping Cost: 7 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
