Plug in Motion Sensor Night Light, LED Infrared Sensor Light 6W Light AC 85-265V

Description: 💡【Smart Motion-activated Infrared Sensor】An energy-saving lighting solution with a built-in photoelectric sensor, which controls light activation only in dark or low light conditions. After detecting the movement, it will automatically keep the light for about half a minute, and then turn off by itself or keep the dim light state💡【Flexible and Adjustable Universal Neck】The built-in photocell saves power by automatically turning off the LED lights during the day or when properly illuminated. Safety and security lighting solutions with passive infrared motion sensors that control the light to turn on when motion is detected. Built-in 12 cool white LED batteries and flexible 3.3-inch long arm, you can easily adjust the lighting of different angles or desired areas💡【Application Scope】The product is easy to install, has the characteristics of power saving, long life, no radiation, environmental protection, and explosion-proof. It is widely used in the automatic lighting of corridors, corridors, garages, closets, kitchens, basements and other places💡【High-quality Materials】Metal and plastic, Sensitive Distance：0-5Meter Long service life, high luminous efficiency.. the infrared detection ceases or the sound stops, led light home bulb lights lighting lamp interior design white flashlight waterproof night living colorful outdoor fashion christmas decoration flash decor gifts bright kitchen electronic jewelry new bikes string sport solar remote wedding sensors strip projector head💡【After-sales Service】If you have any problems during use, please contact us immediately. We offer 7/24 customer service to solve your problem and ensure satisfaction Product Description XS-007 Dual Mode LED Infrared Sensor Light Product Description The principle of infrared induction is to receive the infrared energy emitted by the human body through the infrared sensor, and after comparison, send a signal to the processor, and then start the lighting. When the person leaves, keep lighting for a set time, stop lighting or enter low-power lighting.The sensor light sets two modes of sensing functions: I. The infrared sensor is all on and off. II. The infrared sensor is fully bright and slightly bright. Functions I and II are automatically converted by pulling the switch to adapt to different places.Application range: The product is easy to install, has the characteristics of power saving, long life, no radiation, explosion-proof and so on. Widely used in automatic lighting in corridors, corridors, garages, closets, bathrooms, kitchens, basements and other places.Job description: When the switch is in the I position, the light is dimmed (below 15LUX). When people move within the detection range, the infrared sensor lights automatically turn on full-power lighting. When the person leaves, the lighting will continue for 30 seconds and then automatically turn off. When the light is higher than 15LUX, the light will not be sensed.When the switch is in the II position, the light is dimmed (below 15LUX). When people move within the detection range, the infrared sensor lights automatically turn on full-power lighting. When the person leaves, the lighting will continue for 30 seconds, and it will automatically switch to micro-bright, micro-bright power: 0.5-0.8W. When the light is higher than 15LUX, the light will not be turned on. When the light is higher than 20LUX, the light will automatically turn off. Precautions The working temperature is used in the environment of -10℃~+35℃.Do not install in places with large changes in airflow and temperature (such as near windows, air conditioners, stoves, etc.)Keep away from high-power (above 100W) or high-interference lamps for more than 3 meters.Adjust the angle during installation to ensure sensitive induction. Product Specifications Voltage 100-240V 50Hz/60Hz, constant current drive. Power Lamp power: 6.0W, standby power: <0.5W. Temperature White Light: 6000-6500K, Warm Light: 2700-3200K. Induction Light Source 2835 lamp beads: 12PCS, 0.5W/PC, single brightness: 55-60LM/PC. Whole lamp brightness: 400-500LM. Delay Time 30 seconds Sensing Angle About 90 degrees. Induction Distance 4-5 meters (13-16ft). Configure the Light Sensor When the illuminance is greater than 15 Lux, the sensor light does not turn on the lighting. When it is higher than 20LUX, the micro-brightness will automatically turn off. Shell Material PC plastic (lamp body) + light diffusing PC plastic (lamp shade). Widely used in various places to illuminate places with insufficient light Basement Light Garage Light Stair Light Wine Cellar Light

Price: 25.09 USD

Location: Denver, Colorado

End Time: 2025-01-22T06:28:04.000Z

Shipping Cost: 0 USD