Perrin RED Cold Air Intake System for Subaru 2008-2014 WRX and 2008-2015 STi

Description: Perrin Performance Cold Air Intake System MANUFACTURER PART # PSP-INT-322RDColor: RED PERRIN Performance Cold air intake systems place the air filter behind the front bumper, away from the hot exhaust manifold and radiator to constantly draw cool fresh air. The PERRIN cold air intake has been designed with proper MAF alignment and tubing size to maintain proper air fuel ratios, eliminating engine bogging and preventing check engine lights that plague competitive systems. PowerAdd 15-20 WHP to your car. Actual horsepower values will vary depending on other installed hardware, tunes, and overall condition of your vehicle.Precision ConstructionOur intakes are constructed from aluminum tubing, which is precision CNC mandrel bent, for consistent and perfectly fitting parts. Our MAF sensor bung is CNC machined for perfect fit and alignment of MAF sensor to intake. This is crucial for proper air fuel ratios and ECU engine management. Filter TechDryflow filters provide the same level of protection as an oiled filter, but require less maintenance, are less of a mess, and have no risk of over-oiling. The rigid screen inside and around the filter media helps in preventing damage from debris and are ideal for dusty and rough driving conditions. Air StraightenerThe airflow straightener improves MAF readings by forcing incoming airflow into a uniform profile. Smooth and predictable airflow is the key to good, consistent MAF sensor readings for reliable horsepower gains. SoundDuring normal driving, the PERRIN intake sounds relatively stock. However, under load it really comes to life, unlocking the sound of your turbo flat-4. Once installed, the sound of your blowoff valve will be much more prominent, demanding attention and alerting people that your car is undeniably modified. NOTE: *The PERRIN Cold Air Intake for 2008-2014 WRX & 2008-2017 STI are only CARB Approved up to 2015 STI. This intake system requires no tuning to operate properly and safely! However, if you choose to add an upgraded downpipe or tune, you must choose a tune that is specific to either the PERRIN or AEM Intake System. MAF curves for any other intake (including the OEM Air Box) will not work properly and you will damage your engine! Always contact a qualified tuner prior to adding any ECU mapping to your vehicle! Fitment: 2008-2014 Subaru WRX2008-2015 Subaru STi Perrin RED Cold Air Intake System for Subaru 2008-2014 WRX and 2008-2015 STi Perrin RED Cold Air Intake System for Subaru 2008-2014 WRX and 2008-2015 STi Perrin Performance Cold Air Intake System MANUFACTURER PART # PSP-INT-322RDColor: RED PERRIN Performance Cold air intake systems place the air filter behind the front bumper, away from the hot exhaust manifold and radiator to constantly draw cool fresh air. The PERRIN cold air intake has been designed with proper MAF alignment and tubing size to maintain proper air fuel ratios, eliminating engine bogging and preventing check engine lights that plague competitive systems. PowerAdd 15-20 WHP to your car. Actual horsepower values will vary depending on other installed hardware, tunes, and overall condition of your vehicle.Precision ConstructionOur intakes are constructed from aluminum tubing, which is precision CNC mandrel bent, for consistent and perfectly fitting parts. Our MAF sensor bung is CNC machined for perfect fit and alignment of MAF sensor to intake. This is crucial for proper air fuel ratios and ECU engine management. Filter TechDryflow filters provide the same level of protection as an oiled filter, but require less maintenance, are less of a mess, and have no risk of over-oiling. The rigid screen inside and around the filter media helps in preventing damage from debris and are ideal for dusty and rough driving conditions. Air StraightenerThe airflow straightener improves MAF readings by forcing incoming airflow into a uniform profile. Smooth and predictable airflow is the key to good, consistent MAF sensor readings for reliable horsepower gains. SoundDuring normal driving, the PERRIN intake sounds relatively stock. However, under load it really comes to life, unlocking the sound of your turbo flat-4. Once installed, the sound of your blowoff valve will be much more prominent, demanding attention and alerting people that your car is undeniably modified. NOTE: *The PERRIN Cold Air Intake for 2008-2014 WRX & 2008-2017 STI are only CARB Approved up to 2015 STI. This intake system requires no tuning to operate properly and safely! However, if you choose to add an upgraded downpipe or tune, you must choose a tune that is specific to either the PERRIN or AEM Intake System. MAF curves for any other intake (including the OEM Air Box) will not work properly and you will damage your engine! Always contact a qualified tuner prior to adding any ECU mapping to your vehicle! Fitment: 2008-2014 Subaru WRX2008-2015 Subaru STi Perrin Performance Cold Air Intake System MANUFACTURER PART # PSP-INT-322RD Color: RED PERRIN Performance Cold air intake systems place the air filter behind the front bumper, away from the hot exhaust manifold and radiator to constantly draw cool fresh air. The PERRIN cold air intake has been designed with proper MAF alignment and tubing size to maintain proper air fuel ratios, eliminating engine bogging and preventing check engine lights that plague competitive systems. Power Add 15-20 WHP to your car. Actual horsepower values will vary depending on other installed hardware, tunes, and overall condition of your vehicle. Precision Construction Our intakes are constructed from aluminum tubing, which is precision CNC mandrel bent, for consistent and perfectly fitting parts. Our MAF sensor bung is CNC machined for perfect fit and alignment of MAF sensor to intake. This is crucial for proper air fuel ratios and ECU engine management. Filter Tech Dryflow filters provide the same level of protection as an oiled filter, but require less maintenance, are less of a mess, and have no risk of over-oiling. The rigid screen inside and around the filter media helps in preventing damage from debris and are ideal for dusty and rough driving conditions. Air Straightener The airflow straightener improves MAF readings by forcing incoming airflow into a uniform profile. Smooth and predictable airflow is the key to good, consistent MAF sensor readings for reliable horsepower gains. Sound During normal driving, the PERRIN intake sounds relatively stock. However, under load it really comes to life, unlocking the sound of your turbo flat-4. Once installed, the sound of your blowoff valve will be much more prominent, demanding attention and alerting people that your car is undeniably modified. NOTE: *The PERRIN Cold Air Intake for 2008-2014 WRX & 2008-2017 STI are only CARB Approved up to 2015 STI. This intake system requires no tuning to operate properly and safely! However, if you choose to add an upgraded downpipe or tune, you must choose a tune that is specific to either the PERRIN or AEM Intake System. MAF curves for any other intake (including the OEM Air Box) will not work properly and you will damage your engine! Always contact a qualified tuner prior to adding any ECU mapping to your vehicle! Fitment: 2008-2014 Subaru WRX 2008-2015 Subaru STi Perrin RED Cold Air Intake System for Subaru 2008-2014 WRX and 2008-2015 STi Item Description Perrin Performance Cold Air Intake System MANUFACTURER PART # PSP-INT-322RDColor: RED PERRIN Performance Cold air intake systems place the air filter behind the front bumper, away from the hot exhaust manifold and radiator to constantly draw cool fresh air. The PERRIN cold air intake has been designed with proper MAF alignment and tubing size to maintain proper air fuel ratios, eliminating engine bogging and preventing check engine lights that plague competitive systems. PowerAdd 15-20 WHP to your car. Actual horsepower values will vary depending on other installed hardware, tunes, and overall condition of your vehicle.Precision ConstructionOur intakes are constructed from aluminum tubing, which is precision CNC mandrel bent, for consistent and perfectly fitting parts. Our MAF sensor bung is CNC machined for perfect fit and alignment of MAF sensor to intake. This is crucial for proper air fuel ratios and ECU engine management. Filter TechDryflow filters provide the same level of protection as an oiled filter, but require less maintenance, are less of a mess, and have no risk of over-oiling. The rigid screen inside and around the filter media helps in preventing damage from debris and are ideal for dusty and rough driving conditions. Air StraightenerThe airflow straightener improves MAF readings by forcing incoming airflow into a uniform profile. Smooth and predictable airflow is the key to good, consistent MAF sensor readings for reliable horsepower gains. SoundDuring normal driving, the PERRIN intake sounds relatively stock. However, under load it really comes to life, unlocking the sound of your turbo flat-4. Once installed, the sound of your blowoff valve will be much more prominent, demanding attention and alerting people that your car is undeniably modified. NOTE: *The PERRIN Cold Air Intake for 2008-2014 WRX & 2008-2017 STI are only CARB Approved up to 2015 STI. This intake system requires no tuning to operate properly and safely! However, if you choose to add an upgraded downpipe or tune, you must choose a tune that is specific to either the PERRIN or AEM Intake System. MAF curves for any other intake (including the OEM Air Box) will not work properly and you will damage your engine! Always contact a qualified tuner prior to adding any ECU mapping to your vehicle! Fitment: 2008-2014 Subaru WRX2008-2015 Subaru STi Perrin Performance Cold Air Intake System MANUFACTURER PART # PSP-INT-322RD Color: RED PERRIN Performance Cold air intake systems place the air filter behind the front bumper, away from the hot exhaust manifold and radiator to constantly draw cool fresh air. The PERRIN cold air intake has been designed with proper MAF alignment and tubing size to maintain proper air fuel ratios, eliminating engine bogging and preventing check engine lights that plague competitive systems. Power Add 15-20 WHP to your car. Actual horsepower values will vary depending on other installed hardware, tunes, and overall condition of your vehicle. Precision Construction Our intakes are constructed from aluminum tubing, which is precision CNC mandrel bent, for consistent and perfectly fitting parts. Our MAF sensor bung is CNC machined for perfect fit and alignment of MAF sensor to intake. This is crucial for proper air fuel ratios and ECU engine management. Filter Tech Dryflow filters provide the same level of protection as an oiled filter, but require less maintenance, are less of a mess, and have no risk of over-oiling. The rigid screen inside and around the filter media helps in preventing damage from debris and are ideal for dusty and rough driving conditions. Air Straightener The airflow straightener improves MAF readings by forcing incoming airflow into a uniform profile. Smooth and predictable airflow is the key to good, consistent MAF sensor readings for reliable horsepower gains. Sound During normal driving, the PERRIN intake sounds relatively stock. However, under load it really comes to life, unlocking the sound of your turbo flat-4. Once installed, the sound of your blowoff valve will be much more prominent, demanding attention and alerting people that your car is undeniably modified. NOTE: *The PERRIN Cold Air Intake for 2008-2014 WRX & 2008-2017 STI are only CARB Approved up to 2015 STI. This intake system requires no tuning to operate properly and safely! However, if you choose to add an upgraded downpipe or tune, you must choose a tune that is specific to either the PERRIN or AEM Intake System. MAF curves for any other intake (including the OEM Air Box) will not work properly and you will damage your engine! Always contact a qualified tuner prior to adding any ECU mapping to your vehicle! Fitment: 2008-2014 Subaru WRX 2008-2015 Subaru STi Shipping We ship Monday-Friday and strive for orders to ship within 1-2 business days. We use UPS and FedEx for the majority of our orders but reserve the right to use alternative but comparable means to get you your product as quickly and efficiently as possible. All orders will require a physical address, please provide this upon ordering to expedite the shipping process. Even with our huge inventory, we may run out of an item. If this is the case you will receive an email with an expected availability date. Returns & Warranty We offer 30 Day Free Returns. Refunds for returns will be given once the item has been received and inspected. Items must be New, Unused, Not Installed, in the Original Packaging and able to be resold. Incomplete returns may not be eligible for this policy. Please message us to start a return. Warranty on product is replacement of part only for defects in materials and workmanship. No cash or compensation for labor will be given for defects in material and workmanship. Defective part must be returned in order for new part to be provided. OUR COMMITMENT We are committed to making sure that you leave this transaction satisfied. We value your feedback, and we strive to do everything we can to earn Five Stars and Positive Feedback on every order. If you are unhappy with your purchase for any reason, please CONTACT US prior to leaving feedback so that we can make things right for you. Contact Us We encourage our Buyers to communicate with us at any time. Feel free to contact us directly through eBay. All emails will be responded to within 24 hours. We look forward to hearing from you! Powered By 3Dsellers.com - Try for Free!

Price: 268.51 USD

Location: Memphis, Tennessee

End Time: 2024-11-07T09:27:00.000Z

Shipping Cost: 0 USD