Peco #ST-244: Right-hand Double Radius Curved Code 100 NS Turnouts

Description: This variation listing is for used, HO scale, right-hand double radius curved turnouts by Peco.Each has brown ties and Code 100 nickle silver rails. The turnout blades snap nicely between the tracks. The curved turnout has an inside radius of 17¼” while the outside radius is 19⅞”. Overall length is approximately 10¼”.All were used on a layout. Some are in better condition than others so look at the pictures carefully and read the description below so you are aware of the condition of the item you are purchasing. Please note that rail joiners may not be included and none of the turnouts are in their original packaging. Turnout # Description ST-244 #1 In good shape; however the ties with holes for attaching it to a layout are marred. Please note that the factory-installed rail joiners are still attached to the rails. ST-244 #2 In good shape; however the ties with holes for attaching it to a layout are marred. Please note that the factory-installed rail joiners are still attached to the rails. ST-244 #3 In good shape; however the ties with holes for attaching it to a layout are marred. Please note that the factory-installed rail joiners are still attached to the rails. ST-244 #4 In good shape; however the ties with holes for attaching it to a layout are marred and one of the toggle pins for flipping the turnout blades was cut off to accommodate an adjoining track. Please note that the factory-installed rail joiners are still attached to the rails. ST-244 #5 In good shape; however the ties with holes for attaching it to a layout are marred. Please note that the factory-installed rail joiners are still attached to the rails. ST-244 #6 In good shape; however the ties with holes for attaching it to a layout are marred. Please note that the factory-installed rail joiners are still attached to the rails. ST-244 #7 In good shape; however the ties with holes for attaching it to a layout are marred. Please note that the factory-installed rail joiners are still attached to the rails (one of the rail joiners has solder residue on the rail). ST-244 #8 In good shape; however the ties with holes for attaching it to a layout are marred. Please note that one of the factory-installed rail joiners attached to the rails has been removed so buyer will need to provide their own. ST-244 #9 In good shape; however the ties with holes for attaching it to a layout are marred. Also, one of the sleeper ties was cut at an angle to accommodate an adjoining track. Please note that one of the factory-installed rail joiners attached to the rails has been removed so buyer will need to provide their own. ST-244 #10 In good shape; however a hole was drilled in one of the ties for attaching it to a layout and the tie is marred. Please note that one of the factory-installed rail joiners attached to the rails has been removed so buyer will need to provide their own. ST-244 #11 In good shape; however it has solder residue on the rails, one of the sleeper ties is deformed, and the ties with holes for attaching it to a layout are marred. Please note that one of the factory-installed rail joiners attached to the rails has been removed so buyer will need to provide their own. ST-244 #12 In good shape; however it has some residue on the ties and the ties with holes for attaching it to a layout are marred. Please note that one of the factory-installed rail joiners attached to the rails has been removed so buyer will need to provide their own. ST-244 #13 In good shape; however it has solder residue on the rails and the ties with holes for attaching it to a layout are marred. Please note that the factory-installed rail joiners are still attached to the rails. ST-244 #14 In good shape; however the ties with holes for attaching it to a layout are marred. Also, the end of one tie is broken off. Please note that two of the factory-installed rail joiners attached to the rails have been removed so buyer will need to provide their own. ST-244 #15 In good shape; however the ties with holes for attaching it to a layout are marred. Also, one of the sleeper ties was cut at an angle to accommodate an adjoining track. Please note that two of the factory-installed rail joiners attached to the rails have been removed so buyer will need to provide their own. ST-244 #16 In good shape; however the ties with holes for attaching it to a layout are marred and there is solder residue on the rails. Also, one of the toggle pins for flipping the turnout blades and several ties near it were cut off to accommodate an adjoining track. Please note that one of the factory-installed rail joiners attached to the rails has been removed so buyer will need to provide their own. ST-244 #17 In good shape; however the ties with holes for attaching it to a layout are marred and there is solder residue on the rails. Also, one of the toggle pins for flipping the turnout blades and several ties near it were cut off to accommodate an adjoining track. Please note that all of the factory-installed rail joiners attached to the rails have been removed so buyer will need to provide their own. ST-244 #18 In good shape; however ties with holes for attaching it to a layout are marred. Please note that the factory-installed rail joiners are still attached to the rails. ST-244 #19 It is in good shape; however, clip and spring for snapping the turnout blades between the rails is missing. So, in order to flip the blades tightly to the rails, I have included a new/unused switch motor (Peco #PL-10). (Buyer will need to add the motor and provide the turnout control switch.) Also, it has solder residue on the rails and the ties with holes for attaching it to a layout are marred. Please note that one of the factory-installed rail joiners attached to the rails has been removed so buyer will need to provide their own. The lighting I used to take the pictures may show the top of the rails as being tarnished but they are not (as different views should show). However, I will be happy to send additional pictures if desired.) Normal 0 false false false EN-US X-NONE X-NONE Item is described as well as possible, but is sold "as is" so please contact me if you have any questions. This is one of numerous HO turnouts I am selling. I will combine multiple items to reduce shipping whenever possible. If you purchase this item and others I am selling, please request an invoice to receive a combined shipping discount. To request an invoice, either: select “Request total” from the “More actions” drop-down menu on the Purchase history page, or, access your eBay cart and then request an invoice (should be shown above items). I will reply with an invoice reflecting the combined shipping charge. Note: some buyers have indicated eBay’s system will not allow them to request a total from me when using their smart phone. If you are unable to request a total and do not have access to a PC, you will have to purchase the items and pay each item’s separate shipping cost. However, I will refund any shipping overage. Unless other arrangements are made, payment is to be made within two days after purchase or invoice is sent. Check out my other listings for more turnouts and out-of-production or hard-to-find kits, especially Athearn "blue-box "kits. Athearn discontinued manufacturing them in 2009, so they are becoming scarce and hard to find. With Athearn’s purchase of Model Die Casting, Inc., the MDC/Roundhouse kits have also been discontinued and are no longer available.

Price: 29.99 USD

Location: Austin, Texas

End Time: 2024-09-01T22:53:01.000Z

Shipping Cost: N/A USD