Paasche Airbrush System w/H-1AS Airbrush, DA300R Compressor & Quick Connect

Description: Paasche DA300R Airbrush Compressor w/ H Single Action Airbrush & Quick Disconnect H-1AS (formerly 2000H) Single Action - External Mix - Siphon Feed Airbrush: This single action airbrush features a chrome plated body for durability. Airbrush is assembled with size #3 head. Which allow the H airbrush to be used in a wide range of application. The H single action allows the user to achieve fine lines down to 1/16 inch and wider patterns of up to 1-1/2 inches. It simple and easy to use and requires very little practice compared to double action models. The best uses are those requiring more basic spraying like solid coats, uniform lines or stencil work. Clean up is as simple as spraying your paint cleaner though the airbrush. The H is used for many applications including hobby, craft, chip and ding repair, taxidermy, ceramics, cake decorating, tanning, tattoos, etc. The H airbrush is made in the USA. H-1AS Includes: H#3 airbrush, 1 oz bottle assembly, 1 oz storage bottle, hanger, wrench, 6 foot braided air hose, lessons booklet and manual Features: Airbrush Made In The USA Highly polished & hardened stainless steel needles for long life and reduced clogging Solvent proof needle packing allow spraying of water & solvent based paints Chrome plated body Specs: Part Number: H-1AS Type: Single Action, External mix, Siphon feed Head Size: Size 3 (.65mm) Fluid Packing: Can spray solvent or water based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼"-20 Thread (Paasche thread) - adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32" to 1-1/2" Weight: 1 Lbs Finish: Chrome plated body The DA300R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DA300R is light weight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Delivers 1-35 PSI depending on airbrush being used · Standard Paassche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature · Carrying handle · Quiet: noise level is 47 Db’s The A-191 Quick connect is included and allows for fast and easy removal of airbrush from the air hose. Payment We accept payment by any of the following methods: PayPal Orders will be processed for shipment once payment is received. Shipping Your order will be Shipped within 1-2 working day of receiving payment (Monday-Friday) and you should expect to receive it 1-5 work days after dispatch. Tracking number will be sent after shipment. Returns If you are not 100% satisfied with your purchase, you can return the product and get a refund. You can return a product for up to 30 days from the date you purchased. Any product you return must be in the same condition you received it and in the original packaging. Customer pays return shipping. E-mail for an RGA authorization.H-1AS Single Action - External Mix - Siphon Feed Airbrush: This single action airbrush features a chrome plated body for durability. Airbrush is assembled with size #3 head. Which allow the H airbrush to be used in a wide range of application. The H single action allows the user to achieve fine lines down to 1/16 inch and wider patterns of up to 1-1/2 inches. It simple and easy to use and requires very little practice compared to double action models. The best uses are those requiring more basic spraying like solid coats, uniform lines or stencil work. Clean up is as simple as spraying your paint cleaner though the airbrush. The H is used for many applications including hobby, craft, chip and ding repair, taxidermy, ceramics, cake decorating, tanning, tattoos, etc. The H airbrush is made in the USA. H-1AS Includes: H#3 airbrush, 1 oz bottle assembly, 1 oz storage bottle, hanger, wrench, 6 foot braided air hose, lessons booklet and manual Features: Airbrush Made In The USA Highly polished & hardened stainless steel needles for long life and reduced clogging Solvent proof needle packing allow spraying of water & solvent based paints Chrome plated body Specs: Part Number: H-1AS Type: Single Action, External mix, Siphon feed Head Size: Size 3 (.65mm) Fluid Packing: Can spray solvent or water based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼"-20 Thread (Paasche thread) - adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32" to 1-1/2" Weight: 1 Lbs Finish: Chrome plated body The DA300R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DA300R is light weight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Delivers 1-35 PSI depending on airbrush being used · Standard Paassche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature · Carrying handle · Quiet: noise level is 47 Db’s The A-191 Quick connect is included and allows for fast and easy removal of airbrush from the air hose. Paasche DA300R Airbrush Compressor w/ H Single Action Airbrush & Quick Disconnect H-1AS Single Action - External Mix - Siphon Feed Airbrush: This single action airbrush features a chrome plated body for durability. Airbrush is assembled with size #3 head. Which allow the H airbrush to be used in a wide range of application. The H single action allows the user to achieve fine lines down to 1/16 inch and wider patterns of up to 1-1/2 inches. It simple and easy to use and requires very little practice compared to double action models. The best uses are those requiring more basic spraying like solid coats, uniform lines or stencil work. Clean up is as simple as spraying your paint cleaner though the airbrush. The H is used for many applications including hobby, craft, chip and ding repair, taxidermy, ceramics, cake decorating, tanning, tattoos, etc. The H airbrush is made in the USA. H-1AS Includes: H#3 airbrush, 1 oz bottle assembly, 1 oz storage bottle, hanger, wrench, 6 foot braided air hose, lessons booklet and manual Features: Airbrush Made In The USA Highly polished & hardened stainless steel needles for long life and reduced clogging Solvent proof needle packing allow spraying of water & solvent based paints Chrome plated body Specs: Part Number: H-1AS Type: Single Action, External mix, Siphon feed Head Size: Size 3 (.65mm) Fluid Packing: Can spray solvent or water based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼"-20 Thread (Paasche thread) - adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32" to 1-1/2" Weight: 1 Lbs Finish: Chrome plated body The DA300R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DA300R is light weight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Delivers 1-35 PSI depending on airbrush being used · Standard Paassche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature · Carrying handle · Quiet: noise level is 47 Db’s The A-191 Quick connect is included and allows for fast and easy removal of airbrush from the air hose. Returns If you are not 100% satisfied with your purchase, you can return the product and get a refund. You can return a product for up to 30 days from the date you purchased. Any product you return must be in the same condition you received it and in the original packaging. Customer pays return shipping. E-mail for an RGA authoization. Payment We accept payment by any of the following methods: PayPal Orders will be processed for shipment once payment is received. Shipping Your order will be Shipped within 1-2 working day of receiving payment (Monday-Friday) and you should expect to receive it 1-5 work days after dispatch. Tracking number will be sent after shipment. H-1AS Single Action - External Mix - Siphon Feed Airbrush: This single action airbrush features a chrome plated body for durability. Airbrush is assembled with size #3 head. Which allow the H airbrush to be used in a wide range of application. The H single action allows the user to achieve fine lines down to 1/16 inch and wider patterns of up to 1-1/2 inches. It simple and easy to use and requires very little practice compared to double action models. The best uses are those requiring more basic spraying like solid coats, uniform lines or stencil work. Clean up is as simple as spraying your paint cleaner though the airbrush. The H is used for many applications including hobby, craft, chip and ding repair, taxidermy, ceramics, cake decorating, tanning, tattoos, etc. The H airbrush is made in the USA. 2H-1AS Includes: H#3 airbrush, 1 oz bottle assembly, 1 oz storage bottle, hanger, wrench, 6 foot braided air hose, lessons booklet and manual Features: Airbrush Made In The USA Highly polished & hardened stainless steel needles for long life and reduced clogging Solvent proof needle packing allow spraying of water & solvent based paints Chrome plated body Specs: Part Number: H-1AS Type: Single Action, External mix, Siphon feed Head Size: Size 3 (.65mm) Fluid Packing: Can spray solvent or water based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼"-20 Thread (Paasche thread) - adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32" to 1-1/2" Weight: 1 Lbs Finish: Chrome plated body The DA300R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DA300R is light weight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Delivers 1-35 PSI depending on airbrush being used · Standard Paassche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature · Carrying handle · Quiet: noise level is 47 Db’s The A-191 Quick connect is included and allows for fast and easy removal of airbrush from the air hose.

Price: 194 USD

Location: Bristol, Wisconsin

End Time: 2023-11-23T20:46:59.000Z

Shipping Cost: 0 USD