Outback Power, Mate, Remote Monitor & Control

Description: Free Shipping is for the contiguous United States Only.OutbackMATE Outback Power SystemsMateSystem ManagementRemote Monitor & ControlMATEAs a complete management tool for OutBack Power systems, the MATE Remote Monitor & Controller is packed full of features to make system management simple. It provides a display of the operation as well as allows control and adjustment of the setpoints. The OutBack Mate also coordinates the operation of the entire system to maximize performance and to prevent multiple products from conflicting.A single MATE can remotely manage and monitor multiple inverter/chargers, charge controllers and monitoring devices. The easy-to-read 3.1" (8 cm) LCD is backlit for dark operating conditions. Four soft keys allow easy context-based navigation of menus and functions. Two hot keys give immediate access to AC and inverter functions. A built-in clock and calendar function enables timer-based programming of inverter and charger operation, allowing the system to operate with time-of-day power rates or limit a generator's run time to a specific time period of the day or week. All settings are stored in permanent memory to eliminate the need to reprogram in the event of a system shutdown or battery replacement.The MATE includes a RS232 port with DB9 jack for connection to the serial port of a PC computer. The MATE system display and controller is surface-mounted.FeaturesA single MATE is able to connect up to ten OutBack products via CAT 5 / ethernet type cabling with 8 wire RJ45 modular connectors and the OutBack HUB-4 Communication Manager or HUB-10 Communication Manager.4 line backlit LCD display with 80 alphanumeric characters. This allows multiple measurements to be displayed at the same time and reduces the amount of abbreviations required, simplifying the operation and reducing confusion. All of the programmed setpoints are stored in permanent memory to eliminate the need to reprogram the system after a shutdown or battery replacement.Includes a built in real time clock and calendar which allows programming of the inverter operation based on the time of day and even day of the week. This can be used to allow the system to work with time-of-day power rates or to limit a generator's run time to a specific time period of the day or week.SpecificationsThe MATEInterface Display4 line 80 character backlit LCD - Alphanumeric with graphic symbolsControl Keypad6 backlit silicone membrane keys- dedicated inverter and AC input keysStatus IndicatorsTwo LED Status Indicators : Green = Inverter Yellow = AC InputCommunication ProtocolProprietary OutBack Multi-drop using an OutBack HUBInterconnection CablingStandard CAT 5 network cable with RJ45 modular jack- 10 ft includedPC Computer InterfaceRS232 opto-isolated DB9 jack 9600 baud serial communicationMicroprocessor16 MHz low power consumption versionSetpoint and Data Memory32K non-volatile flash RAMClock / CalendarOn-board real time clock with battery backupAudible Indicator2 KHz TransducerEnvironmental RatingIndoor Type 1 Optional outdoor Type 3R transparent lockable coverDimensions5.75" W x 4.25" H x 2" D (14.6 cm x 10.8 cm x 5.08 cm)Shipping Weight1 lbWarrantyTwo years parts and labor Optional Extended WarrantyCompatible DevicesOnly compatible with older Outback Inverter models. NOT compatible with FXR/VFXR Inverters and Radian Inverter/Chargers.ADD-ONSOutback FW MATE Mounting Bracket with HardwareFlexNet DC System MonitorOutback Power Flexware FW-MP Mounting PlateOutback Hub-4 Communication Manager, 4 Port

Price: 398.75 USD

Location: New Holland, Pennsylvania

End Time: 2024-09-10T13:19:20.000Z

Shipping Cost: 0 USD