ODROID-H3 / H3+

Description: ODROID-H3 / H3+ ODROID-H3 and H3+ have the same form factor and similar power efficiency as their predecessor, the ODROID-H2+. However, the H3 and H3+ are more powerful, offering higher performance. You’ll need to supply your own memory and storage (check the recommended accessories on this page) — but since the ODROID-H3 family uses the same components commonly found in modern laptops, you should have no trouble finding compatible hardware to fill out your SBC. ONLY NVMe M.2 SSD ARE COMPATIBLE: PCIe NVMe M.2 SSD Both models of ODROID-H3 feature two SO-DIMM slots for memory, two SATA ports and one M.2 NVMe slot for storage, two 2.5 GbE ports, two USB 3.0 ports, two USB 2.0 ports and more! ODROID-H3: Intel quad-core Jasper Lake N5105 processor ODROID-H3: Intel quad-core Jasper Lake N6005 processor Additional items required to operate - see "REQUIRED ITEMS" section below. KEY FEATURES SoC: H3: Intel Jasper Lake N5105 quad-core processor, base clock of 2.0GHz and boost up to 2.9 GHz H3+: Intel Jasper Lake N6005 quad-core processor, base clock of 2.0GHz and boost up to 3.3 GHz GPU: H3: Intel UHD Graphics 24 EUs Turbo 800MHz H3+: Intel UHD Graphics 32 EUs Turbo 900MHz System Memory – Dual-channel Memory DDR4 PC4-23400 (2933MT/s) supporting up to 64GB RAM in total Storage – M.2 PCIe 3.0 x4 slot for one NVMe storage, 2x SATA 3.0 ports, eMMC flash support Video Output HDMI 2.0 up to 4K (4096×2160) @ 60 Hz DisplayPort 1.2 up to 4K (4096×2160) @ 60 Hz Audio – HDMI, audio jacks for HP, MIC. and S/PDIF Connectivity – Dual 2.5 Gigabit Ethernet (RJ45) Expansion – 24-pin header with I2C, UART (3.3V), USB2.0 and HDMI CEC signals SSE4.2 accelerator (SMM, FPU, NX, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AES) A configurable Unlimited Performance mode allowing the CPU to run in sustained turbo boost mode Misc – RTC battery (Included) Power Supply – 14V to 20V DC power input Dimensions – 110x110x43mm Weight – About 320 grams with heatsink, two DRAM modules, and M.2 NVMe SSD. REQUIRED ITEMS (NOT INCLUDED) No power supply included - 15VDC/4A power supply required No RAM pre-installed - DDR4 SODIMM DDR3/DDR5 is not supported No eMMC Module or SSD included M.2 SATA SSD is not supported (only NVMe SSD) No case included No HDMI cable included - needed to connect to a display device. Recommend HDMI2.0 cable to support 4K output table { width: 100%; border-collapse: collapse; } table, th, td { border: 1px solid #ddd; } th, td { padding: 8px; text-align: left; } th { background-color: #f2f2f2; } SPECIFICATIONS Processor Intel Celeron N5105(H3+: N6005) Processor (10nm, Quad-Core, TDP 10W) H3(N5105): up to 2.9GHz H3+(N6005): up to 3.3GHz 4MB L2 Cache Intel UHD Graphics (24/32 EU up to 900MHz) Memory 2 x DDR4 1.2V SO-DIMM slots, Dual Channel, up to 2933 MT/s (DDR4-PC23400) Max memory capacity 64GB DDR3/DDR5 are not supported Storage 1 x eMMC connector (bootable and selectable on BIOS) 2 x SATA3 6Gbps 1 x M.2 slot (PCIe 3.0 x 4, supports NGFF-2280 cards) M.2 SATA SSD is not supported Networking 2 x GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps) Realtek RTL8125B Supports Wake-On-Lan LED indicators (Green: Link, Amber: Traffic) Video 1 x DisplayPort 1.2 (up to 4K@60Hz) 1 x HDMI 2.0 (up to 4K@60Hz) Dual simultaneous display support Audio 1 x Audio out (3.5mm jack) 1 x Audio in (3.5mm jack) 1 x SPDIF out (ALC1200, HDA codec) * HDMI & DP have audio output too. External I/O 2 x USB 3.0 Host ports 2 x USB 2.0 Host ports 1 x Peripheral Expansion Header (24-pin, 2.54mm pitch) 1 x DC 5V, 1 x DC 3.3V, 5 x GND 1 x UART (TXD/RXD/RTS/CTS) 2 x I2C (SCL/SDA) 1 x External Power Button HDMI CEC, 5VA+ Three USB 2.0 ports All 3.3V I/O signal level Other Features Passive Heatsink BIOS Backup Battery Maintains system time and BIOS settings Power Button Reset Button System LEDS Indicators: Red (PWR) – Solid light when DC power is supplied Blue (left, SLEEP) – turns off only when the system enters into suspend mode Blue (right, PMIC) – turns on only when the major power rails are working Amber (SATA) – Flashes when SATA data transfers Green (NVMe) – Flashes when NVMe data transfers Active Cooling Fan Connector (12V 4-pin, PWM input + TACHO output) Active Cooling Fan is optional Connector (4-pin, 2.54mm pitch) Power DC jack: outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm DC 14V ~ 20V (up to 60W) DC 15V/4A power adapter is recommended if you don’t use two 3.5“ HDDs DC 19V/7A power adapter is recommended if you use two 3.5” HDDs together Power consumption: IDLE: ≃1..9W CPU Stress: ≃15W CPU+GPU Stress: ≃18W Power-off: ≃0.25W Suspend: ≃0.6W Form Factor 110mm x 110mm x 47mm Approx. A. CPU (Intel Celeron N5105) B. 2 x DDR4 SO-DIMM slots (Dual channel memory support) C. 1 x M.2 PCI Express Module Socket (NGFF-2280) D. 1 x eMMC (Embedded Multimedia-Card) Socket E. 2 x SATA Power Connectors (2.5mm pitch, JST-XH compatible connector) F. 2 x SATA3 6.0 Gb/s Data Connectors G. 1 x DC Power Jack H. 2 x USB 3.0 I. 2 x USB 2.0 J. 1 x HDMI 2.0 K. 1 x DisplayPort 1.2 L. 2 x RJ45 Ethernet Ports (10/100/1000/2500) M. 5 x System LED Indicators N. 1 x Peripheral Expansion Header (24-pin) O. 1 x Power Switch P. 1 x Reset Switch Q. 1 x Backup Battery Connector (2-pin) R. 1 x Active Cooling Fan Connector (4-pin) S. 1 x Audio out, 1 x Audio in, 1 x SPDIF out LINKS Installation - https://wiki.odroid.com/odroid-h3/start#installation WiKi - https://wiki.odroid.com/odroid-h3/start Introduction - https://dn.odroid.com/ODROID-H2/H3_pics/H3_H3+_Introduction.pdf VIDEOS SPECIFICATIONS Processor Intel Celeron N5105(H3+: N6005) Processor (10nm, Quad-Core, TDP 10W) H3(N5105): up to 2.9GHz H3+(N6005): up to 3.3GHz 4MB L2 Cache Intel UHD Graphics (24/32 EU up to 900MHz) Memory 2 x DDR4 1.2V SO-DIMM slots, Dual Channel, up to 2933 MT/s (DDR4-PC23400) Max memory capacity 64GB DDR3/DDR5 are not supported Storage 1 x eMMC connector (bootable and selectable on BIOS) 2 x SATA3 6Gbps 1 x M.2 slot (PCIe 3.0 x 4, supports NGFF-2280 cards) M.2 SATA SSD is not supported Networking 2 x GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps) Realtek RTL8125B Supports Wake-On-Lan LED indicators (Green: Link, Amber: Traffic) Video 1 x DisplayPort 1.2 (up to 4K@60Hz) 1 x HDMI 2.0 (up to 4K@60Hz) Dual simultaneous display support Audio 1 x Audio out (3.5mm jack) 1 x Audio in (3.5mm jack) 1 x SPDIF out (ALC1200, HDA codec) * HDMI & DP have audio output too. External I/O 2 x USB 3.0 Host ports 2 x USB 2.0 Host ports 1 x Peripheral Expansion Header (24-pin, 2.54mm pitch) 1 x DC 5V, 1 x DC 3.3V, 5 x GND 1 x UART (TXD/RXD/RTS/CTS) 2 x I2C (SCL/SDA) 1 x External Power Button HDMI CEC, 5VA+ Three USB 2.0 ports All 3.3V I/O signal level Other Features Passive Heatsink BIOS Backup Battery Maintains system time and BIOS settings Power Button Reset Button System LEDS Indicators: Red (PWR) – Solid light when DC power is supplied Blue (left, SLEEP) – turns off only when the system enters into suspend mode Blue (right, PMIC) – turns on only when the major power rails are working Amber (SATA) – Flashes when SATA data transfers Green (NVMe) – Flashes when NVMe data transfers Active Cooling Fan Connector (12V 4-pin, PWM input + TACHO output) Active Cooling Fan is optional Connector (4-pin, 2.54mm pitch) Power DC jack: outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm DC 14V ~ 20V (up to 60W) DC 15V/4A power adapter is recommended if you don’t use two 3.5“ HDDs DC 19V/7A power adapter is recommended if you use two 3.5” HDDs together Power consumption: IDLE: ≃1..9W CPU Stress: ≃15W CPU+GPU Stress: ≃18W Power-off: ≃0.25W Suspend: ≃0.6W Form Factor 110mm x 110mm x 47mm Approx. A. CPU (Intel Celeron N5105) B. 2 x DDR4 SO-DIMM slots (Dual channel memory support) C. 1 x M.2 PCI Express Module Socket (NGFF-2280) D. 1 x eMMC (Embedded Multimedia-Card) Socket E. 2 x SATA Power Connectors (2.5mm pitch, JST-XH compatible connector) F. 2 x SATA3 6.0 Gb/s Data Connectors G. 1 x DC Power Jack H. 2 x USB 3.0 I. 2 x USB 2.0 J. 1 x HDMI 2.0 K. 1 x DisplayPort 1.2 L. 2 x RJ45 Ethernet Ports (10/100/1000/2500) M. 5 x System LED Indicators N. 1 x Peripheral Expansion Header (24-pin) O. 1 x Power Switch P. 1 x Reset Switch Q. 1 x Backup Battery Connector (2-pin) R. 1 x Active Cooling Fan Connector (4-pin) S. 1 x Audio out, 1 x Audio in, 1 x SPDIF out LINKS Installation - https://wiki.odroid.com/odroid-h3/start#installation WiKi - https://wiki.odroid.com/odroid-h3/start Introduction - https://dn.odroid.com/ODROID-H2/H3_pics/H3_H3+_Introduction.pdf VIDEOS × × × × × Shipping info Click the Shipping & Payments tab above the listing description for more info Price: $12.95 (local shipping) See more... USPS Ground Advantage - $12.95 Standard International Shipping - $40.95 Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © ameriDroid Shipping & Payments Shipping is a flat rate across US at a rate of $12.95 Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 202.95 USD

Location: Ukiah, California

End Time: 2024-09-03T16:11:15.000Z

Shipping Cost: 12.95 USD